|
| 1 | Supplying fitting and fixing of Triple Vessel 16\\" x65\\" (2000 Lph) Fully autometic R O Water Treatment Plant all respect complete as per direction of E/I (Rate Analysis Attached) (Including 5 Years Operation & Maintenance) |
| 2 | Supplying all materials labours tools and equipment's for layind U-PVC Pipe in wall of supreme life /Water flow pipes with solvent cement on wall floor including supplying and fitting to wall hooks or pipe dam cutting pipe to size where necessary etc. all complete as per spectification and direction of the E/I (C-PVC pipes) (a) 40mm dia U-PVC Sch-80 pipe (In Wall) |
| 3 | (b) 50mm U-PVC Sch-80 pipe (In Wall) |
| 4 | Supplying all materials tools and eqmpment for fitting and fixing special type chrome plated and U-PVC fitting of approved make all complete as per derection o the E/I Elbow 40mm U-PVC |
| 5 | 50mm U-PVC |
| 6 | Tee 40mm U-PVC |
| 7 | 50mm U-PVC |
| 8 | Reducing Tee 50mm/40mm U-PVC |
| 9 | FTA (Metal) 40mm U-PVC |
| 10 | 50mm U-PVC |
| 11 | MTA (Metal) 40mm U-PVC |
| 12 | 50mm U-PVC |
| 13 | Socket Plain 40mm U-PVC |
| 14 | 50mm U-PVC |
| 15 | U-PVC Union 40mm U-PVC |
| 16 | 50mm U-PVC |
| 17 | Supplying and fixing UPVC life long valve of approved quality all complete as per specification and direction of E/I 40mm U-PVC |
| 18 | 50mm U-PVC |
| 19 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 20 | Dismantling plain cement concrete work including stacking servicible materials in countable stacks within 15m lead and disposal of unservicable materials with all leads all complete |
| 21 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 22 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/ |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 24 | Providing 50mm thick 2nd class patent stone flooring (1:2:4) with 20mm, to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I |
| 25 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 26 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I |
| 27 | Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I |
| 28 | Reinforcement cement concrete work in walls (any thickness), including attached pilasters, buttersses, plinth and string cource, filleets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarce sand (zone-III) : 3 Graded stone aggregate 20 mm nominal size |
| 29 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 32 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts |
| 33 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
| 34 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 and including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I |
| 35 | Providing 1.5 mm. cement punning including curing carrage of water withall leads and lifts as per building specification and direction of E/I |
| 36 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I |
| 37 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 38 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 39 | Providing two coat of painting with ready mixed paint of approved shade make over steel surface including cleaning the surface throughly scaffolding and taxes all complete as per building specification and direction of E/I |
| 40 | Providing and laying 6mm. precast white glazed tiles in walls over 12mm. cement mortar (1 :3) and iointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royaity all complete as per building specification and direction and of E/1 |
| 41 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 42 | Providing TMT reinforcement of following dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 43 | Providing TMT reinforcement of following dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 44 | Providing TMT reinforcement of following dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 45 | Add carriage cost of Materials i) Bricks lead 8 km |
| 46 | ii) Sand lead 20 km |
| 47 | iii) Chips lead 20 km |
| 48 | iv) cement lead 20 km |
| 49 | v) Steel lead 20 km |
| 50 | vi) White Cement 20 Km |
| 51 | Providing and fixingHDPE container Syntexoralikeonepiecemoldedwater tankmade.outof lowdensitypolythyler andbuiltcorrugationincludingofdelivery up todestinationhoistingand fixingof accessories such as inlet, outlet overflowof all tankscapacity2000.00 litres Capacity Water storage Tank(DWSD item No-01 M) |
| 52 | Transportation charges |
| 53 | Lifting of 1000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour |
| 54 | Making hole in Tank |
| 55 | Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc. |
| 56 | providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed at both ends) |
| 57 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes ,having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings ,including fixing the pipe with clamps at 1m spacing .this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge . internal work - exposed on walls (a)32 mm dia in wall |
| 58 | (b)32 mm dia under ground |
| 59 | (b)25mm dia in wall |
| 60 | supply and fixing GI fittings of approved shade make all complete as per direction of E/I socket 32mm |
| 61 | socket 25mm |
| 62 | R-socket 32mmx25mm |
| 63 | Elbow 32 mm |
| 64 | Elbow 25mm |
| 65 | Nipple 32mm |
| 66 | Nipple 25mm |
| 67 | Union socket 32mm |
| 68 | Union socket 25mm |
| 69 | TEE 25mm |
| 70 | Providing and fixing Gun metal full way valve of approved quality all complete ,as per specification and direction of E/I 32 mm dia .(wt not less than 700gms) |
| 71 | 25mm dia.( wt. Not less than 500gms ) |
| 72 | Providing and fixing 15mm dia male-ended brass bib cock(wt not less than 350 gms) of approved quality with extra spcket all complete as per specification and direction of E/I |
| 73 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. xtra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B |
| 74 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 75 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 76 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size |
| 77 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 78 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 Cement : 1.5 Coarce sand (zone-III) : 3 Graded stone aggregate 20 mm nominal size) |
| 79 | Providing TMT reinforcement of following dia rods as per approved design and drawing including carriage of M.S. rods of (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 80 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 81 | Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 82 | Add carriage cost of ,materials i) Sand |
| 83 | chips |
| 84 | bricks |
| 85 | cement |
| 86 | steel |
| 87 | Add cost of Brick Bat |
| 88 | add 18 % GST |
| 89 | add 1 % labour cess Please Enable Macros to View BoQ information |
