|
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all specified and as directed. |
| 2 | Demolition of brickwork or stone masonary or block masonary etc built in cement mortar of any description including excavation and removal where ever required for embeded portion, complete all specified and as directed. |
| 3 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all specified and as directed. |
| 4 | Ditto all as per item No 3 above but except stones built in cement mortar 1:4, complete all specified and as directed. |
| 5 | M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4, complete all specified and as directed. |
| 6 | Ditto all as per item No 5 above but except Brick built in cement mortar 1:4, complete all specified and as directed. |
| 7 | M&L for rendering 10mm thick in CM 1:4 over stone wall surfaces and finished even & smooth without using extra cement, complete all specified and as directed.. |
| 8 | M&L for rendering 15 mm thick in CM 1:4 over stone wall surfaces and finished even & smooth without using extra cement, complete all specified and as directed. |
| 9 | M&L for painting newly wall surface with two of cement paint on wall surface, complete all specified and as directed. |
| 10 | Keyed pointing to random or polygonal rubble in cement mortar 1:4, uncoursed or brought upto course, complete all specified and as directed. |
| 11 | Demolition of cement concrete in ground floor and paving n. exc 15 cm thickness (below or above ground level), complete all specified and as directed. |
| 12 | M & L for hard core of broken stone or boulders of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick , watered and rammed to a true surface, complete all specified and as directed. |
| 13 | M&L for Cement concrete in foundations,filling and mass concrete type D2 1:4:8 (40mm graded aggregate), complete all specified and as directed. |
| 14 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft and loose soil, complete all specified and as directed. |
| 15 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in hard/dense soil, complete all specified and as directed. |
| 16 | Removing excavated soil to a distance n.exceeding 50mtr and depositing where directed at a level n.exc 1.5mtr above the starting pointing, complete all specified and as directed. |
| 17 | Use and waste of Formwork square,rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions,add for fair finished surfaces etc, complete all specified and as directed. |
| 18 | Use and waste of Formwork flat to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter,add for fair finished surfaces etc, complete all specified and as directed. |
| 19 | M&L for Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete type B1 1:2:4 (20mm graded aggregate), complete all specified and as directed. |
| 20 | M&L for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like type B1 1:2:4 (20mm graded aggregate), complete all specified and as directed. |
| 21 | M&L for providing , plain cement concrete type B0 1:2:4 (12.5 mm graded stone aggregate)in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and lacing coursse, parapets and railings, upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary formwork, complete all specified and as directed. |
| 22 | Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all specified and as directed. |
| 23 | S&F for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe 410-w (Gde-E-250) quality-A including distance pieces, cleats etc.complete all as specified and directed.Angle Size(50x50x4)mm.as use in Y joint for Fencing, complete all specified and as directed. |
| 24 | M&L for painting Old steel Surfaces two coat of synthetic enamel paint of any description, over 10cm in width or girth,not otherwise described, complete all specified and as directed. |
| 25 | M&L for painting newly steel Surfaces two coat of synthetic enamel paint over one coat of red oxide of any description, over 10cm in width or girth,not otherwise described, complete all specified and as directed. |
| 26 | S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including dismantling, complete all specified and as directed. |
| 27 | S&F Punched Tape Concertina oil (including Spike and Handle) with 50 turns and dia 1050mm. Max covered length 10RM, having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire (2.6 + 0.35mm dia) are electro galvanized to provide protection against out door exposure. The punched tape shall be mechanically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil; steel clamps \\" total 129 Nos per coil spaced\\" to connect the individual turns of the coil to each other so that it opens up like an accordion. The widyh of strip as 19mm and spacing of blades 24.00 + 0.5mm C/C The weight of each coil will be 15.2 + 5% Kgs without packing material and coil length 15 mtr when opened up with an effective height 915mm each coil wound with bituminized hessain cloth for providing protective packing ref specification No CQAE/5660/1602/a foe raw material and drawings IMGA-0112/B ( Sheet 1 of 2 ), IMGA - 0112/C (Sheet 2 of 2 ) IMPD - 1817/B, IMPD -1820, IMPD-1821, IMPD-1822 incl dismantling, complete all specified and as directed. |
| 28 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm getting out soft and loose soil, complete all specified and as directed. |
| 29 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded concrete,brick work,masnory portion and making good disturbed ground, complete all specified and as directed. |
| 30 | M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate) in walls or retaining walls,any thickness, size or shape including pilasters, buttresses columns, pillars,boundary pillars and posts (including caps and bases).complete all as specified and directed. |
| 31 | Surfaces of any description, over 10cm in width or girth,not otherwise described, complete all specified and as directed. |
| 32 | S&F for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe 410-w (Gde-E-250) quality-A including distance pieces, cleats etc.complete all as specified and directed.Angle Size(65x65x6)mm, complete all specified and as directed. |
| 33 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings, complete all specified and as directed. |
| 34 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all specified and as directed. |
| 35 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if n.exc 4kg per sqm, complete all specified and as directed. |
| 36 | S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt 3 cm and 10mm dia, complete all specified and as directed. |
| 37 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all specified and as directed. |
| 38 | S&F for Chain link MS galvanised fencing, any size or type, complete all specified and as directed. |
| 39 | Note:- Schedule of credit Rs 15,134.55 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
