|
| 1 | Comprehensive/periodical maintenance of DG Set on quarterly basis including checking, cleaning, adjusting/tightening, oiling, greasing and resetting of existing part decarbonising of battery terminals of DG Set at different location of installation and keep ready to set for proper functioning of valve 'V' belts, pulleys, Fan hub, idler, water pump, filters, engine cylinder head, bolts, nuts and washers vibration dampers, coupling, alternator terminals, carbon brushes, vibration dampers, coupling, alternator terminals, springs, AVR's, exhaust pipes etc of following capacity of DG Sets :-Note:- Spares part shall be measured and paid separately under respective item of Sch A. |
| 2 | (a) 1000 KVA capacity |
| 3 | (b) 600 KVA capacity |
| 4 | (c) 320 KVA capacity |
| 5 | (d) 250 KVA capacity |
| 6 | (e) 100 KVA to 125 KVA capacity |
| 7 | (f) 60 KVA to 82.5 KVA capacity |
| 8 | (g) 40 KVA capacity |
| 9 | (h) 20 to 30 KVA capacity |
| 10 | (j) 4.2 KVA capacity |
| 11 | Opening the nut bolts and taking out the engine head assembly/ FIP / Engine assembly of 20/30 KVA of any make other connected items and taking out u/s item to with transporting the Engine assembly to workshop and return back after repair, assembling the items and testing commissioning to entire satisfaction of suitable make & model complete all as specified & directed. Note:- Items required to be repair are paid seperately |
| 12 | Replacement of following unserviceable parts / items from the engine / alternator of diesel engine driven generating set of 20 KVA to 30 KVA capacity, 4-cyllinder of following items all as specified & directed. Note:- Items required to be paid under supply only |
| 13 | (a) Complete exhaust silencer (absorption type) |
| 14 | (b) Adopter for absorption type silencer |
| 15 | (c) Fuel pipe for feed pump to filter |
| 16 | (d) Fuel pipe for diesel tank to feed pump |
| 17 | (e) Fuel pipe for filter to fuel pump |
| 18 | (f) Banjo bolt with washers for fuel pipe |
| 19 | (g) Oil filter element complete (MICO, BOSCH or equivalent) |
| 20 | (h) Diesel filter elements complete (MICO, BOSCH or equivalent) |
| 21 | (j) Flexible pipe (filter to lub oil cooler) |
| 22 | (k) Exhaust valve |
| 23 | (l) Inlet Valve |
| 24 | (m) Guide head spring |
| 25 | (n) Piston with ring set complete |
| 26 | (o) Packing kit with O ring |
| 27 | (p) Complete radiator suitable for upto 30 KVA DG set |
| 28 | (q) Water lifting pump for 20/30 KVA DG set single phase |
| 29 | (r) Battery Charger for Alternator 12 volts complete. |
| 30 | (s) V belt of suitable size make: Fanner or equivalent as approved by GE. |
| 31 | Opening the nut bolts and taking out the engine head assembly / FIP / Engine assembly of 40 / 62.5 KVA of any make other connected items and taking out u/s item to with transporting the Engine assembly to workshop and return back after repair assembling the items and testing commissioning to entire satisfaction of suitable make & model complete all as specified & directed. Note:- Items required to be repair are paid seperately |
| 32 | Replacement of following unserviceable parts / items from the engine / alternator of diesel engine driven generating set of 40/62.5 KVA capacity, 4-cyllinder of following item all as specified & directed.Note:- Items required to be paid under supply only |
| 33 | (a) Complete exhaust silencer (absorption type) |
| 34 | (b) Adopter for absorption type silencer |
| 35 | (c) Fuel pipe for feed pump to filter |
| 36 | (d) Fuel pipe for diesel tank to feed pump |
| 37 | (e) Fuel pipe for filter to fuel pump |
| 38 | (f) Banjo bolt with washers for fuel pipe |
| 39 | (g) Oil filter element complete (MICO, BOSCH or equivalent) |
| 40 | (h) Diesel filter elements complete (MICO, BOSCH or equivalent) |
| 41 | (j) Flexible pipe (filter to lub oil cooler) |
| 42 | (k) Exhaust valve |
| 43 | (l) Inlet Valve |
| 44 | (m) Guide head spring |
| 45 | (n) Piston with ring set complete |
| 46 | (o) Packing kit with O ring |
| 47 | (p) Complete radiator suitable for upto 62.5 KVA DG set |
| 48 | (q) Water lifting pump for 40/ 62.5KVA DG set single phase |
| 49 | (r) Battery Charger for Alternator 12 volts complete. |
| 50 | (s) V belt of suitable size make: Fanner or equivalent as approved by GE. |
| 51 | Opening the nut bolts and taking out the engine head assembly/ FIP / Engine assembly of 82.5 / 125 KVA of any make other connected items and taking out u/s item to with transporting the Engine assembly to workshop and return back after repair assembling the items and testing commisioning to entire satisfaction of suitable make & model complete all as specified & directed. note Items required to be repair are paid seperately |
