|
| 1 | Taking out submersible pumping set of any capacity including suction pipe of any length and any dia from base well of any dia and lowering the same after necessary repair including water supply and electric supply connection and including transportation from site to work shop & testing complete all as specified and directed. Note : Repairing of pump set will be measured and paid separetely. |
| 2 | S&F spare parts for submersible pump sets capacity 3 HP to10 HP as under :- Shaft bush. |
| 3 | Supply only Coupling |
| 4 | Supply only Thrust plate. |
| 5 | Supply only Neck ring. |
| 6 | Supply only Impeller distance bush. |
| 7 | Supply only Impeller key. |
| 8 | Supply only Impeller. |
| 9 | Supply only Thrust bearing. |
| 10 | Supply only Bush Stainless steel for impeller. |
| 11 | Supply only Bush GM for Rotter. |
| 12 | Supply only Shaft stainless steel for pump |
| 13 | Supply only Guide/distance bush GM. |
| 14 | Supply only Nipple stainless steel flange type for NRV |
| 15 | Supply only Sand guard. |
| 16 | Dismantling centrifugal monoblock pumping set of 02 HP to 05 HP capacity after disconnecting electric supply complete to carry out the repair/replacement of UNSV/worn out spare parts, nuts bolts, washer etc and re-assembling the pump sets on its original position and testing for its proper functioning complete all as specified and directed. Note: Spare parts for repairing and making functional shall be measured and paid separately against respective items. |
| 17 | Supply only bearing DE/NDE for 2 HP to 5 HP pump set. |
| 18 | Supply only impeller CI suitable for 2 HP to 5 HP pump set |
| 19 | Supply only shaft for pump stainless steel. |
| 20 | Supply only shaft sleeves for pumps. |
| 21 | Supply only key for impeller MS. |
| 22 | Supply only vent valve brass. |
| 23 | Supply only mechnical seal |
| 24 | Dismantling the submersible motor from pump set and rewinding the motor with super enameled copper wire as per the existing gauge with necessary insulation, sticks and varnishing, including replacement of shaft bearing 02 Nos and motor terminals plate/cable ducts complete of capacity 3 HP to 10 HP including painting complete all as specified and directed. |
| 25 | Taking down unserviceable of GI column pipe of any size and any type, all fitting complete all as specified and directed. |
| 26 | Supply and Fixing, lowering in replacement of old rusted GI Column Pipe heavy grade of size 65 mm dia flange type with nuts, bolts of both ends in the bore/open wells complete all as specified and directed. |
| 27 | Supply and Fixing lowering in replacement of old rusted GI Column Pipe heavy grade of size 80 mm dia flange type with nuts, bolts of both ends in the bore/open wells complete all as specified and directed. |
| 28 | Taking down unserviceable of HDPE pipe of any size and any type, all fitting complete all as specified and directed |
| 29 | Supply and laying of High density poly- ethylene pipes (HDPE) of pressure rating 8 kgf/cm2 for column pipe to bore well of size 65 mm dia including necessary arrangements for coupling arrangement on top and bottom of HDPE pipe with pump and delivery pipe complete all as specified and directed. |
| 30 | Supply and laying of High density poly- ethylene pipes (HDPE) of pressure rating 8 kgf/cm2 for column pipe to bore well of size 75 mm dia including necessary arrangements for coupling arrangement on top and bottom of HDPE pipe with pump and delivery pipe complete all as specified and directed. |
| 31 | Taking down unserviceable of PVC insulated submersible cable wate proof flate type 3 core with standed copper conductor cable 6/4 sqmm 1100 volts grade including all fitting and joints connection to submersible motor and other end complete as specified and directed. |
| 32 | S&F in replacement of PVC insulated submerssible cable water proof flate type 3 core with standed copper conductor cable, 6 Sqmm, 1100 volts grade including cable lugs/joints, connection to submerssible motor and other end to aluminium armoured cable including jointing complete all as specified and directed. |
| 33 | S&F in replacement of PVC insulated submerssible cable water proof flate type 3 core with standed copper conductor cable, 4 Sqmm, 1100 volts grade including cable lugs/joints, connection to submerssible motor and other end to aluminium armoured cable including jointing complete all as specified and directed. |
| 34 | Taking down unserviceable of Automatic star delta staters in sheet metal enclouser suitable for 5 HP and 10 HP 415 volts 50 Hz complete all as specified and directed. |
| 35 | S&F in repairs Delta starters in sheet metal enclouser suitable for 5 HP capacity, 415V, 50 Hz, complete all as specified and directed. |
| 36 | S&F in repairs Delta starters in sheet metal enclouser suitable for 7.5/10 HP capacity, 415V, 50Hz, complete all as specified and directed. |
