|
| 1 | Repair and Rewinding of BS Make 10 HP Submersible Pump sets by caring out of following works:- P/o Rewinding kit for Motor, Motor Bering Bush, Guide Bush, Distance Bush, Thrust Plate , Rotor Sleeve Turning & Grinding , Impeller Repairing, Labour Charges etc. as per required of following pump sets no.MN-408,MN-411.Rewinding Kit of Motor |
| 2 | Motor Bering Bush |
| 3 | Coupling Sleeve |
| 4 | Upper Bush |
| 5 | Guide Bush |
| 6 | Distance Bush |
| 7 | Stage Bowl C.I |
| 8 | Epoxy Paint of Rotor |
| 9 | Rotor Sleeve Turning & Grinding |
| 10 | Impeller Repairing |
| 11 | Labour Charges |
| 12 | Repair and Rewinding of BS Make 7.5 HP Submersible Pump sets by caring out of following works:- P/o Rewinding kit for Motor, Motor Bering Bush, Guide Bush, Distance Bush, Thrust Plate , Rotor Sleeve Turning & Grinding , Impeller Repairing, Labour Charges etc. as per required of following pump sets no.MN-151,MN-175, MN-412, MN-424, MN-425, MN-426, MN-427, MN-444, MN-445, MN-446, MN-448, MN-483, MN-484, MN-485, MN-486, MN-487, MN-488, MN-489, MN-491, MN-492, MN-493, MN-494, MN-495.Rewinding Kit of Motor |
| 13 | Motor Bering Bush |
| 14 | Sand Guard |
| 15 | Coupling Sleeve |
| 16 | Thrust Plate |
| 17 | Upper Bush |
| 18 | Lower Housing |
| 19 | Guide Bush |
| 20 | Distance Bush |
| 21 | Stage Bowl C.I |
| 22 | S.A.T Bearing |
| 23 | Balancing of Rotor |
| 24 | Stamping Repairing |
| 25 | Epoxy Paint of Rotor |
| 26 | Rotor Sleeve Turning & Grinding |
| 27 | Rotor End Welding Key Making |
| 28 | Impeller Repairing |
| 29 | Labour Charges |
| 30 | Repair and Rewinding of BS Make 5 HP Submersible Pump sets by caring out of following works:- P/o Rewinding kit for Motor, Motor Bering Bush, E.P Stage Bowl, Thrust Plate , Rotor Sleeve Turning & Grinding , Labour Charges etc. as per required of following pump sets no.MN-430, MN-431.Rewinding Kit of Motor |
| 31 | Motor. Bering Bush |
| 32 | E.P Stage Bowl |
| 33 | Coupling Sleeve |
| 34 | Upper Bush |
| 35 | E.P Impeller |
| 36 | Stamping Repairing |
| 37 | Rotor Sleeve Turning & Grinding |
| 38 | Labour Charges Please Enable Macros to View BoQ information |