| 52 | Replacement of following unserviceable parts / items from the engine / alternator of diesel engine driven generating set of 82.5 / 125 KVA capacity, 4-cyllinder of following item all as specified & directed.Note :Items required to be paid under supply only |
| 53 | (a) Fuel pipe for feed pump to filter |
| 54 | (b) Fuel pipe for diesel tank to feed pump |
| 55 | (c) Fuel pipe for filter to fuel pump |
| 56 | (d) Banjo bolt with washers for fuel pipe |
| 57 | (e) Oil filter element complete (MICO, Bosch or equivalent) |
| 58 | (f) Diesel filter elements complete (MICO, Bosch or equivalent) |
| 59 | (g) Flexible pipe (filter to lub oil cooler) |
| 60 | (h) Exhaust valve |
| 61 | (j) Inlet Valve |
| 62 | (k) Guide head spring |
| 63 | (l) Piston with ring set complete |
| 64 | (m) Packing kit with O ring |
| 65 | (n) Water lifting pump for DG set single phase |
| 66 | (o) Battery Charger for Alternator 12 volts complete make: Lucas /TVS /BOSCH |
| 67 | (p) V belt of suitable size make: Fanner or equivalent as approved by GE. |
| 68 | Opening the nut bolts and taking out the engine head assembly/ FIP / Engine assembly of 320 KVA of any make other connected items and taking out u/s item to with transporting the Engine assembly to workshop and return back after repair assembling the items and testing commisioning to entire satisfaction of suitable make & model complete all as specified & directed.Note: Items required to be repair are paid seperately |
| 69 | Replacement of following unserviceable parts / items from the engine / alternator of diesel engine driven generating set of 320 KVA capacity, 4-cyllinder of following item all as specified & directed.Note :Items required to be paid under supply only |
| 70 | (a) Fuel pipe for feed pump to filter |
| 71 | (b) Fuel pipe for diesel tank to feed pump |
| 72 | (c) Fuel pipe for filter to fuel pump |
| 73 | (d) Banjo bolt with washers for fuel pipe |
| 74 | (e) Oil filter element complete (MICO, Bosch or equivalent) |
| 75 | (f) Diesel filter elements complete (MICO, Bosch or equivalent) |
| 76 | (g) Flexible pipe (filter to lube oil cooler) |
| 77 | (h) Exhaust valve |
| 78 | (j) Inlet valve. |
| 79 | (k) Guide head spring |
| 80 | (l) Packing kit with O ring |
| 81 | (m) Water lifting pump for DG set single phase |
| 82 | (n) Battery Charger for Alternator 12 volts complete make: Lucas /TVS /BOSCH |
| 83 | (o) V belt of suitable size make: Fanner or equivalent as approved by GE. |
| 84 | (p) Hose pipe set complete. |
| 85 | Repair and replacement of complete wiring of existing panel board including replacement of Ammeter, temperature meters, oil pressure gauge and ignition switch complete etc all as directed for 40 KVA to 62.5 KVA DG set |
| 86 | Repair and replacement of complete wiring of existing panel board including replacement of Ameter, temprature meters,oil pressure gauge and ignition switch complete etc all as directed.for 82.5 KVA to 125 KVA DG set |
| 87 | Repair and replacement of complete wiring of existing panel board including replacement of Ameter, temprature meters,oil pressure gauge and ignition switch complete etc all as directed.for 320 KVA DG set . |
| 88 | Supply & Fixing in repair Panel board assembly tray type including complete wiring of existing panel board including replacement of Ameter, temperature meters, oil pressure meter and ignition switch complete etc all as specified & directed for 20 to 30 KVA. |
| 89 | Supply & Fixing in repair Alternator for battery charging 24 volts complete etc all as specified and directed. |
| 90 | Supply & Fixing in repair of blower type (fan blade) for radiator complete of DG set 20 to 30 KVA capacity complete etc all as specified and directed. |
| 91 | Taking down carefully and repairing of Alternator of DG set of 40 KVA capacity and transportation to authorised workshop for rewinding with super enameled copper wire including boosted coil and replacement of bearings / slip rings as per existing size & make including commissioning & testing complete etc all as specified & directed. |
| 92 | Taking down carefully and repairing of Alternator of DG set of 62.5 / 82.5 KVA capacity and transportation to authorised workshop for rewinding with super enameled copper wire including boosted coil and replacement of bearings / slip rings as per existing size & make including commissioning & testing complete etc all as specified & directed. |
