Housing Urban and Rular Development Government Departments Closing in 0 days TDR #54758310

Tender For Construction Of Demonstration Housing Project On Design & Build Basis At Alwar, Rajasthan Under Pmay-U 2.0

Issued by Government Departments · Alwar, Rajasthan
Tender Value
7.20 Crore
Estimated cost
Bid Submission
20 Apr 2026
0 days left
EMD
14.42 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Demonstration Housing Project On Design & Build Basis At Alwar, Rajasthan Under Pmay-U 2.0

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 07-Apr-2026 Corrigendum 01 DHP at Alwar Technical Bid 13-Apr-2026
2 14-Apr-2026 Extension of last date Date 20-Apr-2026
3 07-Apr-2026 Corrigendum 01 DHP at Alwar Technical Bid 20-Apr-2026

BOQ

Name of Work:- CONSTRUCTION OF DEMONSTRATION HOUSING PROJECT ON DESIGN & BUILD BASIS AT ALWAR, RAJASTHAN UNDER PMAY-U 2.0
Sl. No. Item Description
1HEAD A - DWELLING UNITS AND OTHER PROVISIONS
2Total cost of construction of Buildings (dwelling units and facility centre) including all associate facilities & services, fire-fighting, handicap ramp and staircase with stainless steel railing, mumty, plinth protection and other provisions complete in all respect as per scope of work with specifications and drawings mentioned in Bid document & including GST, Labour Cess, other Taxes and complete maintenance for 5 years.
3HEAD B - ON SITE INFRASTRUCTURE WORKS (on Item Rate Basis) including GST, Labour Cess and other Taxes
4SUB-HEAD 1
5EARTH FILLING
6Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
7Extra for lead beyond 5 km (Rate Only)
8Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth
9Deduct for not watering the excavated earth for banking
10Extra for Dewatering work (rate only)
11SUB-HEAD 2
12ROAD AND PAVEMENT
13Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
14Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge (All kinds of soil)
15Disposal of surplus excavated earth within a lead of 5 km beyond the initial lead of 50m as directed by Competent authority
16Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level.(100 mm thickness)
171:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
18Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Competent authority. (100 mm thickness) (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverableseparately).
19Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres.
20with common burnt clay F.P.S.(non-modular) bricks of class designation 7.5 (both sides)
21Interlocking Paver
22Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of BMTPC or Site Engineer.
23SUB-HEAD 3
24BOUNDARY WALL WITH ENTRANCE GATE
25Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
26All kinds of soil. For column footing
27Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level.(100 mm thickness)
281:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
29Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
301:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). (Colum)
31Centering and shuttering including strutting, propping etc. and removal of form for :
32Columns, Pillars, Piers, Abutments, Posts and Struts
33Lintels, beams, plinth beams, girders, bressumers and cantilevers
34Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above
35Thermo-Mechanically Treated bars of grade Fe-500D or more (@125cum)
36Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of BMTPC. (The payment of RCC band and reinforcement shall be made for separately). (Rate only)
3712 mm cement plaster of mix :
381:6 (1 cement: 6 coarse sand)
39Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
40New work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and including priming coat of exterior primerapplied @ 0.90 litre/10 sqm
41Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
42Entrance Gate
43Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.
44With G.I. barbed wire
45Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete
46Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
47Two or more coats on new work over an under coat of ordinary paint
48BOUNDARY WALL WITH PROPOSED TECHNOLOGY
49Providing & installation of 2.1 meter high boundary wall of technology proposed for building work over plinth beam with fixing fencing over it consisting of angle iron posts with 9 rows of G.I barbed wire including coping, finishing etc. all complete as per approved drawing and direction of BMTPC. (Rate Only)
50SUB-HEAD 4
51EXTERNAL WATER SUPPLY
52Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer of BMTPC.
5340 mm nominal outer dia pipes
54Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
5540 mm nominal bore.
56SUB-HEAD 5
57SEWERAGE
58Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
59Depth upto 1.5 m
60Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
61Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
62Extra for depth for manholes :
63Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
64All kinds of soil
65Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
66Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
67Man holes
68Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete :
69150 mm dia
70250 mm dia
71Disposal of surplus excavated earth within a lead of 5 km beyond the initial lead of 50m as directed by Competent authority
72Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
73250 mm diameter
74SUB-HEAD 6
75DRAINAGE AND DISPOSAL
76Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
77In all kinds of soil.
78Depth upto 1.5 m
7912 mm cement plaster finished with a floating coat of neat cement of mix :
801:4 (1 cement: 4 fine sand)
81Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
82Cement mortar 1:6 (1 cement : 6 coarse sand)
83Disposal of surplus excavated earth within a lead of 5 km beyond the initial lead of 50m as directed by Competent authority
84Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level.(100 mm thickness)
851:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
86Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos. longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
87SUB-HEAD 7
88UNDER GROUND WATER TANK
89Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Depth upto 1.5 m
90All kinds of soil
91Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :
921:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
93Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
941:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
95Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
96Thermo-Mechanically Treated bars of grade Fe-500D or more(@125/cum
97Centering and shuttering including strutting, propping etc. and removal of form for :
98Foundation, base of walls, columns etc.
99Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
100Suspended floors, roofs, landings, balconies and access platform
10112 mm cement plaster of mix :
1021:6 (1 cement: 6 fine sand)
10312 mm cement plaster finished with a floating coat of neat cement of mix :
1041:4 (1 cement: 4 fine sand)
105Steel work welded in built up sections/ framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
106In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
107Supply & Installation of Mono Block Pump with starter of approved brand complete (2HP)
108SUB-HEAD 8
109RAIN WATER HARVESTING
110Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction upto 90 metre depth below ground level. All types of soil
111300 mm dia
112Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, asper direction
113150 mm nominal size dia
114Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction
115Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction
116Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction
117Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction
118Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450 x 50mm, reinforced with 8 mm dia four nos. longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction
119Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by BMTPC or Site Engineer.All kinds of soil
120Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
121Brick masonry in foundation with brick of class des.75 in CM 1:6
122Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
12320 mm cement plaster
124Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level.
1251:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
126Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks
127Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
128Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
129All kinds of soil
130Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
131Providing and fixing on wall face un-plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
132110 mm diameter
133Providing and fixing on wall face un-plasticised - PVC moulded fittings / accessories for un-plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion
134Bend 87.5°
135150 mm diameter
136SUB-HEAD 9
137HORTILCULTURE
138Supplying and stacking at site dump manure from approved source including all lead and lifts (manure measured in stacks will be reduced by 8% for payment) - screened through sieve of IS designation 20 mm.
139Supplying & stacking sludge at site including royalty & carriage will all leads & lifts (sludge manure measured in stacks will be reduced by 8 % for payment)
140Spreading of sludge / damp manure of / and good earth in required thickness (cost of sludge/ damp manure or / land good earth to paid separately)
141Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth.
142In rows 5 cm apart in both directions
143Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
144Supplying & Stacking of Selection No.1 doob grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc. and as per direction of officer in charge.
145Supply and Planting of Croton Golden plant, having ht. 45 cm to 60 cm with 2 to 3 branches, well developed, fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot as per direction of the officer-in-charge. ( As per local conditions suitability)
146SUB-HEAD 10
