|
| 1 | Providing Pneumatic Road Roller for levelling work etc. complete. Spec. No: - As directed by Engineer in charge |
| 2 | Material Shifting by truck Spec. No: - As directed by Engineer in charge |
| 3 | Providing and supplying water tanker from borewell upto 10,000 lit. capacity as directed by Engineer in Charge. Spec. No: - As directed by Engineer in charge |
| 4 | Providing and supplying water tanker of filtered water from PMC upto 10,000 lit. capacity as directed by Engineer in Charge. Spec. No: - As directed by Engineer in charge |
| 5 | Tandem Vibratory Road Roller 8 tonne for levelling work etc. complete |
| 6 | Dumpper of 5 Cu.Mt Capacity for debris, rabbit, soil,material shifting and other cleaning,miscellaneous work |
| 7 | Dumpper/Tipper of 8.5 Cu.Mt Capacity for debris, rabbit, soil,material shifting and other cleaning ,miscellaneous work |
| 8 | Dumpper/TIPPER of 10 Cu.Mt Capacity for debris, rabbit, soil,material shifting and other cleaning,miscellaneous work |
| 9 | Tractor with Trailer |
| 10 | Unskilled Heavy Male / Female |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete,with reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic microprocessor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement In mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 14 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complet |
| 15 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen daysscaffolding etc.complete |
| 16 | Repair & maintenanceof BB Chambers by increasing ht. upto 300 mm Spec. No: - As directed by Engineer in charge |
| 17 | Repair & maintenance of BB Chambers by decreasing ht. upto 300 mm Spec. No: - As directed by Engineer in charge |
| 18 | Providing Bobcut for cleaning levelling, digging and miscellionous work etc complete |
| 19 | Providing J.C.B. with breaker for digging of road for passing pipeline and other miscellaneous work |
| 20 | Providing J.C.B. for cleaning, levelling, digging and miscellanous work etc. complete. |
| 21 | filling in plinth & floors with contractors soil Sp. No. Bd A 11 Page No.263 |
| 22 | Spreading hard murum for side width etc. complete Spec : MORTH 408 |
| 23 | Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. Please Enable Macros to View BoQ information |