| 93 | Taking down carefully and repairing of Alternator of DG set of 20 / 30 KVA capacity of any make and transportation to authorised workshop for rewinding with super enameled copper wire including boosted coil and replacement of bearings / slip rings as per existing size & make including commissioning & testing complete etc all as specified & directed. |
| 94 | Taking out carefully and repairing of fuel injection pump assembly complete from the engines of following capacity of DG sets including maintenance, servicing, replacement of valves, washers etc re-assembling calibration, setting for proper function, refixing and testing complete all as specified & directed:- |
| 95 | (a) 20 /30 KVA capacity |
| 96 | (b) 40 KVA capacity |
| 97 | (c) 62.5 to 82.5 KVA capacity |
| 98 | (d) 100/125 KVA capacity |
| 99 | (e) 320 KVA capacity |
| 100 | (f) 600 KVA capacity |
| 101 | (g) 1000 KVA capacity |
| 102 | Calibration of nozzles (fuel injector) of fuel injection pump assembly complete of following capacity DG sets, setting for proper functioning, refixing and testing complete etc all as specified & directed. |
| 103 | (a) 20/30 KVA capacity |
| 104 | (b) 40 KVA capacity |
| 105 | (c) 62.5 KVA capacity |
| 106 | (d) 82.5 KVA capacity |
| 107 | (e) 100/125 KVA capacity |
| 108 | (f) 320 KVA capacity |
| 109 | (g) 600 KVA capacity |
| 110 | (h) 1000 KVA capacity |
| 111 | Supply & fixing in repair of Brass Nozzle with ring suitable size for fixing complete etc all as required & as directed for 40 to 600 KVA capacity DG SET. |
| 112 | Dismantling & taking out carefully, reparing and removing the alternator / dynamo from the engine of following capacity of DG sets with opening up, cleaning / servicing and replacement of carbon brushes with holder and assembling back, refixing and testing complete etc all as specified & directed. |
| 113 | (a) 40 KVA capacity |
| 114 | (b) 62.5 / 82.5 KVA capacity |
| 115 | (c) 100/125 KVA capacity |
| 116 | (d) 320 KVA capacity |
| 117 | (e) 20/30 KVA capacity |
| 118 | (f) 600 KVA capacity |
| 119 | (g) 1000 KVA capacity |
| 120 | Taking out carefully for repairing the radiator assembly from the engine of following capacity of DG sets by disconnecting of inlet and outlet and over-hauling / servicing the radiator cleaning / removing blockage arresting leakage with necessary welding / brazzing as required and fixing back in its position for testing complete etc all as specified & directed. |
| 121 | (a) 40 KVA capacity |
| 122 | (b) 62.5 /82.5 KVA capacity |
| 123 | (c) 125 KVA capacity |
| 124 | (d) 320 KVA capacity |
| 125 | (e) 20/30 KVA capacity |
| 126 | (f) 600 KVA capacity |
| 127 | (g) 1000 KVA capacity |
| 128 | Dismantling and taking out the necessary connection carefully from MS fuel tank of any size / type of DG set by disconnecting of fuel pipes connections, draining out of fuel from the tank, cleaning & removing sediments, dirt etc from fuel tank and replacement of fuel pipe line with highly transparent PVC flexible threaded pipes of suitable size including painting of outer surface of fuel tank with synthetic enamel paint of one coat after cleaning, scrubbing the surfaces and writing the capacity of fuel tank and marking fuel level position with synthetic enamel paint for the following DG sets:- |
| 129 | (a) 40 KVA capacity |
| 130 | (b) 62.5 KVA capacity |
| 131 | (c) 82.5 KVA capacity |
| 132 | (d) 125 KVA capacity |
| 133 | (e) 320 KVA capacity |
| 134 | (f) 20 / 30 KVA capacity |
| 135 | (g) 600 KVA capacity |
| 136 | (h) 1000 KVA capacity |
| 137 | Repair / maintenance of exhaust system including replacement of exhaust pipe, bracket with clamps, nut bolt and washer, exhaust manifold packing etc of any capcity of DG Set, all as specified and directed by Engr-in-Charge. |
| 138 | Painting of DG Sets of following capacities, comprising Engine, Alternator, LT Panel board as per standard/approved colour code with one coat of synthetic enamel paint after cleaning, scrubbing of all surfaces incl writing SM and MES Number etc all as specified and directed for:- |
| 139 | (a) 1000 KVA capacity |
| 140 | (b) 600 KVA capacity |
| 141 | (c) 320 KVA Capacity |
| 142 | (d) 125 KVA Capacity |
| 143 | (e) 62.5 KVA Capacity |
| 144 | (f) 82.5 KVA Capacity |
| 145 | (g) 40 KVA capacity |
| 146 | (h) 20/30 KVA capacity |
| 147 | S & F in replacement battery cables of following sizes complete etc all as specified and directed. |
| 148 | (a) Copper cable suitable for DG set 1000 KVA |
