|
| 1 | M&L for overhauling of motor unit, 3 phase, 415 volts by taking down, dismantling and opening completely, cleaning internal parts thoroughly, replacing minor parts such as nut bolts, washers, terminal plate, cable lugs and greasing including insulating materials, varnishing, heating, reassembling reinstalling and testing complete all as specified and directed for the following capacity of motor:-Note:- Unit rate quoted shall be deemed to include for minor unserviceable parts as mentioned/ required for repairs. All other major spares as specified hereinafter shall be measured and paid separately |
| 2 | Centrifugal pump set of 30 HP capacity. |
| 3 | Centrifugal pump set of 15 HP capacity. |
| 4 | Centrifugal pump set of 10 HP capacity. |
| 5 | Centrifugal pump set of 7.5 HP capacity. |
| 6 | Centrifugal/Monoblock pump set of 5 HP capacity. |
| 7 | Centrifugal/Monoblock pump set of 3 HP capacity. |
| 8 | Centrifugal/Monoblock pump set of below 3 HP capacity. |
| 9 | Submersible pump set of upto 10 HP capacity |
| 10 | Submersible pump set of 15 HP capacity |
| 11 | M&L for rewinding electric motor by taking down, disconnecting cable connection, dismantling complete motor, removing burnt copper wire & rewinding with super enamel copper wire including E class insulating material, varnishing, heating etc, re-assembling, installing back on original position and testing for smooth functioning etc complete all as directed for the following capacity:-Note :- Unit rate quoted shall be deemed to be included S&F of minor parts as required. All other major spares as specified hereinafter will be measured and paid separately. |
| 12 | Centrifugal pump set of 30 HP capacity. |
| 13 | Centrifugal pump set of 15 HP capacity. |
| 14 | Centrifugal pump set of 10 HP capacity. |
| 15 | Centrifugal pump set of 7.5 HP capacity. |
| 16 | Centrifugal/Monoblock pump set of 5 HP capacity. |
| 17 | Centrifugal/Monoblock pump set of 3 HP capacity. |
| 18 | Centrifugal/Monoblock pump set of below 3 HP capacity. |
| 19 | Submersible pump set of upto 10 HP capacity |
| 20 | Submersible pump set of 15 HP capacity |
| 21 | S&F in replacement brass impeller set suitable for following capacity centrifugal pump set complete all as specified and directed:- |
| 22 | Centrifugal pump set of 30 HP capacity. |
| 23 | Centrifugal pump set of 15 HP capacity. |
| 24 | Centrifugal pump set of 10 HP capacity. |
| 25 | Centrifugal pump set of 7.5 HP capacity. |
| 26 | Centrifugal/Monoblock pump set of 5 HP capacity. |
| 27 | Centrifugal/Monoblock pump set of 3 HP capacity. |
| 28 | Centrifugal/Monoblock pump set of below 3 HP capacity. |
| 29 | Submersible pump set of upto 10 HP capacity |
| 30 | Submersible pump set of 15 HP capacity |
| 31 | S&F in replacement pump shaft suitable for centrifugal/ monobloc pump set for following capacity of motors complete all as specified and directed:- |
| 32 | Centrifugal pump set of 15 HP capacity. |
| 33 | Centrifugal pump set of 10 HP capacity. |
| 34 | Centrifugal pump set of 7.5 HP capacity. |
| 35 | Centrifugal/Monoblock pump set of 5 HP capacity. |
| 36 | Centrifugal/Monoblock pump set of 3 HP capacity. |
| 37 | Centrifugal/Monoblock pump set of below 3 HP capacity. |
| 38 | Submersible pump set of upto 10 HP capacity |
| 39 | Submersible pump set of 15 HP capacity |
| 40 | S&F in replacement bearing for main shaft drive suitable for pump set of following capacity complete all as specified and directed:- |
| 41 | Centrifugal pump set of 30 HP capacity. |
| 42 | Centrifugal pump set of 15 HP capacity. |
| 43 | Centrifugal pump set of 10 HP capacity. |
| 44 | Centrifugal pump set of 7.5 HP capacity. |
| 45 | Centrifugal/Monoblock pump set of 5 HP capacity. |
| 46 | Centrifugal/Monoblock pump set of 3 HP capacity. |
| 47 | Centrifugal/Monoblock pump set of below 3 HP capacity. |
| 48 | Submersible pump set of upto 10 HP capacity |
| 49 | Submersible pump set of 15 HP capacity |
| 50 | S&F in replacement bush for main shaft drive suitable for pump set of following capacity complete all as specified and directed:- |
| 51 | Centrifugal pump set of 15 HP capacity. |
| 52 | Centrifugal pump set of 10 HP capacity. |
| 53 | Centrifugal pump set of 7.5 HP capacity. |
| 54 | Centrifugal/Monoblock pump set of 5 HP capacity. |
| 55 | Centrifugal/Monoblock pump set of 3 HP capacity. |
| 56 | Centrifugal/Monoblock pump set of below 3 HP capacity. |
