|
| 1 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. complete with in all lead & lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 2 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame Quantity 28 Unit Point Rate 580 Amount 16240 arma retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 3 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 4 | Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. |
| 5 | 2x1.5 Sq.mm |
| 6 | 2x 2.5 Sq.mm |
| 7 | Providing and fixing of following sizes of PVC casing and capping on surface as required: - |
| 8 | 20 mmx 12 mm |
| 9 | Supplying & fixing wooden boxes of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required: - |
| 10 | 178mm.x102mm.x60mm. Deep |
| 11 | 203mm.x152mm.x60mm. Deep |
| 12 | Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required. |
| 13 | S.P. 5/ 6 Amps one way switch, piano type |
| 14 | S.P. 5/ 6 Amps two-way switch, piano type |
| 15 | S.P 15/16 Amps one way switch porcelain base/ piano type. |
| 16 | Supplying and fixing following rating Piano-type switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 17 | 5 pin, 5/ 6 Amps piano socket outlet |
| 18 | 6 pin,15/16 Amps piano socket outlet |
| 19 | Supplying & fixing blanking plate on the existing modular metal box as required. |
| 20 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required: - |
| 21 | Single pole Cat-A. |
| 22 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required: - |
| 23 | Double pole. Cat-A. |
| 24 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire- set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required: - |
| 25 | Single door-8 way |
| 26 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light pointwith 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required Group C |
| 27 | Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required |
| 28 | Supply and fixing of LED tube light 18W complete. |
| 29 | Supply and fixing of PVC angle / batten holder suitable for LED bulb / tube light including connection, screws, rawl plug etc. complete. |
| 30 | Supply and fixing of LED bulb 9W complete. |
| 31 | Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. |
| 32 | Extra for using salt and charcoal for pipe earth electrode complete as required. |
| 33 | Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt) complete as required. |
| 34 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. |
| 35 | Providing and fixing 25mm x 5mm copper strip in 40 mm dia. G.I. pipe from earth electrode etc. as required. |
| 36 | Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required. |
| 37 | P/F of service wire 16mm 2 single core including all leads and lifts complete in all respects. Please Enable Macros to View BoQ information |