| 149 | (b) Copper cable suitable for DG set 600 KVA |
| 150 | (c) Copper cable suitable for DG set 320 KVA |
| 151 | (d) Copper cable suitable for DG set 40 to 125 KVA |
| 152 | (e) Copper cable suitable for DG set 20 to 30 KVA |
| 153 | S & F in replacement battery terminal brass heavy duty complete etc all as specified and directed. |
| 154 | Supply & fixing in replacement of self starter motor suitable for 40 KVA to 62.5 KVA DG set 12 Volt DC of same capacity / model / make / type and connection up of make as approved. |
| 155 | Supply & fixing in replacement of self starter motor suitable for 20 KVA to 30 KVA DG set 12 Volt DC of same capacity / model / make / type and connection up of make as approved. |
| 156 | Supply & Fixing in repair neon Indicator lamp for 230 volt, 50 Hz for indication to incoming and out going supply complete all as specified & directed. |
| 157 | Supply & fixing in replacement of MCCB triple pole 200 Amps 36 KA, 415 volts, adjustable type, complete etc all as specified & directed.. |
| 158 | Supply & fixing in replacement of MCCB triple pole 400 Amps 50 KA, 415 volts, adjustable type, complete etc all as specified & directed.. |
| 159 | S&F in repair MCCB triple pole, 160 Amps, ultimate breaking cap 25 KA complete with motor break protection etc all as specified and directed. . |
| 160 | S&F in repair MCCB four pole, 125 Amps, ultimate breaking cap 16 KA complete with motor break protection etc all as specified and directed. . |
| 161 | S&F in repair MCCB four pole, 63 Amps, ultimate breaking cap 16 KA complete with motor break protection etc all as specified and directed. . |
| 162 | S&F in repair MCCB four pole, 400 Amps, ultimate breaking cap 50 KA complete with motor break protection etc all as specified and directed. . |
| 163 | S&F in repair MCCB four pole, 630 Amps, ultimate breaking cap 50 KA complete with motor break protection etc all as specified and directed. . |
| 164 | S & F in replacement over load relay 25 A, 24 Volt and 250 volt and 250 ohms complete etc all as specified and directed. |
| 165 | S & F in replacement digital amp meter size 96 x 96 mm to display 4 digit reading complete etc all as specified and directed. |
| 166 | S & F in replacement digital volt meter size 96 x 96 mm to display 4 digit reading complete etc all as specified and directed. |
| 167 | S & F in repair / replacement of winding exciter assembly for DG Set of any capacity / Make all as manufacturer design including connection and testing complete etc all as specified and directed. |
| 168 | S & F in repair diesel fuel flexible pipe for DG Set of any capacity / Make complete etc all as specified and directed. |
| 169 | S&F in replacement of oil pressure pipe for DG Set of any capacity complete etc all as specified and directed. |
| 170 | S &F in replacement On load changer over switch 4 pole, 160 Amp rating, 415 Volts, with steel enclosure and front handle type including connection lugs and testing complete etc all as specified and directed. |
| 171 | S & F in replacement On load changer over switch 4 pole, 100 Amp rating, 415 Volts, with steel enclosure and front handle type including connection with lugs and testing complete etc all as specified and directed. . |
| 172 | S & F in replacement Manual changer over switch 4 pole, 200 Amp rating, 415 Volts, with steel enclosure and Side handle operated type including connection with Lugs and testing complete etc all as specified and directed. . |
| 173 | S & F in replacement Manual changer over switch 4 pole, 250 Amp rating, 415 Volts, with steel enclosure and Side handle operated type including connection with Lugs and testing complete etc all as specified and directed. . |
| 174 | S & F in replacement Manual changer over switch 4 pole, 1000 Amp rating, 415 Volts, with steel enclosure and Side handle operated type including connection with Lugs and testing complete with fixing the clamps and necessry nut bolts etc all as specified and directed. . |
| 175 | Supply, laying or fixing or passing through pipe commissioning and testing of PVC / XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade of the following cross section area including suitable size lugs including taking out /dismantling of existing cable. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items:- |
| 176 | (a) 240 Sqmm 3.5 core |
| 177 | (b) 95 Sqmm 3.5 core |
| 178 | (c) 25 sqmm 4 core |
| 179 | (d) 16 sqmm 4 core |
| 180 | Replacement of old/UNSV Engine oil 20W 40, multi grade 2904C servo super for DG sets all type complete etc all as specified and directed. |
