|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing & Laying of 100 mm nominal size stone soling (dully hand packed) and consolidated with hand rammers etc complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases for columns |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement lime mortar 1:6 ( 1 cement : 6 coarse sand) |
| 13 | Extra for brick work in superstructure above plinth level upto floor five level |
| 14 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): second class kail wood |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. 35 mm thick second class kail wood |
| 17 | providing & fixing 4.0 mm thick glass panes (weighing not less than 10 kg/sqm) with all fixtures, all complete |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured )Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood |
| 19 | Providing and applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 20 | Painting with Synthetic enamal paint of approved brand and Manufacture of required color to give an even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. On wood work |
| 21 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nomina; size |
| 22 | 12 mm thick cement plaster of 1:6 mix ( 1 cement 6 coarse sand) On walls etc complete job |
| 23 | 6 mm thick cement plaster to ceilling of 1:3 mix 1 cement 3 coarse sand complete job |
| 24 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white ivory grey red brown, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 25 | Providing and fixing of bright finished brass hardware fittings with screw etc complete.100 mm Handle |
| 26 | Providing and fixing of bright finished brass hardware fittings with screw etc complete.200 mm Handle |
| 27 | Providing and fixing of bright finished brass hardware fittings with screw etc complete.100x10 Tower bolts |
| 28 | Providing and fixing of bright finished brass hardware fittings with screw etc complete.150x10 Tower bolts |
| 29 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c pan of size 580x440 mm |
| 30 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 31 | Providing and fixing brass stop cock of approved quality. 19.9.1 15mm nominal bore |
| 32 | providing & fixing Pvc water storage tank of approved brand including ball cock with all necessary fittings and fixture complete job |
| 33 | providing & fixing Polyvinyl Chloride (PVC) pipes of approved make and brand including all fitings and fixture Complete job as per direction of engineer in charge including trenching, refilling etc 100 mn Dia |
| 34 | providing & fixing Polyvinyl Chloride (PVC) pipes of approved make and brand including all fitings and fixture Complete job as per direction of engineer in charge including trenching, refilling etc 75 mn Dia |
| 35 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings.This includes testing of joints complete as per direction of Engineer-in-charge. internal work exposed on wall clamps at 1.00 meter spacing PN-16 pipe , 20mm OD(SDR-7.4) |
| 36 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings.This includes testing of joints complete as per direction of Engineer-in-charge. internal work exposed on wall clamps at 1.00 meter spacing PN-16 pipe , 16mm OD(SDR-7.4) |
| 37 | providing & fixing Brass stop cock of approved quality. 15 mm dia. Nominal bore |
| 38 | providing & fixing Brass stop cock of approved quality. 20 mm dia. Nominal bore |
| 39 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5 |
| 40 | carriage of material by mechnical transport from source of supply upto site of work Sand AND Agg 35 kms |
| 41 | carriage of material by mechnical transport from source of supply upto site of work Bricks 25 kms |
| 42 | carriage of material by HEAD LOAD for an Average Lea of 50 MTRS From Dumping site to the Actual Site of work by: SAND/Bajree |
| 43 | carriage of material by HEAD LOAD for an Average Lea of 50 MTRS From Dumping site to the Actual Site of work by: BRICKS |
| 44 | carriage of material by HEAD LOAD for an Average Lea of 50 MTRS From Dumping site to the Actual Site of work by: CEMENT |
| 45 | carriage of material by HEAD LOAD for an Average Lea of 50 MTRS From Dumping site to the Actual Site of work by: STEEL/ ST STEEL Please Enable Macros to View BoQ information |