| 37 | M & L for making a lorry filling point complete by RCC piller of size 45 cm x 45 cm x 3.5 mtr height with (1:2:4) type B1 using 20 mm graded stone aggregate alongwith Mild steel TMT bars 12 mm dia over cut to length ,bent to shape required ,including cranking ,bending spirally for hooping for columns hooking ends and binding with mild steel wire annealed and 8 mm to 10 mm dia cut to length , bent to shape required in stirrups,spacers and binders and binding with mild steel wire annealed not less than 0.9 mtr dia,or securing with clips,as in pillar,,columns including inserting Tee of 50 mm GI medium grade with 50 mm Gun metal gate valve alongwith suitable size 50 mm GI pipe (upto 3 mtr) medium grade and including hose pipe of 3 Mtr length one side flanged on pipe complete all as specified and as directed. |
| 38 | Taking up / down old DI/GI/PP-R tubing connection including clearing (from trenches) complete all as specified and directed. |
| 39 | 25 mm bore |
| 40 | 32 mm bore |
| 41 | 40 mm bore |
| 42 | 50 mm bore |
| 43 | 100 mm bore |
| 44 | Supply & laying GI tubing 100 mm bore medium grade conforming to IS : 1239 with all fittings laid in trenches / fixing on walls/fixing on pedestals complete all as specified and directed. |
| 45 | Supply & laying GI tubing 50 mm bore medium grade conforming to IS : 1239 with all fittings laid in trenches / fixing on walls/fixing on pedestals complete all as specified and directed. |
| 46 | Supply & laying GI tubing 40 mm bore medium grade conforming to IS : 1239 with all fittings laid in trenches / fixing on walls/fixing on pedestals complete all as specified and directed. |
| 47 | Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 ((PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 50 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 48 | Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 ((PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 40 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 49 | Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 ((PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 32 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 50 | Supply and fixing in replacement of 3-layer PP-R Polypropylene random copolymer concealed piper SDR 7.4 ((PN-16) VU stabilized and antimicrobial dusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings 25 mm outer dia with all fitting laid in trenches or fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 51 | M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 50 mm outer dia 22/19 mm thick with chiken wire mesh wire netting 25 mm gauge, 20 mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed. |
| 52 | M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 40 mm outer dia 22/19mm thick with chiken wire mesh wire netting 25mm gauge, 20 mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed. |
| 53 | M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 32 mm outer dia 22/19mm thick with chiken wire mesh wire netting 25mm gauge, 20 mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed. |
| 54 | M&L for Elestometric Nytral rubber insulation to PP-R pipes suitable for 25mm outer dia 28/19mm thick with chiken wire mesh wire netting 25mm gauge, 20 mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 complete all as specified and directed. |
| 55 | Takind down unserviceable of PP-R gate valve any type and any capacity complete all as specified and directed. |
| 56 | Supply and fixing in replacement of PP-R gate valve (brass insert) for 50 mm outer dia pipe as per requirement of the site complete all as specified and directed. |
| 57 | Supply and fixing in replacement of PP-R ball valve (brass insert) for 25 mm outer dia pipe as per requirement of the site complete all as specified and directed. |
| 58 | Supply and fixing in replacement of PP-R ball valve (brass insert) for 32 mm outer dia pipe as per requirement of the site complete all as specified and directed. |
| 59 | M&L for flushing of borewell complete by using 210 CMF compressor and heavy duty driller machine to deliver the high air pressure at the bottom of the bore well and cleaning/flushing the bore well till the water is become free from any type of mud,dust and clear for portable use complete all as specified and directed. |
| 60 | Supply and fixing in replacement of Submersible pump 5 HP, (8-17) stage, discharge outlet size 50 mm, maximum discharge flow 100-500 LPM ,three phase,3000 rpm, 400V ,Suitable for 200 mm casing pipe complete all as specified and directed. |
| 61 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for laying of water pipe lines/taking out pipe lines and getting out in any type of soil including forming bottom surface to required level and slope complete all as specified and directed. |
| 62 | Returing ,fiiling in including spreading ,leveling ,watering and well ramming in layers not exe. 25 cm thick in soils complete all as specified and as directed. |