| 181 | Supply and filling coolant for radiator in suitable container capacity complete etc all as specified and directed. |
| 182 | Supply and filling distilled water in suitable container capacity complete etc all as specified and directed. |
| 183 | S & F in replacement of electric shock treatment chart coloured of size approximately 3 ft x 2 ft & 6 mm thick plywood with teak wood frame including covered with plastic laminated sheet complete etc all as specified and directed. |
| 184 | S & F in replacement of machinery maintenance chart coloured of size approximately 3 ft x 2 ft & 6 mm thick plywood with teak wood frame including covered with plastic laminated sheet complete etc all as specified and directed. |
| 185 | Repairing of electrical ON LOAD AMF panel of DG set of Capacity up to 20/30 KVA with repairing and replacement of minor parts of contractor, coil, timmer or other parts to smooth fuctioning of panel etc all as required and directed at site |
| 186 | Repairing of electrical ON LOAD AMF panel of DG set of Capacity up to 82.5/ 125 KVA with repairing and replacement of minor parts of contractor, coil, timmer or other parts to smooth fuctioning of panel etc all as required and directed at site |
| 187 | Repairing of electrical ON LOAD AMF panel of DG set of Capacity 320 KVA with repairing and replacement of minor parts of contractor, coil, timmer or other parts to smooth fuctioning of panel etc all as required and directed at site |
| 188 | Dismantling / taking down of unserviceable turbo charger from following DG sets and transportation to authorised workshop of respective make / brand for repair / maintenance / balancing including replacement of required parts and make the same serviceable / functional complete etc all as specified & directed.(a) 40 KVA to 62.5 KVA Capacity |
| 189 | Supply & Fixing in repair shut down valve assembly complete of following DG sets. |
| 190 | (a) 40 KVA to 62.5 KVA capacity |
| 191 | (b) 320 KVA to 1000 KVA capacity |
| 192 | Taking out / disconnecting alternator of 320 KVA DG set Installed at MH Jabalpur and transportation to authorised workshop for repair / re-winding / replacing unserviceable parts and re assembling the same after repairing including varnishing, testing and re-alignment complete etc all as specified & directed. |
| 193 | Supply & Fixing in replacement of coupling hub of alternator of existing size and make of capacity 82.5/125 KVA DG set complete etc all as specified & directed. |
| 194 | Supply & Fixing in replacement of coupling hub of alternator of existing size and make of capacity 20/30 KVA DG set complete etc all as specified & directed. |
| 195 | Supply & Fixing in repair of maintenance free starting battery 12 volts, 88 AH etc all as specified and directed MAKE : EXIDE/ AMARON / LUCAS |
| 196 | Supply & Fixing in repair of maintenance free starting battery 12 volts,150 AH etc all as specified and directed MAKE : EXIDE/ AMARON / LUCAS |
| 197 | Supply & Fixing in repair of maintenance free starting battery 12 volts,180 AH etc all as specified and directed MAKE : EXIDE/ AMARON / LUCAS |
| 198 | Repair / maintenance of battery charger of existing capacity 6 to 24 volts DC including replacement of unserviceable parts such as diodes, rotory switches, transformers etc of the same make & model complete etc all as directed. |
| 199 | Supply & Fixing in repair of hose pipe set complete with clamps of following DG sets:- |
| 200 | (a) 40 KVA capacity |
| 201 | (b) 62.5 KVA capacity |
| 202 | (c) 82.5 KVA capacity |
| 203 | (d) 125 KVA capacity |
| 204 | (e) 320 KVA capacity |
| 205 | (f) 600 KVA capacity |
| 206 | (g) 1000 KVA capacity |
| 207 | (h) 20/30 KVA capacity |
| 208 | Supply & fixing in repair Automatic voltage Regulator suitable for 1000 KVA DG Set complete etc all as specified & directed by Engineer-in-Charge. |
| 209 | Supply & fixing in repair Automatic voltage Regulator suitable for 600 KVA DG Set complete etc all as specified & directed by Engineer-in-Charge. |
| 210 | Supply & fixing in repair Automatic voltage Regulator suitable for 320 KVA DG Set complete etc all as specified & directed by Engineer-in-Charge. |
| 211 | Supply & fixing in repair Automatic voltage Regulator suitable for 125 KVA DG Set complete etc all as specified & directed by Engineer-in-Charge. |
| 212 | Supply & fixing in repair Automatic voltage Regulator suitable for 82.5/62.5 KVA DG Set complete etc all as specified & directed by Engineer-in-Charge. |
