Tender For Development Of Parks In Zone Iv Ab Kota., Kota-Rajasthan

TDR : 54761225

Tender Notice
BOQ

2 Days Left

Kota , Rajasthan

Tender Brief : Tender For Development Of Parks In Zone Iv Ab Kota.

Document Fees
₹ 3500 /-

EMD
₹ 127200.0 /-

Tender Value
₹ 63.60 Lakhs /-

Submission Date
23-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Clearing and Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201.
2	By Mechanical Means
3	In area of non-thorny jungle
4	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
5	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
6	M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
7	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:
8	Cement Mortar 1:6 ( 1-Cement : 6-Sand).
9	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick
10	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
11	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
12	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)
13	Hot rolled deformed bars (IS : 1139).
14	Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .
15	50mm thick.
16	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)
17	Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
18	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
19	Two or more coats on new work
20	Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:
21	New work (Two or more coats applied @ 3.84 kg/10 sqm).
22	Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc.
23	Good soil of earth
24	Spreading of manure , good earth in required thickness (cost of manure and good earth to be separately )
25	Supply & fixing of M-20 grade precast cement concrete Kerb or Dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing earth work, pointing & jointing with cement mortar 1:4 of size
26	(20 x 25) x 30 cm 2
27	Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 50 mm as per drawings and as per IS 15658:2006.and all materials shall conform to MoRTH Specification Clause 602.with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks
28	Category 'B' : Dentated only two side like I,Z,T shape as per IRC:SP:63-2004
29	Double Swing : Double Swing is suitable for 4 to 14 years Children and frame is made of NB pipes which should be following specifications :Area : 3.0 mtr x 2.50mtr.Safe play area : 4.0 mtr x 3.50 mtr.Height : 2.40 mtr. (on ground level)Leg support : 40mm NB pipes Top bar : 50mm NB pipe Seat : 9mm thick reinforced rubber (Non skid chequired top, bearing : Housing special casting heavy duty bail bearing, suspension : 7mm dia Electro Galvanized chain
30	Single See Saw : The Single See Saw suitable for 4 to 8 years children and made of MS pipes which should be following specification : Area Required : 1.50 mtr.x 3.0 mtr.Height : 0.90 mtr. Main Pipe : 50 NB pipePlank : 40 NB pipeHandle : 20 NB pipe Seats : MsS sheet (5mm thick) FRP
31	Parallel bars : Parallel Bars is suitable for 10 to 16 years children and main verticle frame made of 50mm NB pipe and horizontal bars made of 32mm NB pipes. Horizontal bars having length 2.10 mtr. and height is 1.20 mtr. On ground level. Total area of this parallel is 2.0 mtr. x 1.0 mtr.
32	Up and Down Ladder : Providing and Fixing of up-down ladder made out of MS pipe 40mm, 25mm size of length 10xheight should be less than 6' pipe should be ISI marked of heavy weight.
33	Wave Slide : The sliding chute of wave slide is made of 6mm thick fibre glass reinforced plastic. (Binani or equivalent make) with a smooth surface consist of 3 sliding mould of 2.00 ft. (approx). The platform made out of 10 gauge MS sheet and shall be supported on 33mm OD 14 gauge. The ladder shall be 60cm wide (approx) and will be made of 25mm NP pipe with 15mm dual steps. The slide shall be supported on three parallel supports of different length. the size of the slide above the ground level shall be as follows platform height 2.40, slide length 4.20m and slide width 0.50 mtr. (approx)
34	Supply and fixing of ornamental garden bench in height 2'7\\" and length 5' main frame are made of CI legs size 2'7\\"x2\\"x1'5\\" complete with MS rectangular pipe 5'x21/2\\"x1 '.
35	S/F of following outdoor Gym (fitness) Equipment including excavation of foundation in all kind of soil/hard roack. construction of foundation as per requirement of Gym Equipment or atleast 0.40x0.40x0.60m size in RCC M-20 mix or as per direction of engineer in charge. Gym equipment should be as per enclosed drawing and design in special conditions folowing make Kilkari/Regal/Arihant/Arogyam.
36	Double Bar:Features : -H-4'6\\", L-6'6\\", W-3'-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. PipePowder Coated 100-110 microns
37	Sit Up Board:Features : -H-3'9\\", L-4'6\\", W-2'1\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. PipePowder Coated 100-110 microns
38	Double Surf Board:Features : -H-4'4\\", L-3'10\\", W-3'2\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe-Powder Coated 100-110 microns- FRP Foot Rest
39	Sky Walker:Features : -H-4'8\\", L-5'1\\", W-1'8\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
40	Cross Trainer:Features : -H-5'3\\", L-4'5\\", W-1'11\\"-3 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
41	Shoulder Builder Triple:Features : -H-6'3\\", L-4'8\\", W-3'6\\"-3 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns
42	Double Twister Seating :Features : -H-4'4\\", L-7'1\\", W-2'2\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns
43	Ches Press Double:Features : -H-6'8\\", L-5'5\\", W-2'3\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
44	Rower Double:Features : -H-3'8\\", L-7'6\\", W-2'7\\"- 2x2 Inch Square CRCA Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
45	Peck Deck Double:Features : -H-6'2\\", L-6'1\\", W-3,2\\"-3 Inch Dia, Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
46	Leg Press Double:Features : -H-5'8\\", L-6'4\\", W-1'7\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Rajasthan Tenders

