|
| 1 | Supply of mono block pump set of 5 HP 3 phase, 415 V, 50 Hz, AC supply with following MOC & technical specification: - Discharge- 970 - 1150 LPM, head 12-15 meter, impeller- C.I, Shaft : S.S., Delivery size:- 100mm dia. Make: SU/BS/Skope/ Lubi/DJB approved SOR(E/M)-2022 2.46.3 |
| 2 | Supply of Hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items. 1. MCCB 63 Amp, 4 Pole-1 No 2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No 3. Fully automatic star delta starter of 10HP, 3Phase oil immersed type 1No 4. Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No 5. Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No 6. LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7. Shunt capacitor of 5 KVAR with three phase isolator 1No 8. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No 10. Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make: - All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved. |
| 3 | S/O PVC insulated and PVC Sheathed industrial 3 Core Flat Submersible cable with bare bunched copper conductor for submersible pump motor with voltage grade 1100 volt as per IS : 694/1990. Nominal area of conductor 6 (sq mm), Make: - Gloster, Grandlay, Havells, ICC, ICL, Universal |
| 4 | Providing of Aluminium armoured cable of size 25 sq. mm 3.5 core . Make :-Havells/Gloster/DJB Approved. |
| 5 | Providing and fixing of MS Gap Piece of size 100mm dia thickness 6 mm dia medium class duly welded with both side MS flange of 25mm thickness as pe site requirement. |
| 6 | Providing of 100 mm dia Non return valve CI D/F as per IS 14846 PN1.0 Make:-Kirloskar/IVC/DJB Approved. |
| 7 | Providing of 100mm dia non-rising spindle CI D/F sluice valve as per 14846 PN1.0 Make: -Kirloskar/IVC/DJB Approved. |
| 8 | S/O GI Bend 100 mm dia 90deg. Double flange. Make:- approved by DJB. |
| 9 | Supply of neoprene rubber sheet having 50% neoprene, 3 mm thick Make Jyoti/Worth/DJB approved SOR E&M 2022 item code 22.6.1 |
| 10 | S/o rubber mat for electrical purpose of size 1mX2mX19 thick. Make: -Jyoti/National or any make approved by DJB SOR E/M 2022 item code 22.4.6 |
| 11 | Supply of Nut-bolts and washer off size as per site requirement. |
| 12 | Making of all Electrical connection by using Aluminium armoured cable from LT Panel to motor lead connection & from Panel to mono Block Pump set with required items i.e. thimble, ferrule etc. as per site requirement and direction of engineer-in-charge. |
| 13 | Providing and fixing M.S. Base frame of M.S. plate for mono Block Pump set shall hold on base M.S plate and angle & flat etc as per required at site. |
| 14 | Installation, Testing & Commissioning of Mono pump-set with all E&M Equipments including Valve, NRV, bend and other pumping specials as required at site. Assembling of all Electrical items & wiring to complete the panel, Earthing of all equipments like p/set & panel etc., all piping work, all welding work, fixing of valves and accessories executing minor civil works, making electrical connections with cable as required size i/c watch and ward cartage, taking all safety measures all tool and tackles testing and commissioning of all E&M equipments at No load and full load conditions as per standard from full satisfaction of Engineer-In-Charge. Please Enable Macros to View BoQ information |
