|
| 1 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.(a)40 Amp. |
| 2 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 3 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I Wire in 15 mm dia G.I pipe from earth electrode including connection with G.I thmble excavation and re-filing as required. |
| 4 | Providing and fixing 6 SWG dia G.I. wire on surface or in recessfor loop earthing as required. |
| 5 | Supply lowering and fixing following size of G.I Pipe (M-Class) i/c cutting threading on both side etc. ISI marked etc as reqd. 32 mm (Nominal Bore). |
| 6 | Supplying and fixing following size of G.I. Socket as reqd. 32 mm dia |
| 7 | Supplying and fixing following size of G.I. Union as reqd. 32 mm dia |
| 8 | Supplying and fixing following sizes of GI Elbow as required 32 mm dia. |
| 9 | Supply, installation, testing and commissioning of cubical type control panel board for Single phase & Three phase submersible pumping set of following rating complete with contactor, relay, MCB, condenser, voltmeter, ammeter, and indication lamp etc including connections etc. as reqd.(a) 1.5 HP (Single Phase) |
| 10 | Providing and Fixing following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable conforming to IS.694/1990 etc. as reqd.(a) 3x2.5 sq.mm |
| 11 | Supply and fixing following sizes of insulated steel flexible safety rope for holding submersible pump set including clips etc complete as reqd.(a) 6mm |
| 12 | Lifting the existing submersible pump set with its all accessories from well and Lowering the same along with all accessories for the depth upto 50 meter complete as reqd. |
| 13 | Rewinding of single / three phase A.C.motors of vertical type multi stage submersible pump set of following ratings:-(a) Single phase 1/1.5 HP |
| 14 | Repairing of the Pumping unit of 1/1.5/3 HP vertical type , multistage , submersible pump set by replacement of following accessories /parts etc. complete as reqd. (a) Gun Metal Bush / Bearing. |
| 15 | (b) Pump Shaft. |
| 16 | (c) Impeller |
| 17 | SITC of Hot press moulded SMC panel/canopy Box of size (OD) 900 mm x 450 mm x260 mm & , (ID) 900mmX450mmX250 mm , anti -corrosive , dust proof , shock proof , self extinguising property, resistant to heat , vermin proof, Ultra Voilet stablized , pilfer resistant , suitable for mounting 1 no 3 phase starter , 1 no 63 A 4 pole isolator and 1 no 3 phase energy meter, socket for outgoing connection with pilfearge proof SMC door duly welded with S/S handle having danger logo on its outer surface and with 1 no Hot Dip galvanised iron stand for base of size 40 mmX40mmX5mm and height of the stand is 600 mm including 300 mm height below the ground with side strip of size 25x5 mm. |
| 18 | Development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. The development shall be considered complete when Gravel stop sinking, Discharge ceased to improve and the sand contents are not more than 10 PPM after 20 minutes of starting the pump complete as reqd. |
| 19 | Supply and Fabrication of pole protection system made up of 8 SWG steel wire mesh of size 25mm x75mm rectangular with 50mm x 50mm x 6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc. as rqd. |
| 20 | Supply , lowering , testing and commissioning of vertical type, multistage , totally enclosed water filled deep well submersible pumping set complete i/c connection etc as reqd. Single phase 1.5 HP having discharge of 72 LPM Approx at 49 M Head. |
| 21 | Supply of XLPE insulated PVC sheathed Al. conductor armoured cable 1.1 KV grade confirming to IS-7098 of following size:2C*6 sqmm. |
| 22 | S & F MS Clamp made up ofm iron flat of size 50X6 mm with 4 nut bolt for holding the GI pipe as reqd. 32mm |
| 23 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm |
| 24 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/Hume metal pipe as required.Upto 35 sq. mm |
| 25 | Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. |
| 26 | PART-B Comprehensive AMC (Annual Maintenance Contract) for repair and maintenance of Tube Wells installed at various Municipal Works for depth of 50 metres to 100 metres for cost of one Tubewells with submersible p/set etc of upto 1/1.5. HP. Please Enable Macros to View BoQ information |
