|
| 1 | Arthroscopy System |
| 2 | Crochet Hook |
| 3 | Probe hook, knee/shoulder, 3-4 mm tip 1 |
| 4 | Bankart Rasp |
| 5 | Rotator Cuff Grasper (Kingfisher type) with low profile for Arthroscopic procedures |
| 6 | Alligator type tissue grasper |
| 7 | Tissue penetrator cum suture retriever in below angles with Small Sharp penetration tip (Bird-beak type) Straight |
| 8 | Tissue penetrator cum suture retriever in below angles with Small Sharp penetration tip (Bird-beak type) 45 degrees up |
| 9 | Tissue penetrator cum suture retriever in below angles with Small Sharp penetration tip (Bird-beak type) 45 degrees Right |
| 10 | Tissue penetrator cum suture retriever in below angles with Small Sharp penetration tip (Bird-beak type) 45 degrees Left |
| 11 | Multifunctional Suture passer with provision of needle, which can hold the rotator cuff & at the same time pass the suture & retrieve in one step for rotator cuff surgery |
| 12 | Disposable needles with captures for item at serial No. 11 instrument |
| 13 | Switching Stick Large |
| 14 | Nitinol Shuttle/ monofilament to be used with Suture Lasso |
| 15 | Sliding Suture cutter, leaving sufficiently long tail without change of cutting knot |
| 16 | Single hole knot pusher |
| 17 | Reusable cannulated obturator and cannula 6-7mm |
| 18 | Reusable cannulated obturator and cannula 7-8.5mm |
| 19 | Wissinger rod |
| 20 | Suture Grasper |
| 21 | Tissue elevator up |
| 22 | Knife rasp |
| 23 | Tray designed for storage of all the above Instruments with inserts to ensure proper fitting without any chances of damage during transportation |
| 24 | Hook Knife |
| 25 | Double hook Scissor |
| 26 | Tibial Drill Guide Single Point Forked Arm / Handle |
| 27 | Tibial Drill Guide tip/foot print aimer |
| 28 | Tibial Drill Guide elbow aimer |
| 29 | Director Bullet |
| 30 | PCL Tibial Arm |
| 31 | PCL Femoral Arm |
| 32 | Depth Gauge for tunnel measurement |
| 33 | 5.0mm Femoral Reamer 3-Fluted |
| 34 | 5.5mm Femoral Reamer 3-Fluted |
| 35 | 6.0mm Femoral Reamer 3-Fluted |
| 36 | 6.5mm Femoral Reamer 3-Fluted |
| 37 | 7.0mm Femoral Reamer 3-Fluted |
| 38 | 7.5mm Femoral Reamer 3-Fluted |
| 39 | 8.0mm Femoral Reamer 3-Fluted |
| 40 | 8.5mm Femoral Reamer 3-Fluted |
| 41 | 9.0mm Femoral Reamer 3-Fluted |
| 42 | 10.0mm Femoral Reamer 3-Fluted |
| 43 | 11.0mm Femoral Reamer 3-Fluted |
| 44 | 12.0 mm Femoral Reamer 3-Fluted |
| 45 | Meniscal diamond rasp for freshening of the tear. |
| 46 | 5.0mm Cannulated Drill bit for Tibial Preparation |
| 47 | 6.0mm Cannulated Drill bit for Tibial Preparation |
| 48 | 7.0mm Cannulated Drill bit for Tibial Preparation |
| 49 | 8.0mm Cannulated Drill bit for Tibial Preparation |
| 50 | 9.0mm Cannulated Drill bit for Tibial Preparation |
| 51 | 10.0mm Cannulated Drill bit for Tibial Preparation |
| 52 | 11.0mm Cannulated Drill bit for Tibial Preparation |
| 53 | 12.0 mm Cannulated Drill bit for Tibial Preparation |
| 54 | Slotted Graft Sizing Block for checking thickness of tendon 7-12 mm in intervals of 0.5mm. |
| 55 | Chondral Pick 20 degree, |
| 56 | Chondral Pick 40 degree |
| 57 | Endo-Femoral Aimer with 5mm Femoral Aimer, 6mm Femoral Aimer, 7mm Femoral Aimer |
| 58 | Notch curette (8mm)– 1 |
| 59 | Tendon Stripper, Open |
| 60 | Tendon Stripper, Close |
| 61 | Diamond Probe for meniscus repair |
| 62 | Cannulated drill bit 4.5 mm |
| 63 | Measuring probe for meniscus repair for measurement of the meniscus tear from meniscocapsular Junction |
| 64 | 5mm calibrated probe |
| 65 | Suture grasper |
| 66 | Autoclavable ACL Tray (with Lid) with inserts to ensure proper fitting of all instruments without any chances of damage during transportation |
| 67 | PCL back stopper |
| 68 | PCL liberator/rasp |
| 69 | PCL curette |
| 70 | Bio Screwdriver |
| 71 | Meniscal root repair Jig containing Left and right /Universal aimer |
| 72 | Open curette for meniscal root repair |
| 73 | Offset for double/single tunnel meniscal root repair |
| 74 | Graft Preparation board : Graft board with gliding sliders for easy and single-handed operations Suitable for single bundle, double bundled and Compatible with endo button type fixation devices Provisions for specific graft tensions Graft clamp teeth for securing graft for tensioning during preparations with Base for ACL Workstation, Tray for ACL Workstation, Muscle Removal Board, Slider, Stationary Post, Stationary Clamps, Stationary Tensioner |
| 75 | Drill Guide / Graft Sizer Please Enable Macros to View BoQ information |