| 213 | Supply & fixing in repair Automatic voltage Regulator suitable for 40 KVA & 62.5 KVA DG Set complete etc all as specified & directed by Engineer-in-Charge. |
| 214 | Supply & fixing in repair self starter, opening and repair to commutator replacement of carbon brush rewinding of stator coil and fixing self starter for 320 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 215 | Supply & fixing in repair self starter, opening and repair to commutator replacement of carbon brush rewinding of stator coil and fixing self starter for 600 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 216 | Supply & fixing in repair self starter, opening and repair to commutator replacement of carbon brush rewinding of stator coil and fixing self starter for 1000 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 217 | Supply & fixing in repair self starter, opening and repair to commutator replacement of carbon brush rewinding of stator coil and fixing self starter for 20 / 30 / 40 / 62.5 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 218 | Supply & fixing in repair self starter, opening and repair to commutator replacement of carbon brush rewinding of stator coil and fixing self starter for 82.5 / 125 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 219 | Supply & fixing in repair thermostat assembly for 600/1000 KVA DG Sets complete all as specified & directed by Engr-in-Charge |
| 220 | Supply & fixing in repair thermostat assembly for 320/125/82.5/62.5 KVA DG Sets complete all as specified & directed by Engr-in-Charge |
| 221 | Supply & fixing in repair super by pass filter for 1000 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 222 | Supply & fixing in repair super by pass filter for 600 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 223 | Supply & fixing in repair super by pass filter for 320 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 224 | Supply & fixing in repair super by pass filter for 20 to 125 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 225 | Taking out old asbestos rope from exhaust silencer system, cleaning silencer pipe exhaust system wrapping up new asbestos rope on exhaust silencer system applying plaster of paris on complete exhaust system upto 125 KVA DG Set complete etc all as specified & directed by Engr-in-Charge |
| 226 | Taking out radiator assembly from the engine base frame for cleaning all chocked tubes of water cooler radiator assembly by applying suitable chemical for cleaning of chocked tubes & re-assembling after cleaning or brazing of tubes if required for 600/1000 KVA capacity complete etc all as specified & directed by Engr-in-Charge |
| 227 | S & F in repair of digital display panel board of AMF PANEL with complete connecting accessories for Capacity 62.5 to 125 KVA Dg set all as specified and directed. |
| 228 | S & F in repair of power Contactor ML5/6 of L&T or equivalent stemford for Incoming/outgoing of AMF panel with complete accessories for capacity 125 to 320 KVA DG set of existing size complete and all as specified and directed. |
| 229 | Replacement of following unserviceable parts / items from the engine / alternator of diesel engine driven generating set of 1000/600/320 KVA capacity, 4-cyllinder of following item all as specified & directed.Note :Items required to be paid under supply only |
| 230 | (a) Oil filter element complete (MICO, Bosch or equivalent) |
| 231 | (b) Diesel filter element complete (MICO, Bosch or equivalent) |
| 232 | Opening the Cam shaft with connected nut bolts and remetaling and grinding and necessary lathe work for smooth functioning of any capacity of DG set, complete all as required and directed at site |
| 233 | Taking out the crank shaft assembly from DG set shifting to Workshop and return back and remetaling and necessary lathe work for any capacity all as required and directed |
| 234 | Opening the shadow less light ceiling mounted /movable with repair and replacement of lamps 12 volts-4 nos of suitable existing capacity and fixing and repair to minor part if required all as required and directed at site |
| 235 | S & F in replacement the insulating rubber mat 2x1 mtr, 19 mm thick, suitable for electrical supply laid at various installations complete etc all as required and directed at site |
| 236 | Opening the water assembly from DG set and taking out and repair to water pump with replacement of water seal, other related part and making good the water assembly complete of any capacity with fixing etc all as required and directed at site |
