|
| 1 | Providing single under reamed bored compaction pile foundation of 300mm dia & 6.00m length long with reinforced cement concrete of M-20 grade using 12mm size black hard granite (C.B) stone chips, boring from existing ground level with removal of obstruction if any, using bentonite,providing required reinforcement as per drawing making the end of the cage to Conical shape, welded properly, providing 750mmdia under ream at appropriate level and disposal the boring earth from work site with supply of all labour, T&P, taxes, Port enry fees, hire & running charges of all machineries reuqired for the work etc. transportation charges all taxes but excluding GST etc.complete as directed by the Engineer-in-charge . NB:One initial load test and one routine load test ( as per IS 2911 pt-IV) must be conducted. The agency will pay all the expenses.(excluding cost of reinforcement steel and binding wire). |
| 2 | Cutting pile head up to cut off level including disposing of the dismantled material out of work site, barricating the work site if necessary with supply of all materials, labour, T&P,PPE, royalties,tollages, hire & running charges of all machineries, transportation charges, all taxes excluding GST etc all complete as directed by the Engineer-in-charge. |
| 3 | Earth work in all kind of soil with initial lead and lift including rough dressing and the excavated earth transported by vehicles with supply of all material, labour, transporation cost , taxes , tollage , royalties etc all complete but excluding GST as directed by Engineer-in-charge. |
| 4 | Filling in foundation and plinth with excavated all kind of soil including watering and ramming with supply of all material labour transporation , taxes , tollage , royalties etc all complete but excluding GST as directed by EIC. as directed by the Engineer-in-charge |
| 5 | Filling the low laying area with saline sand or dreged spoil as per required level in layer wise ,each layer not exceeds 0.30m.,watering ,compacting etc all complete including Supply of all material , labour , T&P, hire and running charge of Equipments , taxes ,tollage etc all complete but excluding GST. as directed by EIC. (NB- 10% void shall be deducted from measured Qnty) |
| 6 | P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes , tollage , royalties etc all complete but excluding GST as directed by Engineer-in-charge. |
| 7 | Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips for foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour,T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.N.B:Regular cube test and after completion of work core cutting test will be conducted . The agency will execute the test with paying the test expenses. |
| 8 | Supply Tor/TMT steel rebar of minimum grade Fe 500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour,materials, transportation charges, T&P, taxes, etc. all completebut excluding GST as per the direction of Engineer-in-charge. NB: (i)No payment shall be made for extra weight than theoretical co-efficient. (ii) Manufacturing test certificate must be provided before payment of bill. |
| 9 | Providing rigid smooth leak proof centering & shuttering etc made of steel/ply, plank of approved quality for R.C.C. structures and de shuttering and removing the same after due period over with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in -charge. |
| 10 | Beam, column, girder |
| 11 | R.C.C. foundation and footing bases of columns mass concrete & pre-cast slab etc. |
| 12 | Design ,fabricating , supply and fixing of Stainless Steel (Gr-304) sections (IS 4923:2017),railling made of hollow tubes,channels,plate,including welding ,grinding.buffering ,polishing and making curvature where necessary and fixing the same with necessary accessories & SS dash fasteners,bolts etc with supply of all materials,labour, T&P, taxes if any excluding GST ,etc all complete as directed by the Engineer-in-charge. |
| 13 | Brick work in Fly ash Bricks of size 25cmx12cmx8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing etc. all complete but excluding GST as per direction of Engineer-in-charge. |
| 14 | For Foundation & plinth |
| 15 | For Ground Floor |
| 16 | For First Floor |
| 17 | 12 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge. |
| 18 | Supplying fitting fixing of 20 mm thick granite 0.10 SQM TO 0.40 Sqm ( premimum Quality ) as approved by EIC in floors ,treads or steps and landing on 25mm thick bed of cement mortar 1:1(1cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and wax polishing complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.(New work) |
| 19 | Supplying, fitting, fixing of solid stainless steel letter writing upto 200mm wide x 300mm depth at identified location with supply of all labour, materials, scaffolding, T&P, royalities, taxes if any excluding GST etc all complete as directed by the Engineer-in-charge. |
| 20 | Providing, supplying, fitting, fixing of M.S. grills, plate and channel section at 200 X 75 mm for post and track of approved size ,shape quality & design with fastenings including fabrication charges, with supply of all labour, T&P, materials, taxes, etc. all complete as per direction of Engineer-in-charge.(Excluding GST)NB:For payment purpose the final weight of the memberance shall be considered excluding fastenings. |
| 21 | M.S. grills |
| 22 | M.S. plate and channel section at 200 X 75 mm |
| 23 | Painting two coats with approved quality & shade enamel paint on new iron work over one coat of red oxide primer including scraping,cleaning, the old paint surface by sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour,T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding cost of GST as per direction of Engineer-in charge. |
| 24 | One coat Priming with water bound cement primer manufactured by reputed manufacturer of approved make & shade over the newly plastered surface after cleaning the surface and make an even finished surface at all heights including cost and supply of all materials, labour, T&P, taxes,transportation, staging, scaffolding, etc. complete and as directed by the Engineer-in-charge. (Excluding the cost of GST) |
| 25 | Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus,Fading, including scraping, cleaning, brushing, washing the old paint, removing the flakes and applying uniformly two coats of paints with a time interval of minimum 24 hrs including cost and supply of all materials, labour, T&P, taxes,transportation, staging, scaffolding, etc. complete and as directed by the Engineer-in-charge. (Excluding the cost of GST) |
| 26 | Engagement of Hydraulic Excavator of 1cum bucket capacity & tractor for site cleaning & levelling including hire & running charges of machineries, fuel , lubricants , operator expenses , T & P , safety of operator, all taxes excluding GST etc.all complete as directed by the Engineer-in-charge.(N.B : No idle charges shall be paid ) |
| 27 | Hydraulic Excavator of 1cum bucket capacity |
| 28 | Tractor with trolly Please Enable Macros to View BoQ information |