| 57 | Submersible pump set of upto 10 HP capacity |
| 58 | Submersible pump set of 15 HP capacity |
| 59 | S&F in replacement CI gland cap with gland rope including nut bolts, washers suitable for centifugal / mono block pump set to match with the existing for following capacity complete all as specified and directed:- |
| 60 | Centrifugal pump set of 30 HP capacity. |
| 61 | Centrifugal pump set of 15 HP capacity. |
| 62 | Centrifugal pump set of 10 HP capacity. |
| 63 | Centrifugal pump set of 7.5 HP capacity. |
| 64 | Centrifugal/Monoblock pump set of 5 HP capacity. |
| 65 | Centrifugal/Monoblock pump set of 3 HP capacity. |
| 66 | Centrifugal/Monoblock pump set of below 3 HP capacity. |
| 67 | Submersible pump set of upto 10 HP capacity |
| 68 | Submersible pump set of 15 HP capacity |
| 69 | Supply and replacement of motor terminal cover complete, suitable and matching with the make, model and rating of the existing motor, complete with necessary gaskets/seals, fasteners, cable entry provisions including removal and disposal of the existing damaged cover, making good all finishes, complete as per site requirements complete all as specified and as directed. |
| 70 | Supply, laying, dressing and proper alignment of existing near LT Panel, including re-routing, arranging and clamping of cables in neat and orderly manner, providing suitable heavy duty PVC/HDPE cable ties, aluminium/GI cable cleats of appropriate size, cable tray or MS angle support frame (if required), saddles, clamps, including drilling of wall/floor and fixing with suitable anchor fasteners, ensuring proper bending radius, segregation of power and control cables, tightening of all terminations, testing for continuity and insulation resistance after completion, making good disturbed surfaces complete all as specified and as directed. |
| 71 | S&F in repair Fully Automatic Star Delta starter (FASD) including timer, over load relay, single phase preventor, including wiring etc complete of followong capacity all as specified and as directed :- |
| 72 | FASD Starter Suitable upto 10 HP Pump |
| 73 | FASD Starter Suitable for 15 HP Pump |
| 74 | FASD Starter Suitable for 30 HP Pump |
| 75 | S&F in repair Single Phase Submersible starter which supports upto 3 HP pump with voltmeter and start stop push buttons complete all as specified and as directed. |
| 76 | S&F in repairs Power contactor suitable for star delta/ DOL starter including necessary connections with PVC insulated cable for the following capacity all as specified and directed :- |
| 77 | Power Contactor Suitable upto 10 HP Pump |
| 78 | Power Contactor Suitable for 15 HP Pump |
| 79 | S&F Over load relay assembly suitable for star delta starter, including rewiring with copper insulated cable for the following capacity including removing the unserviceable over load relay assembly all as specified and directed :- |
| 80 | Overload Relay Suitable upto 10 HP Pump |
| 81 | Overload Relay Suitable upto 15 HP Pump |
| 82 | S&F in repairs Electronic star delta timer 160-500 V rating for 3-30 sec complete all as specified and as directed. |
| 83 | S&F in repairs MCCB 3 Pole .415 V. fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and as directed. |
| 84 | S&F in repairs MCCB 4 Pole .415 V. fixed type, 63 Amps with breaking capacity 16 KA complete all as specified and as directed. |
| 85 | Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm 4 core complete all as specified and directed |
| 86 | Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 25 Sqmm, 4 core complete all as specified and directed |
| 87 | Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 70 Sqmm, 3.5 core complete all as specified and directed. |
| 88 | S&F 3 core multistranded copper Power cable 6 sqmm for Centrifugal pump sets including necessary connection and testing complete all as specified and as directed. |
| 89 | S&F 3 core multistranded copper Power cable 10 sqmm for Centrifugal pump sets including necessary connection and testing complete all as specified and as directed. |
| 90 | Supply, installation, testing and commissioning of glycerine-filled dial type pressure gauge suitable for water service, range 0–10 kg/cm² (0–10 bar), minimum 100 mm dial size, SS case, brass wetted parts with ½” BSP(M) bottom entry, complete with siphon (pigtail), isolating ball valve, nipples, unions and mounting bracket, including cutting/drilling hole in the existing delivery pipe, welding/fixing suitable GI socket/tee, connecting suitable GI pipe up to the pressure gauge and making all leak-proof connections complete all as specified and as directed. |