| 63 | Removal of surplus soil to a distance not exceeding 50 m and doepositing where directed at a level not exceeding 1.5 m above the strarting point complete all as specified and as directed. |
| 64 | Taking down unserviceable of XLPE insulated, armoured heavey duty electric cables any type and any size complete all as specified and as directed |
| 65 | Supply and Laying of XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 2 core laid in trences or passing through pipes.ducts or fixed to walls/poles complete incl taking down old one incl cable cover complete all as specified and directed. . (Earth work, cable protection and sand cushioning shall be measured and paid for separately) |
| 66 | Supply and laying of XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 3.5 core laid in trences or passing through pipes.ducts or fixed to walls/poles complete incl taking down old one incl cable caver complete all as specified and directed. . (Earth work, cable protection and sand cushioning shall be measured and paid for separately) |
| 67 | Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and directed. |
| 68 | Supply and Laying in Replacement of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x150x40mm , complete all as specified and directed |
| 69 | S&F of electrical water heating system/Hamam of capacity 500 Ltrs with boiler and Glass wool insulation of 25mm thickness to be provided between outer and inner sheet. 100mm dia MS pipes is to be fitted in centre which will act as heater. One direct water connection for inlet of water. Funnel for pouring water manually to be provided. One over flow pipe, 2 outlet of hot water from the boiler to be provided. Inner chamber is to be painted with boiler paint and external steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide incl necessary components like stand for hamam complete all as specified and directed. |
| 70 | Taking down and Servicing of electric water heating system / Hamam of any capacity ( 300 & 500 Ltr) with boiler and glass wool insulation of 25 mm thickness to be provided between outer and innner sheet 100 mm dia MS pipe is to be fitted In center whichwill act as heater complete all as specified and directed. |
| 71 | Taking down,Supply and fixing of water connection inlet pipe 15/20 mm complete all as specified and directed. |
| 72 | M& L of painting with boiler and external steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide inl necessary components like stand for hamam complete all as specified and directed. |
| 73 | Dismantling the Hamam motor from pump set and rewinding the motor with super enameled copper wire as per the existing gauge with necessary insulation, sticks and varnishing, including replacement of shaft bearing 02 Nos and motor terminals plate/cable ducts complete of capacity 0.5 HP to 02 HP including painting complete all as specified and directed. |
| 74 | M&L for subsequent development of bore well by submersible pump set of suitable capacity till clear water of potable quantity free from sand / silt is obtained complete all as specified and directed. Note :- Pump set equipped for testing yield shall be used and submersible pump incl submersible cable, column pipe and other accessories will be arranged by the contractor with out any extra cost. |
| 75 | Supply installation commisioning and testing LT Panel outdoor type feeder pillar box including suitable capacity of aluminium bus bar 440/415 Volts AC, 3 phase 4 wire 50 cycles total enclosed weather proof dust vermin proof MS Sheet iron clad of 3.15 mm thick powder coated complete comprising of the following :-INCOMINGS(a) Change over swith MCCB 4 POLE 415 V 100 A (25 KA) -01 No (adjustable type)(b) MCCB 4 POLE 415 V 63 A (25 KA) -01 No (adjustable type)OUTGOINGS(a) MCCB 4 POLE 415 V 63 A (16 KA) -03 No (adjustable type)(b) Digital type Ammeter including CTs and selector switch - 1 Nos (c) Digital type Voltmeter and selector switches 0 . 500 - 1 No (d) Indicator RYB - 1 Set (e) Aluminium bus bar, 250 Amps rating, 3 Nos for phases and one No for newtral of half capacity - 01 Set |
| 76 | Supply and fix Dosing Pump having adjustable pressure of 0 to 100 PSL 230 Volt 50 HZ 1/30HP out put 2 to 40 Gallon / day including PVC watering tube in required length. make declibac, RMCO Pearl filter complete all as specified and directed. |
| 77 | Supply and fix MS clamp of size 50 mm x 6 mm and 02 foot long for holding of 150 mm dia pipe complete all as specified and directed. |
| 78 | M&L for carrying chemical / bacteriological analysis and portability test of water obtained from bore well from Delhi test house/ MCD/ approved Micro Engineering and testing lab and submitting the report in duplicate to Engr-in-charge, complete all as specified and directed. |
| 79 | Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe up 150 mm dia complete all as specified and directed. |
| 80 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
