|
| 1 | Dismantling wall and ceilling board (fibre, pulp, insulation etc) or insulation board/ slabs/ blanket any thickness including cover fillets all as specified and as directed |
| 2 | Dismantling timber plain fillets,rectangular in section with nails exc 13 and n.exc 25, all as specified and as directed |
| 3 | M&L 9mm thick Pre- laminated particle board, interior grade, prelaminated one side with, decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work at wall all as specified and as directed. |
| 4 | M&L 9mm thick Pre- laminated particle board, interior grade, prelaminated one side with, decorative choice lamination & other side balancing white lamination, fixed with Nails to timber frame work at ceiling all as specified and as directed. |
| 5 | S&F in repair second class softwood plain fillets,rectangular in section, clean sawn, secured with nails exc 13 and n.exc 25, complete all as specified and directed. |
| 6 | S&F in repairs 2nd class hard wood plain fillets, square, rectangular in section, sectional area exe 3 sqcm & n. exe 6 sqcm clean sawn, secured with nails or brads, complete all as specified and directed. |
| 7 | Dismantling of mild steel work of any description not otherwise provided for etc |
| 8 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 9 | S&F steel work as in tubular truss purlin rafter incl. washer incl. necessary cutting welding etc all as specified . |
| 10 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering all as specified and as directed . |
| 11 | S&F Galvanised MS sheeting of 0.63 mm thick with Zinc coating of 275 corrugated ISI Marked and made with two corrugation side laps and fixed with L-types and J-type hook with bituminous felt and steel washers as in roof & wall, complete all as specified and directed. |
| 12 | All as per item No.11 above but except sheets, complete all as specified and directed. |
| 13 | S&F plain, galvanised MS sheeting of 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 14 | Supplying, fitting and fixing in repair8mm thick Waterproof Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not less than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a resin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thick underlayer polyurethane foam on polythene sheet 250 microns, over a smooth, flat, hard subfloor free from moisture (<8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge |
| 15 | M&L for taking down and refixiing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware ect, complete all as specified and directed. |
| 16 | M&L for preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 17 | M &L for Preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint, complete all as specified and as directed. |
| 18 | Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide, complete all as specified and as directed. |
| 19 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
