|
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed. |
| 2 | Excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. |
| 3 | Removing excavated material(soil) not exceeding 50 meter and depositing where directed at a level not exc. 1.5 meter above the starting point complete all as specified and as directed. |
| 4 | Returning, filling in , including spreading , leveling , watering and well ramming in layers not exc. 25 cm (soft / loose soil ) complete all as specified and as directed. |
| 5 | M&L for Cement concrete 1:4:8 Type D-2 (using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete complete all as specified and as directed. |
| 6 | M & L for TMT bars 10 mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to grade Fe-500D, complete all as specified and as directed. |
| 7 | All as per srl item No 6.00 here-in-before but 8 mm dia as in stirrups. |
| 8 | M& L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter finsihed fairs surfaces of concerete complete all as specified and as directed. |
| 9 | M&L for Reinforced cement concrete M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed. |
| 10 | M& L for formwork to to edges of concreteflats, breaks in floors, openingsin concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide for fair finished surfaces complete all as specified and as directed. |
| 11 | M&L for reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and as directed. |
| 12 | M&L for reinforced cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and as directed. |
| 13 | M&L for from work to soffits of suspended slabs such as roof slabs, floor slabs, landing & similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces, complete all as specified and as directed. |
| 14 | M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 15 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specifie and as directed. |
| 16 | M & L for half brick thick brick work with sub class B old size burnt bricks straight or curved on plan to any radius in walls built in cement mortar 1:4 complete all as specifie and as directed. |
| 17 | M&L for rendeing 15 mm thick with ready mix plaster on stone/ brick masonary surface other then fair faces surfaces finished even and smooth without using extra cement including scaffolding arrangement to carry out the work complete all as specified & directed. |
| 18 | M&L for rendeing 10 mm thick with rady mix plaster on fair faces of brick work finished even and smooth without using extra cement complete all as specified & directed. |
| 19 | Supply only intergal water proofing compound complete all as specified and as directed. |
| 20 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper using painting roller over one coat of chalk whitening complete all as specified and directed by engineer in charge. |
| 21 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resisitant primer complete all as specified and as directed. |
| 22 | S&F PVC Connecton pipe (PVC) 15 mm dia and 450/600mm long complete all as specified and as directed. |
| 23 | Supplying and fixing 25 mm outer dia CPVC pipes SDR 11 & CPVC plain and brass threaded (Elbow, Tee, Male Female adaptor etc) SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 24 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing. complete all as specified and as directed. |
| 25 | Supplying and fixing 20 mm outer dia CPVC pipes SDR 11 & CPVC plain and brass threaded (Elbow, Tee, Male Female adaptor etc) SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 26 | S&F bib taps 15mm dia fancy type brass Chromium Plated with long body screwed down for iron pipe and fixed complete all as specified and as directed. |
| 27 | S&F in repairs uPVC multi floor trap with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and as directed. |
| 28 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 29 | S&F 15 mm bore brass chromium plated stop/ angle valve fancy type cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle at ends including necessary extention piece complete all as specified and as directed. |
| 30 | S&F 20 mm bore brass chromium plated stop valve fancy type cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle at ends including necessary extention piece complete all as specified and as directed. |
| 31 | S&F vitrious china white wash hand basin flat back white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in CM 1:4 type complete all as specified and as directed. |
| 32 | S&F 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and as directed. |
| 33 | S&F vitreous china wash down water closet pan ( pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including seat cover complete all as specified. |
| 34 | S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed. |
| 35 | S&F 450mmx600mm bevelled edge looking mirror of selected quality fixed with brass CP screw fixed with back side of decorative board includind aluminum beading complete all as directed. |
| 36 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 37 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 38 | M & L for 75 mm thick cement concrete type D-2 1:4:8 using 40mm graded crushed stone aggregate cas in sub base complete all as specified and as directed. |
| 39 | M & L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10 mm thick backing coat of cement mortar 1:4, complete all as specified and as directed. |
| 40 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed. |
| 41 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 42 | M&L for reinforced cement concrete (Nominal mix) 1:2:4 (20 mm graded crushed stone aggregate) as lintels upto 1.5 m clear span, cills, steps, sesmic and and the like complete all as specified and as directed. |
| 43 | S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia ofwire and average width ofaperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 44 | S & F 150 mm handles, cast type, anodised complete all as specified and as directed. |