| 237 | Supply and fixing in replacement of PVC insulated, copper conductor 1100 volts cable of size 25sqmm, single core, unarmoured with suitable size copper lugs complete all as specifed and directed. |
| 238 | M&L for excavation in trenches for laying of under ground cable, errection of poles and stays in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out in hard/dense soil complete all as specified and directed by Engr–in–charge. |
| 239 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all specified and as directed. |
| 240 | Removing surplus excavated material to a distance not exceeding 50meter above the starting point complete etc all as specified and directed by Engr-in-Charge. |
| 241 | S & F in repair door hinges (Right/Left handle) of suitable size for existing DG Set of any capacity complete all as specified and directed. |
| 242 | S & F in Replacement of Line Voltage Monitors (LVMS) of existing make of DG set of 100 KVA to 250 KVA capacity listed parameters including testing, complete all as specified and directed by Engr-in-Charge. |
| 243 | S & F in Replacement of Line Voltage Monitors (LVMS) of existing make of DG set capacity up to100 KVA capacity listed parameters including testing, complete all as specified and directed by Engr-in-Charge. |
| 244 | Overhauling of Turbo Charger Assembly duly disconnecting the mechanical and electrical connections of DG sets capacity upto 1000 KVA, opening and thoroughly checking to carry out repairs complete to the Turbo Charger Kit and spares as required at site including any mechanical and reassembling and refixing the same after repair to its original position and reconnecting the same including testing, complete all as specified and directed by Engr-in-Charge. |
| 245 | Earthing complete with GI earth plate electrode 60cm x 60cm x 3mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Aluminium earth strip 32 x 6mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe medium grade 40mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion, complete all as specified and directed by Engr-in-Charge. Note:- Item of earthing includes cost of 7.5m long aluminium strip of 32 x 6mm size and protection pipe of 40 mm bore GI medium. |
| 246 | S & F in Replacement of controller display suitable to DG set controls/commands of 10 KVA to 62.5 KVA capacity with all listed parameters as per OEM recommendation including testing, complete all as specified |
| 247 | S & F in Replacement of controller display suitable to DG set controls/commands of 100 KVA to 250 KVA capacity with all listed parameters as per OEM recommendation including testing, complete all as specified |
| 248 | S & F in Replacement of controller display suitable to DG set controls/commands of 320 KVA to 1000 KVA capacity with all listed parameters as per OEM recommendation including testing, complete all as specified |
| 249 | S & F in Replacement of microprocessor based control unit suitable to DG set controls/commands of up to 160 KVA capacity with all listed parameters as per recomendation including testing, complete all as specified and directed by Engr-in-Charge. |
| 250 | S & F in Replacement of microprocessor based control unit suitable to DG set controls/commands of capacity 250 to 1000 KVA capacity with all listed parameters as per recommendation including testing, complete all as specified and directed by Engr-in-Charge. |
| 251 | S & F in Replacement of Actuator suitable to DG set controls/commands of 10 KVA to 160 KVA capacity with all listed parameters as per OEM recommendation including testing, complete all as specified and directed by Engr-in-Charge. |
| 252 | S & F in Replacement of Actuator suitable to DG set controls/commands of 250 KVA to 1000 KVA capacity with all listed parameters as per OEM recommendation including testing, complete all as specified and directed by Engr-in-Charge. |
| 253 | Supply and mounting AVM (anti vibration) pads for Engine, radiator and alternator of DG set of any capacity including labour charges for proper mounting and all necessary misc accessories complete all as specified and directed by Engr-in-Charge |
| 254 | Supply and fix fuel tank lock and key suitable for existing DG set including removing old un serviceable one, complete all as specified and directed by Engr-in-Charge. |
| 255 | Supply and fix Door lock and key with door rod assy in side the door suitable for existing DG set including removing old un serviceable one, complete all as specified and directed by Engr-in-Charge. |
