Tender For Water Body (Bowari) Rejuvenation Project For Existing Source At Gadana In Tehsil Bhattiyat Distt. Chamba (H.P) (Sh:-C/O Plain Cement Concrete R/ Wall At Rd 0 To 7.00 =7.00 Rmt. Of Ht. =4.75 Mtrs.), Chamba-Himachal Pradesh
TDR : 54760681
Tender Notice
BOQ
6 Days Left
Chamba
Himachal Pradesh
Tender For Water Body (Bowari) Rejuvenation Project For Existing Source At Gadana In Tehsil Bhattiyat Distt. Chamba (H.P) (Sh:-C/O Plain Cement Concrete R/ Wall At Rd 0 To 7.00 =7.00 Rmt. Of Ht. =4.75 Mtrs.)
Name of Work:- Water Body (Bowari) Rejuvenation project for existing source at Gadana in Tehsil Bhattiyat Distt. Chamba (H.P) (SH:-C/o PCC R/ Wall at RD 0 to 7.00 =7.00 Rmt. of Ht. =4.75 Mtrs.)
Sl. No.
Item Description
1
Excavation in earth work and disposal of all excavated earth such as pick work, jumper work, blasting work in hard/ soft rocks, including dewatering in saturated soil upto all leads and lifts disposed earth to be levelled and neately dressed within all leads and lifts as per the direction of Engineer-in -Charge.
2
Providing form work with steel plates 3.15 millimeter thick welding with angle iron in frame 30x30x5 millimeter, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ-reinforced concrete and plain concrete work in:-
3
Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge.
4
Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) with 15 % plums and curing complete excluding cost of form work in Retaining wall/ Breast walls. The size of plum shall usually be 150 mm to 300 mm as per PWD specification within all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.
5
Providing and fixing PVC pipe for weep holes 100 mm dia of reputed make as per relevant specification of pressure 4.50 Kg./Cm2 complete within all and lift as per the direction and to the entire satisfaction of Engineer in charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