| 45 | S & F 200 mm aluminium, anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 46 | S & F butt hinges 100 mm type B-21 aluminium extruded section and fixed complete all as specified and as directed. |
| 47 | S&F for 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and as directed. |
| 48 | S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 49 | S&F 200 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 50 | S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 51 | S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 52 | S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 53 | S & F rotational moulded HDPE water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut, tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed. |
| 54 | S & F 605x605 mm Galvanised powder coated snap grid frame works for false ceiling including fixing of arrangement including hanging.The snap grid shall be consist of aluminium main/cross tee of size 24mmx32mmx 0.30mm and 15mm x32mmx0.30mm. The snap grid frame shall fixed to ceiling with supporting hangers consisting of 4 mm dia GI wire with necessary bolts and nuts and washers including 12mm thick gypsum board false ceiling complete all as specified and as directed. |
| 55 | S & F 605x605 mm Galvanised powder coated snap grid frame works for false ceiling including fixing of arrangement including hanging.The snap grid shall be consist of aluminium main/cross tee of size 24mmx32mmx 0.30mm and 15mm x32mmx0.30mm. The snap grid frame shall fixed to ceiling with supporting hangers consisting of 4 mm dia GI wire with necessary bolts and nuts and washers including 6 mm thick non asbestos fibre cement building false ceiling complete all as specified and as directed. |
| 56 | S & F Health faucet (ABS Body) mild steelchromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 57 | S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 58 | M&L for providing,Type B-1 1:2:4, 20mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 59 | M&L 15mm thick cement mortar in (1:4) with water proofing compound on roof complete all as specified and as directed. |
| 60 | M&L for roof treatment in following stages, complete all as specified and as directed :-(i) Preparation of concrete surfaces by wire brush and cleaned top surfaces of cement concrete . (ii) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per sqm including cleaning surfaces(iii) APP polymeric water proofing membrane minimum 3 mm thick and wieghing not less than 3.5 Kg per Sqm, black finish reinforced with non woven polyester matt with a thermo fasable finish laid over bitumen primer @ 0.5Kg/Sqm by torching application with a propane or a butrane gas torch with an overlap of 100 mm at the sides and 150mm at the ends, as per manufacturers instructiions incl preparation of surface and applying two coats of aluminium paint over membrane (Manufacturer as approved by GE). |
| 61 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 62 | S&F anodised aluminium frame Powder coated (minimum thickness of powder coating 50 micron for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 63 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed. |
| 64 | S & F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed. |
| 65 | S& F 4.8 mm thick Sheet glass, ordinary quality and glazing with AL snap beading in square exc 0.5 sq. m in each pane including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 66 | S&F 100 mm mortice latch with two levers (vertical type), aluminium anodised body and fixed complete all as specified and as directed. |
| 67 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 68 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc including brushing neat cement slurry with 3.0 Kg of cement per sq. metre complete all as specified and as directed. |
| 69 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) as in flooring complete all as specified and as directed. |
| 70 | M&L for preparation of old surfaces and applying two coat of oil bound distemper complete all as specified and as directed. |
| 71 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and as directed. |
| 72 | M&L for hardcore (Broken stone or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding. 15 cm thick, watered and rammed to a true surface all as specified and as directed. |
| 73 | M&L for cement concrete Type B-2 (1:2:4) (40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete all as specified and as directed. |
| 74 | S&F mild steel rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Confirming (Fe-410- W(Gde- E-250) quality- B complete all as specified and as directed. |
| 75 | S&F 2 mm thick Fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed. |
| 76 | M&L for preparation of new steel surface of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of zinc chrome red oxide complete all as specified and as directed. |
| 77 | Excavation in trenches in soft/loose soil, not exc 1.5 m wide & not exceeding 1.5 m in depth as in foundation , sewage line etc. not exceeding 10 sqm on plan and getting out complete all as specified & as directed. |
| 78 | M&L for 15mm thick cement plaster cement mortar (1:4) on fair faces of briick or concrete surfaces, finished fair & even without using extra cement, complete all as specified. |
| 79 | M&L for 170 mm nominal bore (DWC HDPE) Double wall corrugated high density polyethylene pipe (SN8) Conforming to IS 16098 (Part 2) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed. |
| 80 | M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes 170 mm bore including packing under and haunching against sides of pipes after they are laid and tested, complete all as specified. |
| 81 | S&F in repairs SFRC manhole/drain cover size (1200 X 600 x 70 )mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE” (ii) Contractor will provide manufactuerer test certificate of SFRC cover & frame |