| 256 | S & F in replacemnt of voltage monitoring relay for existing DG set AMF panel of capacity up to 250 KVA including removing old un seviceable one, complete all as specified and directed by Engr-in-Charge. |
| 257 | S & F in replacement of voltage monitoring relay for existing DG set AMF panel of capacity 320 to 1000 KVA including removing old un serviceable one, complete all as specified and directed by Engr-in-Charge. |
| 258 | Taking down the U/S primary diesel feeder pump assy from DG set Supply, install, test & commissioning of primary diesel feeder pump assy inclusive of all spare and parts system for following DG set, complete all as specified and directed by Engr-in-Charge.Note :- Calibration shall be performed before erection of pump.(a) 10 KVA to 160 KVA |
| 259 | Taking down the U/S primary diesel feeder pump assy from DG set Supply, install, test & commissioning of primary diesel feeder pump assy inclusive of all spare and parts system for following DG set, complete all as specified and directed by Engr-in-Charge.Note :- Calibration shall be performed before erection of pump.(a) 250 KVA to 1000 KVA |
| 260 | S & F in repair Shutdown coil suitable for DG Set up to 320 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 261 | S & F in repair Conversion Kit for DG Set up to 320 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 262 | S & F in repair Magnetic Pickup suitable for DG Set up to 320 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 263 | S & F in repair Relay Card DG Set up to 320 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 264 | S & F in repair Control Card DG Set up to 320 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 265 | S & F in repair Solonoid coil suitable for DG Set 250 to 320 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 266 | S & F in repair Solonoid coil suitable for DG Set upto 125 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 267 | M & L Taking down water pump assembly of DG sets upto125 KVA capacity from its existing position, opening into parts, overhauling the same at workshop with replacement of water pump repair kit, ball bearing (1No) (Make SKF/NBC), gasket seal, oil seal and re-assembling and re-fixing on the base including to and fro conveyance charge from site to workshop and back, complete all as specified and directed by Engr-in-Charge. |
| 268 | Description all as per item No 14.00 here-in-before but water pump assembly of DG sets 250 to 320 KVA capacity, complete all as specified and directed by Engr-in-Charge. |
| 269 | S & F in repair Power start controller suitable for DG set upto 125 KVA capacity with all engine safety system both manual and auto start, reset functions with suitable oil pressure sensor, high water temperature safety, over speed regulator safety, earth fault safety, low and high AC voltage safety, internal wiring including taking down old unserviceable power start controller, complete all as specified and directed by Engr-in-Charge. |
| 270 | S & F in repair Power start controller suitable for DG set 160-320 KVA capacity with all engine safety system both mannual and auto start, reset functions with suitable oil pressure sensor, high water temperature safety, over speed regulator safety, earth fault safety, low and high AC voltage safety, internal wiring including taking down old unserviceable power start controller, complete all as specified and directed by Engr-in-Charge. |
| 271 | S & F in replacement Residential type silencer suitable for 250 to 320 KVA capacity DG Set as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 272 | S & F in replacement Water temperature gauge as per existing type and make, complete all as specified and directed by Engr-in-Charge. |
| 273 | S & F in replacement Oil temperature gauge as per existing type and make, complete all as specified and directed by Engr-in-Charge. |
| 274 | S & F in replacement Exhaust bellow as per existing type and make, complete all as specified and directed by Engr-in-Charge. |
| 275 | S & F in replacement Radiator cap as per existing type and make, complete all as specified and directed by Engr-in-Charge. |
| 276 | S & F in replacement MPU Sensor suitable for DG Set up to 320 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 277 | S & F in replacement PT 1000 Sensor suitable for DG Set up to 320 KVA capacity as per existing type and model, complete all as specified and directed by Engr-in-Charge. |
| 278 | Schedule of credit amount of Rs 2248536.00 to be deducted during AOC Please Enable Macros to View BoQ information |
