|
| 1 | Surface Dressing of ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal ]of rubbish , lead up to 50m and lift up to 1.5m all kinds of soil |
| 2 | Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m In width as well as 10sqm on plan including getting out and disposal of excavated earth upto 50m and lift upto 1.5m as directed by Engineer-in-charge 2.1.1 All kinds of soil. |
| 3 | Excavating, supplying and filling 01 local carth (including royalty) by mechanical transport upto a lead of 5K M also including ramming and watering of the earth In layers not exceeding 20cm in trenches, plinth, sides of foundation etc. |
| 4 | Providing & Laying of C.C. in 1:6:12 with c/s and 40 mm G.S.B. in foundation of Floor I/c all labour ,materials and T&P etc. |
| 5 | R.C.C. work in column 1:2:4 with cement coarse sand, 20mm gauge stone grit i/c all comp. |
| 6 | M150 Brick work in 1:6 c/s morter in sub-structure i/c all materials, labour & T&P etc. |
| 7 | 12mm thick internal plaster in 1:3 with c/s morter in wall i/c all materials, labour & T&P etc. |
| 8 | M.S. iron work in plain work such as R.C.C. work i/c all comp. |
| 9 | Providing & Laying steelbars including cutting, binding, placing and complete in all respect. |
| 10 | Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work. |
| 11 | Mild steel or iron work of small size and sections such as . holding down bolts, hold fast. tie rods, grating etc.(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply Of stccl and its wastage including cost of bolts, nuts if required, vvelding. grinding and making holes as required for completion of work. |
| 12 | Providing and fixing precoated galvanised iron sheets (size, shape and pitch of. corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling meter. |
| 13 | Providing and laying rectified Glazed Ceramicfloor tiles of size 300 x 300mm or more ( thickness to be specjfied by the manufacturer), of 1st quality contorming to IS: 15622, of approved make, in colours white, Ivory, Grey, Fume Red Brown. laid on 20 thick cement mortar 1:4 ( 1 Cement: 4 Coarse Sand), jointing with slurry white cement and matching pigments etc, comp. |
| 14 | Providing and laying rectified Glazed Ceramic floor tiles of size 300 x 300 mm or more ( thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make. in all colours, shades, except white. Ivory, Grey. Fume Rcd Brown, laid on 20mm thick cement mortar 1:4 ( 1 Cement: 4 Coarse Sand). jointing with slurry white cement and matching pigments etc, complete. |
| 15 | Distempering(First coat) with Oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cernent primer Of approved brand and manufacture such as Berger. J & N Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including prepairing the surface even with Plaster Plaster of Paris or approved approved synthetic synthetic material and sand papered smooth including cost of all material. |
| 16 | Painting of wood or iron work including sand preparing rubbing and cleaning as required for proper completion of works(two coats) |
| 17 | Painting or Varnishing on iron works In small areas or new wood work with one coat of ready mixed priming paint & one coat of approved supperior quality ready mixed paint of clear synthetic varnish including supply of all materials. labour and t&P etc. required for proper completion of the work paint to be used should confirm to the I.S.I No. 103 |
| 18 | Providing and applying putty of 2rnm thickness over plastered surface to prepare the surface even and smooth complete |
| 19 | Supply and fixing 3Zmm thick flush door all complete fittinq |
| 20 | Supply and fixing aluminium flush door all complete fitting bathroom and Latrin 32mm thick flush door all complete fitting. |
| 21 | Supply and Fixing 32mm thick flush door plywood with handle fitting all complete. |
| 22 | Wiring point for light with 1.5 sq. mm. PVC insulated single core aluminium conductor cable in heavy guage rigid steel conduct pipe on surface, complete with 8 SWG GI earth continuity wire, piano type swltch and cellingrose/angle/ button holder on 3 mm. thick phenolic laminated backlite-sheet etc. complete in all respect |
| 23 | Wiringpoint for fan 'fresh air fan (lightduty exhaust fan) with 1.5 sq. mm PVC insulated single core aluminium conductor cable In heavy guage rigidsteel conduit pipe on surface, complete with 8 SWG GI earth continuity wire, piano type switch & ceilingrose on 3 mm. thick phenolic laminated backelite sheet etc. completed in all, as directed |
| 24 | Wiring Point for plug with 1.5 sq. mm. PVC insulated single core aluminiumconductor cable in heavy guage rigidsteel conduit pipe on surface. complete with 8 SWG Gl carth continuity wire and piano type switch and socket etc. comp. in all respect. |
| 25 | S/F of 18W hewells make all fitting complete MR |
| 26 | S/F of LED 12W hewells make all fitting comp. MR |
| 27 | Septic tank of appropriate capacity for 2years cleaning interval for 50 users |
| 28 | S/F of low density polythene seemless one piece mpulded tank and placing the same in proper position including all |
| 29 | Providing and fixing GI/PVC pipe all fitting |
| 30 | Providing and fixing sanitary pipe all fitting |
| 31 | P/F WC pan median type with cast iron P and S trap all complete with automatic flushing |
| 32 | S/F and 25mm PVC pipe in position all comp. |
| 33 | S/F 25mm PVC pipe in position all comp. |
| 34 | S/F 30mm dia socket |
| 35 | 200mm dia drilling and 350mm dia running from ground level to 50m below ground level in alluvial soil upto sand strata |
| 36 | Supply and lowering of 150mm dia PVC plain casing pipe |
| 37 | S/F of 150mm dia End Cap |
| 38 | S/F of 150mm dia Top Cap |
| 39 | S/F of 150mm dia Certerlizer |
| 40 | P/F 550×400mm hand wash basin of white glazed earthen ware ISI marked i/c supply of all materials labour and t&p comp. |
| 41 | P/F flat back 465mm×355mm×265mm size liped from urinal basin of white glazed earther were first quality (Hindustan Nycer Make) S.I. mark S.I.N. 304 and sign board installation |
| 42 | P/F polyvinyl chloride (CPVC) pipe 20mm dia |
| 43 | P/F polyvinyl chloride (CPVC) pipe 15mm dia |
| 44 | P/F bib brass bib cock 400gms i/c all |
| 45 | Making water connection of GI Pipe line with GI main as in SI 210 |
| 46 | PVC low level cisterns 10ltr capacity with all internal fittins of PVC etc. |
| 47 | Handpump with submersible Please Enable Macros to View BoQ information |