| 82 | M&L in repair, salt glazed stone ware gully trap, square or round mouthed,150mm x 150 mm size, shape as required,including dismantling and taking out of old GT and jointing with old connection and pipes complete all as specified and directed. |
| 83 | &L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM1:4 complete all as specified and as directed. |
| 84 | Extra for forming fair furnished drain or channels 30 cm inner girth in cement concrete using cement including forming moulds,mitred/stopped ends etc all as specified. |
| 85 | Construction of soakage well including execution in all type of soil, foundation in PCC 1:3:6, wells of honey combed & soiled brick masonry in CM 1:4, RCC bord, RCC Cover slab M-25/SFRC manhole cover, interconnecting pipe of RCC/DWC complete filled with brick bats of Soakage well size 1.6 meter internal diameter x 3.0 meter effective depth complete all as specified ad as shown on drawing No DZ-1124-R. |
| 86 | S & F aluminium composite panels Ceiling /cladding /partation /top /ventilator /window and door of approved make having total thickness of 4 mm (Top coil -0.5mm, non Toxic PE-Core-3 mm and back Coil -0.50 mm) with 25 micron PVdF Coating on top coil and polyester/epoxy coating on back coil (4-7 Microns) on aluminium substructure fixed with 19 mm x 12 mm x 1.6 mm aluminium cleat & 10 x 100 mm SS Wooden screw with PVC plug on faced horizontal/ vertical surfaces of rectangular with including neccessary aluminium frame,SS Hinges,SS tower bolts,locking,sliding arrangement and scaffolding etc and non streaking sealant of Dow corning (789 or 991 HP) and including frame work for AC provision approved shade by Engr-in-Charge and complete all as specified and as directed. Only exposed surface shall be measured and paid for ACP Material shall be for exterior application & of shade as approved by Garrision Engineer. Note:-The work is to be carried and upto 2nd floor height of building and rate quoted by the tenderer are deemed to be included for scaffolding and AL frame work,joinery item incluided in this work) |
| 87 | S&F 12 to 15mm thick heavy duty parking tiles of any colour, any pattern any desing as approved by GE, area of each tile exceeding 0.04 Sqm but not exceeding 0.36 Sqm as in floors/landing/steps/riser/parking/ footpath etc and over & including 15 mm thick screed bed or bedding/ rendering layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles including dismantling of existing tiles of any description complete all as specified and directed. |
| 88 | Cutting holes into or through brick wall bult in cement mortar or cement lime mortar and stone walls n.exc 150 sq.cm including making good to the original surface complete all as specified and as directed. |
| 89 | Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 90 | S & F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed. |
| 91 | S&F Pre-printed galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw/ L-type or J type cranked hook complete all as specified and as directed. |
| 92 | S&F Structural Steel in roof, purlins crane of angle or other section gusset plates, Flat Iron rails braces etc, drilled for fixing, and other covering r etc to be prepared for hanging and sliding with and including either hooks and hinges and other covering running rails and guides and hanging also fastening and fixing complete. Fe- 410 Grade E-250 quality -B-l complete all as specified and as directed. |
| 93 | S & F GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors, 15 mm bore of pipe complete all as specified and as directed. |
| 94 | S&F 15 mm bore CP two way bib cock complete all as specified and as directed. |
| 95 | Surface dressing not exceeding 15 cm deep and getting out in soft / loose soil complete all as specified and as directed. |
| 96 | M&L 25 mm thick factory made rubber moulded glossy finished cement concrete tiles size 300mmx 300mm with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size, laid in required colour & pattern over 20 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 97 | Supply, fabrication & installation of box-type modular kitchen cabinets (below/above counter) up to 600 mm depth (or as per actual size at site) made of 18 mm thick HDHMR pre-laminated waterproof & termite resistant board for top, bottom, back, partitions, drawers, shelf etc. Shutters & exposed surfaces made of 18 mm thick HDHMR laminated with 1 mm thick acrylic high gloss sheet on one side and 0.8 mm balancing laminate on other side, factory pressed. Edges finished with PVC edge banding tape applied by edge bending machine etc including auto closing spring loaded hinges(hydraulic type), magnetic catchers, SS handles stainless, steel soft closing heavy type telescopic drawers channel etc complete all as per approved shop drawing and as directed. Note :- i) Fittings & fixtures shall be deemed to be included in rate quoted by the tenderer.ii) The measurement for payment shall be based on the superficial area of the modular kitchen cabinets. |
| 98 | S & F Modular Cabinet Kitchen accessories of Stainless Steel grade-304, 6mm thick rod including :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all specified and directed. |
| 99 | Dismantling fencing wire mesh any type complete all as specified and as directed. |
| 100 | Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed. |
| 101 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, strainig bolts, etc. including provision of binding wire all as specified. |
| 102 | Supply and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 103 | M & L for Machine pressed pre cast concrete inter locking paver block 80 mm thick M-40 grade with grey cement and pigment & glossy finished any shape colour, size over and including 50 mm thick sand cushioning complete all as specified and directed. |
| 104 | Removing excavated soils exc. 500m and and n. ecx 500 mtr depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed. |
| 105 | M&L two coat of cement based paint on the newly plaster surfaces of wall complete all as specified and as directed. |