| 91 | M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge of earth plate at a depth not less than 1.5 M below normal ground level connected to and including GI strip 32x6mm as earth lead by means of bolts and nuts, check nuts and washers etc made of GI & connected to equipment and earthing test point , earth dolly all as shown in elect plate No 3 of SSR Pt-I including all necessary earth work, excavation PCC chamber cover with handle (PCC 1:2:4) and 20mm dia GI watering pipe and 40 mm dia light grade GI for protection of earth strip, wire mesh, funnel, charcoal dust & common salt complete all as specified and directed |
| 92 | S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm bore dia iron pipe and fixed (minimum wt 455 gms/each) complete all as specified and directed. |
| 93 | Cleaning and removing all scale, sludge, silt, algae, grease, dirt and other foreign matter from inside the tank, including mouths of inlet, outlet, overflow and circulating pipes, scrubbing the internal surfaces with suitable brushes, washing thoroughly with clean water, disposing of debris and leaving the tank clean and ready for use of PVC tank of capacity exc 500 litres but not exc 1000 litres complete all as specified and as directed. |
| 94 | M&L for preparing, washing, rubbing down and stopping of distempered surface and complete removal of existing treatment and painted surfaces. Applying two coats of oil bound distemper using sponge roller, including one coat of primer on pilasters, cornices, etc., as sp complete all as specified and directed. |
| 95 | M&L for preparing, washing, rubbing down and complete removal of existing treatment for applying two coats of acrylic emulsion paint (alkali & fungal resistance, dirt resistance, Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on old decorated surfaces of walls, including necessary filling of voids with wall care putty, complete as specified and directed. |
| 96 | S&F in replacement of existing unsv Footvalve ball type(flanged) threaded NRV type with strainer of size 150 mm dia complete all as specified and as directed. |
| 97 | S&F in replacement of existing unsv Footvalve ball type(flanged) threaded NRV type with strainer of size 100 mm dia complete all as specified and as directed. |
| 98 | S&F in replacement of existing unsv Footvalve ball type(flanged) threaded NRV type with strainer of size 80 mm dia complete all as specified and as directed. |
| 99 | S&F in repair sluice valve class PN-I heavy duty with flanged ends having high stainless steel spindle , cast iron wheel duly marked with shut down and open direction confirming to IS-14846-2000 and fixing up by providing rubber insertion sheet,nut, bolt, washer etc complete of following sizes:- |
| 100 | 80 mm dia CI sluice valves. |
| 101 | 100 mm dia CI sluice valves. |
| 102 | S&F in repairs Cast iron Non return butterfly valves of size 100mm dia, PN 1.6 ,SS 304 disc complete all as specified and as directed. |
| 103 | S&F in repairs Cast iron Non return butterfly valves of size 80mm dia, PN 1.6 ,SS 304 disc complete all as specified and as directed. |
| 104 | S&F in repairs Galvanised Iron tubing, medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs, unions, etc., for the following size of pipes, including laying, fixing, aligning fixed complete to walls and ceilings and jointing the GI pipeline on the suction side from UG sump to Pump complete all as specified and as ditected:- |
| 105 | 15 mm dia bore. |
| 106 | 80 mm dia bore. |
| 107 | 100 mm dia bore. |
| 108 | M& L for providing cement concrete PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as coping around wall etc complete including necessary formwork and finishing the exposed surfaces even and smooth without using extra cement complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 109 | M& L for providing cement concrete PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as coping around wall etc complete including necessary formwork and finishing the exposed surfaces even and smooth without using extra cement complete all as specified and as directed. Please Enable Macros to View BoQ information |
