|
| 1 | Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms.measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the removal of rubbish upto area cleared. SOR/259(i) Same as above but grass only SOR-20/259(a)/4.06 |
| 2 | Tractor with trolley including POL driver (AR/GNIDA) SOR-20/SL.NO.19/ Chapter 2 |
| 3 | Supply of labour SOR-20/SI.NO.12/Chapter 2 |
| 4 | Surface dressing of the ground including removing vegetation and in equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m (All kind of soil) DSR-18/2.28.1 |
| 5 | Tractor with trolley including POL driver (AR/GNIDA) SOR-20/SL.NO.19/ Chapter 2 |
| 6 | Supply of labour SOR-20/SI.NO.12/Chapter 2 |
| 7 | Providing JCB with driver and including POL (AR/GNIDA) (SOR-20/S/NO. 31/Chapter 2) |
| 8 | Excavation in foundation in ordinary soil (loam,clay or sand) including lift up to 1.50 m. and lead up to 30m. and including filling watering and ramming of excavated earth into the trenches or into the space of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30m. from the foundation trenches ( where machine con not rech/move).SOR-251a |
| 9 | Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. (DSR-2018/2.24.1/A.R.) |
| 10 | Cartage of earth or fly ash when added to schedule item no. 253. (SOR-251a) |
| 11 | Lead upto 1.0 Km. |
| 12 | Excavation in foundation in ordinary soil (loam,clay or sand) including lift up to 1.50 m. and lead up to 30m. and including filling watering and ramming of excavated earth into the trenches or into the space of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30m. from the foundation trenches ( where machine con not rech/move).SOR-251a |
| 13 | Supplying at site: R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately). (DSR-2018/16.15.1/AR) |
| 14 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (SOR-2020/281) |
| 15 | Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. (DSR-2018/13.100.1/AR) |
| 16 | Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). (DSR-2018/16.85/AR) |
| 17 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR-18/16.69) |
| 18 | White washing with lime to give an even shade:Old work (one or more coats) |
| 19 | Tractor with water tanker with cost water including POL SOR-20/SI.NO.27/Chapter 2 |
| 20 | Supply of labour for water tanker (AR/GNIDA) |
| 21 | Hiring of portable Re-cycle jetting calus section machinenmounted on mahindra volero maxi with hydraqulically operate mahindra de-silter upto depth of 15 water with driver for the area to gr.noida as direated by engineer in-chare for 8.50 hours per day overfine will be paid on pro rate basic processure 3000 PSI liters, rate as per noida (GNIDA) |
| 22 | Labour Cess and GST will be paid extra as per govt.orders Please Enable Macros to View BoQ information |
