|
| 1 | Earth work in excavation in all kind of classification of soil in foundation of structures upto all depth/ height as per drawing and technical specification Clause 305.1 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material and disposal of all surplus excavated earth in specified site and as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level 1:5:10 (One Cement : five coarse sand) : ten graded stone aggregate 40 mm ( Forty millimetre) nominal size :including all leads and lifts and as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 100mm ( One hundred ) dia PVC pipe extending through the full width of the structure with slope of 1 vertical : 20 horizontal towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 in all leads and lifts and carriage of material by all modes of transportation as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Back filling behind retaining walls, breast walls, abutments, wing walls and return walls complete as per drawing and technical specifications clause 1204.3.8 in all leads and lifts and carriage of materials by all modes of transportation and as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 50 metres lead as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Providing and fixing 35mm thick (Thirty Five millimetre) thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows fixing with butt hinges of required size with with necessary screws excluding panelling which will be paid for seperatelly all complete as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Providing and fixing 300x10mm (Three hundred into ten millimetres)aluminium tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 9 | Providing and fixing 300×16mm (Three hundred into sixteen millimetre) anodized aluminium sliding door bolts anodized / powder coated colour or shade with bolts and nuts screws etcetera complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals: |
| 10 | Providing and fixing aluminium handles anodized/ powder coated transparent or dyed to required colour and shade with necessary screws etcetere complete. upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. |
| 11 | Repairs to plaster With cement mortar 1:4 of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Providing and laying 500 x 500 mm Vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | 8 mm thick Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc including all leads and lifts and as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D (Five hundred) or more as per drawing and HP,PWD technical specification The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 17 | Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. including entire carriage of materials within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 18 | Providing and fixing 20 mm dia nominal bore dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. including entire carriage of materials within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 19 | Providing and fixing Single socketed pipes on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 20 | 75 mm (Seventy Five millimeters) diameter |
| 21 | 110 mm (One hundred millimeters) diameter |
| 22 | Providing and fixing Coupler on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 23 | Coupler 75 mm (Seventy Five millimeters) dia |
| 24 | Coupler 110 mm (One hundred millimeters)ldia |
| 25 | Providing and fixing 110 mm dia (one hundred ten milimeters) PVC door bend with oval access door made of Finolex insertion rubber washer 3 (three) millimetres thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 26 | 75 mm (Seventy Five millimeters) dia. |
| 27 | 110 mm (one hundred ten) millimetres dia. |
| 28 | Providing and fixing PVC single equal branch plain ISI marked imade of Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast make including fixing with approved adhesive etcetera complete upto all floor level complete |
| 29 | 75mm (Seventy five millimetres) nominal dia |
| 30 | 110mm (One hundred ten millimetres) nominal dia |
| 31 | Providing and fixing PVC cowl made of finolex 110 mm ( One hundred ten millimetres) nominal size within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 32 | 75mm (Seventy five millimetres) nominal dia |
| 33 | 110mm (One hundred ten millimetres) nominal dia |
| 34 | Providing and fixing 15 mm nominal bore uplasticised PVC connection pipewith brass unions of 30 cm length within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 35 | Providing and fixing 450mmx350mm (Four hundred into three hundred fifty millimetres) bevelled edge mirror ( Exotica make ) of superior glass mounted on 6mm (Six millimetres) thick Asbestos cement sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers complete within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 36 | Providing and fixing 600mm x120mmx5mm (Six hundred into one hundred twenty millimetres into five milimeters) glass shelf Jaquar (ACN-1111NM ) or its equivalent in Hindware/Cera make approved by Engineer-in-Charge with CP brass bracket and guard rail complete fixed to wooden plugs with CP brass screws etc. complete specifications within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 37 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 38 | Providing and fixing PTMT soap Dish Holder having length of 138mm (one hundred thirty eight millimeters) breadth 102mm (one hundred two millimeters) height of 75mm(seventy five millimeters) within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 39 | Providing and fixing 15mm (fifteen millimeters) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. |
| 40 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 41 | 15mm (fifteen millimeters) nominal bore |
| 42 | 20mm (Twenty millimeters) nominal bore |
| 43 | Providing and fixing 8 mm (Eight millimeters) dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 44 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (Twenty five to Forty millimeters) nominal bore within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 45 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. And and as per drawings and technical specifications and the direction of Engineer-in-Charge |
| 46 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 47 | Providing and fixing CP Brass shower rose with 15mm to 20mm (fifteen to twenty millimetres inlet of Jaquar JAL, ESS ESS. Kingston,Gem,Parko,Techno,Seiko within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 48 | Providing and fixing 100 mm (Hundred millimeters) sand cast Iron grating for gully trap. including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. |
| 49 | Providing and fixing 32 mm (thirty two millimeters) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including entire carriage of material within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 50 | Providing and fixing kitchen sink of size 600x450x 250 mm ( six hundred into four hundred fifty into two hundred fifty) with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required White glazed fire clay kitchen sink and as per drawings and technical specifications and the direction of Engineer-in-Charge |
| 51 | Providing and fixing wash basin in white shade with C.I. brackets, 15 mm (fifteen millimeters) C.P. brass pillar taps, 32 mm (thirty two millimeters) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:UNDER COUNTER WASH BASIN ZEN CATEGORY No. 10049 SIZE 56 X 43 CM complete of Hindware/Parryware /CERA, Sanitary ware, Naycer make upto all floor level within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 52 | Providing and fixing g white vitreous china pedestal type water closet (European type W.C. pan NO.20011) with seat and lid in white shade of Hindware/Cera with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 53 | Providing and fixing 110 mm x 75 mm (one hundred ten milimeters into seventy five millimeters) PVC Finolex make floor trap working pressure 6.00 Kg per square centimetre (six kilogram per square centemtre) I.S.I. marked of self cleaning design including fixing with approved adhesive including cost of cutting and making goods the walls and floors etc. complete upto all floor level within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 54 | Providing and fixing C.P. brass toilet paper holder JAQUAR,ESS-ESS make including the carriage of material within all leads, lifts through all modes of transportation as per direction of the Engineer-in-charge |
| 55 | Providing and fixing PTMT bib cock of 15mm (Fifteen millimetres) dia ( Superior heavy type ) of made JAL, ESS ESS, Kingstone, Gem, Parko, Techno, Seiko, jaguar within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . |
| 56 | Providing and fixing 15 Fifteen) mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. within all leads and lifts and other incidentals as per direction of Engineer- in- Charge . Please Enable Macros to View BoQ information |
