|
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge. |
| 2 | Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15cm thick below or above ground level complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for 75mm thick, PCC type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base flooring surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for 25mm thick PCC type B-0 (12.5mm graded stone aggregate) 1:2:4 as in floor or similar works complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge |
| 6 | M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 and n.exc 0.38 Sqm in floors over 15mm thick screed bed in cement mortar 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed by Engr-in-Charge. |
| 7 | M&L for endura tiles, heavy duty type of size 300x300mm, 10mm thick, non skid, acid and scratch resistance laid over 15mm thick screed bed in CM 1:4 as in floor, jointed in neat cement slurry and pointed with white cement and pigment to match the shade completed all as specified and as per direction of manufacturer instuctions and complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for Coloured Glazed ceramic tiles of size 300x450x7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for chequered cement concrete tiles 300x300x25mm thick with grey cement and pigment and set jointed and pointed in neat cement slurry as in floor over 20 mm thick sreed bed or bedding layer in CM 1:4 complete all as specified and directed by Engr-in-Charge.Make :- Jullay, Ladakh, Ultra |
| 10 | Dismantling of Stone sett paving of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed by Engr-in-Charge |
| 11 | M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25mm thick sand cushion complete all as specified and directed . (Note- Sand cushion measured and paid seperately)Make:- Jullay, Ladakh, Ultra |
| 12 | All as per Srl Item No.11 above but except interlocking tiles complete all as specified and directed by Engr-in-Charge. (Note- Sand cushion measured and paid seperately) |
| 13 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for granite work (table rubbed, polished and moulded) 18-20 mm thick as in steps,jambs, pillars, plateforms and like machine cut bedded and jointed & pointed with white cement and pigment to match the shade of granite stone incl grinding and polishing over 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed bed in CM 1:4 laid over cement slurry, pointed and jointed with grey mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge |
| 16 | M&L for rubbing and treating kota stone / marble slab surfaces with mirror polishing including cleaning etc with polishing machine complete all as specified and directed by Engr-in-Charge. |
| 17 | Taking up or down steel water tubing of 20mm dia bore and connection incl cleaning for refixing or removal to stores complete all as specified and directed by Engr-in-Charge. |
| 18 | Taking up or down steel water tubing of 25mm dia bore and connection incl cleaning for refixing or removal to stores complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for 25mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 21 | Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-charge |
| 22 | M&L for precast cement concrete type C1 1:3:6 (using 20mm graded aggregate) block masonry with soild block, exc 10cm width and setting in cement mortor 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 23 | Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for rendering 15 mm thick in CM 1:6 on other fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 26 | M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bound emulsion paint over a coat of primer complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in repair 10ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle incl brackets complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F in repair 15mm Stop valve/angle cock, fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F in repair 15mm Cast copper alloy, Chromium Plated Bib tap fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F in repair CP health faucet with 1 meter flexible hose and stand complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F in repair 15mm bore Pillar taps cast copper ally, with capstain head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F in repair CP wall mixture with telephonic shower mixing with hot & cold water secured down for iron pipe complete all as specified and as directed by Engr-n-Charge. |
| 34 | S&F in repair CP centre hole basin mixture, mixing with hot & cold water secured down for iron pipe complete all as specified and as directed by Engr-in-Charge. |
| 35 | S&F in repair 450 mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed by Engr-in-Charge. |
| 36 | Dismantling water storage tanks of capacity exc 250 & n.exc 500 ltrs and removing to store complete all as specified and as directed by Engr-in-Charge. |
| 37 | Dismantling water storage tanks of capacity exc 500 & n.exc 1000 ltrs and removing to store complete all as specified and as directed by Engr-in-Charge. |
| 38 | S&F rotational moulded polyehtylene water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F PUF tank of capacity 500 ltrs fixed and hosited in position complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F rotational moulded polyehtylene water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F PUF tank of capacity 1000 ltrs fixed and hosited in position complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F in repair Cabinet mirror 5mm thick of selected quality glass, mounted on wall and plugs with chromium plated brass and cup washers complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repair Vitreous china squatting pan, Orissa Pattern size 580mm x 440 white incl connection to floor trap with integral foot rest but excluding flushing cistern and flush pipe including placing in position complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F in repair High grade stainless steel toilet pan of size 58.5x48.2x30.0 cm (excludiig flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F in repair vitreous china wash hand basin white counter type 570x450mm fixed on granite slab incl waste pipe, cutting for erecting granite slab if required complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F in repair one piece EWC chinaware with soft closet cover and mounted flushing cistern of size 620x370x670mm white in colour complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and incliding white plastic water closet seat cover with mild steel CP or aluminisied hinging device complete all as specified and as directed by Engr-in-Charge |
| 48 | S&F in repairs 32 mm dia bore PVC flexible pipe for wash hand basin/kitchen sink complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge |
| 50 | S&F in repair 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in repair 110mm bore, PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F in repair 75mm bore, PVC (SWR), bends any radius complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repair, Grating doom, 150mm dia of cromium plated (minimum weight 150gms) complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F in repair plastic water closet seat cover, black, closed pattern with flat bottom, and cover and mild steel chromioum plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. |
| 55 | Note : Deduction for amount of Rs. 19635.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract. Please Enable Macros to View BoQ information |