Services Tenders

Space Planning and Designing Tenders

Gardening Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Development Of Parks In Zone Iv Ab Kota., Kota-Rajasthan

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Clearing and Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201.
2	By Mechanical Means
3	In area of non-thorny jungle
4	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
5	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
6	M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
7	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:
8	Cement Mortar 1:6 ( 1-Cement : 6-Sand).
9	Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick
10	Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
11	Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.
12	Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)
13	Hot rolled deformed bars (IS : 1139).
14	Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .
15	50mm thick.
16	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)
17	Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
18	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
19	Two or more coats on new work
20	Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:
21	New work (Two or more coats applied @ 3.84 kg/10 sqm).
22	Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc.
23	Good soil of earth
24	Spreading of manure , good earth in required thickness (cost of manure and good earth to be separately )
25	Supply & fixing of M-20 grade precast cement concrete Kerb or Dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing earth work, pointing & jointing with cement mortar 1:4 of size
26	(20 x 25) x 30 cm 2
27	Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 50 mm as per drawings and as per IS 15658:2006.and all materials shall conform to MoRTH Specification Clause 602.with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks
28	Category 'B' : Dentated only two side like I,Z,T shape as per IRC:SP:63-2004
29	Double Swing : Double Swing is suitable for 4 to 14 years Children and frame is made of NB pipes which should be following specifications :Area : 3.0 mtr x 2.50mtr.Safe play area : 4.0 mtr x 3.50 mtr.Height : 2.40 mtr. (on ground level)Leg support : 40mm NB pipes Top bar : 50mm NB pipe Seat : 9mm thick reinforced rubber (Non skid chequired top, bearing : Housing special casting heavy duty bail bearing, suspension : 7mm dia Electro Galvanized chain
30	Single See Saw : The Single See Saw suitable for 4 to 8 years children and made of MS pipes which should be following specification : Area Required : 1.50 mtr.x 3.0 mtr.Height : 0.90 mtr. Main Pipe : 50 NB pipePlank : 40 NB pipeHandle : 20 NB pipe Seats : MsS sheet (5mm thick) FRP
31	Parallel bars : Parallel Bars is suitable for 10 to 16 years children and main verticle frame made of 50mm NB pipe and horizontal bars made of 32mm NB pipes. Horizontal bars having length 2.10 mtr. and height is 1.20 mtr. On ground level. Total area of this parallel is 2.0 mtr. x 1.0 mtr.
32	Up and Down Ladder : Providing and Fixing of up-down ladder made out of MS pipe 40mm, 25mm size of length 10xheight should be less than 6' pipe should be ISI marked of heavy weight.
33	Wave Slide : The sliding chute of wave slide is made of 6mm thick fibre glass reinforced plastic. (Binani or equivalent make) with a smooth surface consist of 3 sliding mould of 2.00 ft. (approx). The platform made out of 10 gauge MS sheet and shall be supported on 33mm OD 14 gauge. The ladder shall be 60cm wide (approx) and will be made of 25mm NP pipe with 15mm dual steps. The slide shall be supported on three parallel supports of different length. the size of the slide above the ground level shall be as follows platform height 2.40, slide length 4.20m and slide width 0.50 mtr. (approx)
34	Supply and fixing of ornamental garden bench in height 2'7\\" and length 5' main frame are made of CI legs size 2'7\\"x2\\"x1'5\\" complete with MS rectangular pipe 5'x21/2\\"x1 '.
35	S/F of following outdoor Gym (fitness) Equipment including excavation of foundation in all kind of soil/hard roack. construction of foundation as per requirement of Gym Equipment or atleast 0.40x0.40x0.60m size in RCC M-20 mix or as per direction of engineer in charge. Gym equipment should be as per enclosed drawing and design in special conditions folowing make Kilkari/Regal/Arihant/Arogyam.
36	Double Bar:Features : -H-4'6\\", L-6'6\\", W-3'-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. PipePowder Coated 100-110 microns
37	Sit Up Board:Features : -H-3'9\\", L-4'6\\", W-2'1\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. PipePowder Coated 100-110 microns
38	Double Surf Board:Features : -H-4'4\\", L-3'10\\", W-3'2\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe-Powder Coated 100-110 microns- FRP Foot Rest
39	Sky Walker:Features : -H-4'8\\", L-5'1\\", W-1'8\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
40	Cross Trainer:Features : -H-5'3\\", L-4'5\\", W-1'11\\"-3 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
41	Shoulder Builder Triple:Features : -H-6'3\\", L-4'8\\", W-3'6\\"-3 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns
42	Double Twister Seating :Features : -H-4'4\\", L-7'1\\", W-2'2\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns
43	Ches Press Double:Features : -H-6'8\\", L-5'5\\", W-2'3\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
44	Rower Double:Features : -H-3'8\\", L-7'6\\", W-2'7\\"- 2x2 Inch Square CRCA Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
45	Peck Deck Double:Features : -H-6'2\\", L-6'1\\", W-3,2\\"-3 Inch Dia, Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest
46	Leg Press Double:Features : -H-5'8\\", L-6'4\\", W-1'7\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest Please Enable Macros to View BoQ information

Tender For Development Of Parks In Zone Iv Ab Kota., Kota-Rajasthan

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us