| 106 | S&F mild steel Framed work Fe - 290 Gde E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as speified and directed. |
| 107 | M&L for 2 mm thick MS sheet fixed with steel chowkats of doors with welding of hinges comlete all as specified and directed. |
| 108 | S&F 100mm size butt hinges stainless steel of AISI 304 complete all as specified and directed. |
| 109 | S&F 250 mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clipss of sheet, cast or extruded sections and fixing bolts and fixed etc complete all as specified and directed. |
| 110 | S&F stainless steel of AISI 304 grade handle of size 200mm size long etc. complete all as specified and directed. |
| 111 | M & L for complete removal of existing treatment and applying two coats of synthetic enamel paint over a coat of red oxide primer on old steel surfaces of any description over 10 cm in width or grith, not otherwise described including preparation of surfaces complete all as specified and as directed. |
| 112 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primess complete all as specified and as directed. |
| 113 | Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 114 | M&L for 15 mm thick cement mortar plaster on brick or concrete surfaces in CM 1:6 finished even and smooth surface wihtout using extra cement on int wall of up to four stories bldgs complete all as specified and as directed. |
| 115 | M & L for Preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion, over a coat white or tinted over & including a coat of wall care Putty complete all as specified and as directed. |
| 116 | M&L for preparation by complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces and old plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care putty complete all as specified and directed. |
| 117 | S&F in repairs brass CP Wall mixer for mixing Hot and cold water screwed down for iron pipe complete all as specified and as directed. |
| 118 | S&F in repairs vitreous china wash hand basin, white round shape size 520x450x200 mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etccomplete all as specified and as directed. |
| 119 | S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified. |
| 120 | M&L soap dish chromium plated brass fixed with brass nuts and screws as in repair complete all as specified and as directed. |
| 121 | M&L toilet paper holder brass chromium plated as in repair complete all as specified and directed. |
| 122 | S&F in repairs CP brass shower rose fancy type 125mm size suitable for 15mm bore pipe complete all as specified and as directed. |
| 123 | S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed. |
| 124 | M&L for 18 mm thick wood plastic composites (WPC) board for shutters, 100% solid with density not less than 650 Kg per cubic meter , one side wood grain finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels, 75 mm long handles for each shutters, PVC magnetic door catches, etc complete all as specified and directed.Note : (a) Pattern & design of WPC board to be decided by GE.(b) Locking arrangement shall be provided in kitchen cabinet shutters. The rate quoted by the tenderer shall be included for the same. |
| 125 | M&L for 18 mm thick wood plastic composites (WPC) board for partitions, 100% solid with density not less than 650 Kg per cubic meter , both side white finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like side brackets, etc complete all as specified and directed.Note : (a) Pattern & design of WPC board to be decided by GE. |
| 126 | S&F (width of flaps 30 mm) Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed. |
| 127 | Taking down copper/aluminium point wiring (light, fan, socket or pwer) complete including fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets etc making good disturbed surfaces of walls, floors etc. complete all as specified and as directed. |
| 128 | M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including Modular steel terminal boxes 2mm thick factory made including white cover modular plate with frame suitable for modular switches/sockets/fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) complete all as specified and as directed. Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete. |
| 129 | All as per srl item No 128.00 here-in-before but 5 Amp socket outlet on same board. |
| 130 | All as per srl item No 128.00 here-in-before but One socket outlet 5 Amps on independent board. |
| 131 | All as per srl item No 128.00 here-in-before but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete. |
| 132 | M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit complete including 4 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one socket outlet for modular AC Box on Independent board with cables 4.0 sqmm size for phase and neutral and 4 Sqmm for earthing complete all as specified and as directed. Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete. |
| 133 | S&F switch modular type, 1 way 6A, 1 module complete all as specified and as directed. |
| 134 | S&F Modular Socket, 6A - 2/3 pin 2 module complete all as specified and as directed. |
| 135 | S&F switch modular type 1way 16A, 1module with indicator complete all as specified and as directed. |
| 136 | S&F Socket 6A/16A - 2/3 pin combined complete all as specified and as directed. |
| 137 | M&L for sand cushioning with a layer of fine sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and as directed. |
| 138 | supply and laying brick common burnt sub class 'B' old size and for protection of cable laid in trenches for underground cable of compressive strength not less 75kg/Sqcm complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 139 | supply and laying brick common burnt sub class 'B' old size and for protection of cable laid in trenches for underground cable of compressive strength not less 75kg/Sqcm complete all as specified and as directed. Please Enable Macros to View BoQ information |