147EXTERNAL ELECTRIFICATION
148P/Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, 2ndclass bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size..
14935.0 Sq.mm
1503.5 core
15135.0 Sq.mm up to 95 Sq.mm
1522 core
153Supplying and making one end termination with heavy duty single compression brass gland SIBG type, aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required of size.
1543.5 x 35.0 sq.mm
1552 x 6.0 sq.mm
156Supply and fixing of floor mounting, totally enclosed, compartmentalized, cubical, dust, vermin proof and outdoor type. Feeder pillar fabricated out of 2 mm thick cold rolled carbon annealed, sheet steel, internally strengthened with angle iron frame work with following incoming and outgoing feeders (fabricated out of 2 mm CRCA Sheet steel) including making connection / inter-connections with lugs / glands crimping tools, testing and commissioning of following items inside the panel:
157Incommer
1581 No. 200 Amp. 4 poles MCCB (25 Ka) with ON/OFF indications metre
159Indication
160Three (3) Nos. phase indicating (R.Y and B) lamps with protection 2A SP MCB's for protection having lens and lamp.
161Outgoing
162One (1) NO. 160 Amp. 4 pole MCCB (16 KA) with ON/OFF indications in the infront 15 nos. 32 A D.P. MCB (10 KA)
163Control
1644 Pole Contractor with a thermal rating of 32 - 1 no.
165Time Switch with Daily dial, suitable for operation on 230 Volt, Single phase, 50 Hz, AC supply - 1 No.
166Auto - Manual Selector switch - 1 No.
167On / Off Push Buttons - 4 Nos.
168Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
169Supply, installation and commissioning of SPV Solar Street Light (white LED Based) System as per specifications including supplying of 75 mm dia (nominal) (Medium class), 5.5 metre length (including accessories) complete with base plate and nipple including two coats of black bituminous paint upto 1 mtr. From bottom and two coats of aluminium paint above ground level etc. complete as required. Detail of pole: Planting depth - 1 Mtr and Height above ground level - 4.5 Mtr. over concrete pedestal, 15 Watt LED light Phillips/ Bajaj/ Crompton or Suitable Equivalent.
170Supply, installation and commissioning of Solar Panel with 500 Watt for 48 number lighting points in common areas (corridor & Staircase) at suitable locations including LED bulbs with 10 Watt
171Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths below natural ground / Road top level.
172In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.
173Depth upto 1.5 m
174Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :
1751:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size).
176Centering and shuttering including strutting, propping etc. and removal of form for : Foundation etc.
177Supplying, installing on wall, testing and commissioning of following capacity made of 1.6 mm thick sheet steel enclosure duly painted with powder coating, wall straps bus bar 100 amp. of size 400 x 300 mm
178Supplying, installation, testing & commissioning of 200 KVA transformer including service connection and all basic infrastructure to make the transformer functional of approved brand & make by BMTPC complete in all respect.
179SUB-HEAD 11
180TUBE WELL
181Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level
182All types of soil
183Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction
184100 mm nominal size dia
185Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction
186Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge.
187Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:
188100 mm dia
189Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
190100 mm dia
191Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I).
192100 mm dia
193Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
19425mm pipe
195Submersible Pump-15HP
196Starter
197Electrical Flat Cable Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 54758310
AUTHORITY Government Departments
TENDER VALUE 7.20 Crore
LAST DATE 20-04-2026
Authority
Authority Name Building Materials And Technology Promotion Council
Work Description Tender for Construction Of Demonstration Housing Project On Design & Build Basis At Alwar, Rajasthan Under Pmay-U 2.0
Basic Detail
Tender No BMT/S/2026/DHP-Rajasthan
Bidding Type Tender
Location
City Alwar
State Rajasthan
Key Dates
Publish Date 07 Apr 2026
Submission Date 20 Apr 2026
Open Date 01 Jan 0001
Finance
Tender Value 7.20 Crore
Tender Fee 5000
EMD 14.42 Lakhs
Exemption Available
Document List
4096cbf0-2b64-4cfe-8ab2-dcf774e77bf8.html
BOQ_949281.xls
Tendernotice_1 (1).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Apr 13, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Apr 20, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Apr 20, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Apr 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed

Tender Documents

Download All (ZIP) ↓
html

4096cbf0-2b64-4cfe-8ab2-dcf774e77bf8.html

xls

BOQ_949281.xls

pdf

Tendernotice_1 (1).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders