|
| 1 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 depth for foundations etc and getting out hard / dense soil complete all as specified and as directed. |
| 2 | M&L cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in fdn and mass concrete complete all as specifed and directed. |
| 3 | M&L for old size Brick work with fly ash, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed. |
| 4 | M&L for Plain cement concrete type B1 1:2:4 ( using 20 mm graded granite stone aggregate) Copings, bed plates and the like including weathering, slightly surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed. |
| 5 | M&L for 15 mm thick rendering on Brick masonray surfaces in cm 1:4 including fair faces complete all as specified and as directed. |
| 6 | Returing, filling in including spreading, levelling , watering and well ramming in layers n exc 25 cm thick with hard/dense soil complete all as specified and as directed. |
| 7 | Removing of excavated material exc 50 m but n exc 250m and depositing where directed complete all as specified and as directed. |
| 8 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms molds, mitered/stopped ends etc complete all as specified and as directed. |
| 9 | M&L for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slabs etc set in cement mortar (1:4) including use and waste of form work & placing on drains complete directed |
| 10 | M&L for Mild steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binderscut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia Complete all as specified and as directed. |
| 11 | M&L for P.C.C 1:2:4 type B1 (using 20 mm graded stone aggregate) as in surface channels and drain, complete all as specified and as directed. |
| 12 | M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 200mm bore including packing under and haunching against the sides of pipe after they are laid complete all as specified and as directed. |
| 13 | M&L for Reinforcement concrete pipes, class NP-2 laid and jointed complete with collars for 300 mm bore dia of pipe complete all as specified and as directed. |
| 14 | S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed. |
| 15 | Excavation over area exc 10 Sqm on plan and n. exc. 1.5 m depth and getting out in hard/dense soil complete all as specified and directed. |
| 16 | Excavation over area exc 10 Sqm on plan and exc. 1.5 m but n. exc 3.0 m depth and getting out in hard/dense soil complete all as specified and directed. |
| 17 | Excavation over area exc 10 Sqm on plan and exc. 3.0 m but n. exc 4.5.0 m depth and getting out in hard/dense soil complete all as specified and directed. |
| 18 | M&L cement concrete 1:4:8 type D2 (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed. |
| 19 | M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 20 | M&L for providing reinforcement cement concrete M-25 (Design Mix) in slabs supported on walls, beams, column, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed. |
| 21 | M&L mild steel TMT steel bars in reinforcement 10mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 22 | M&L formwork to flat soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200 mm thick (horizontal/slopping) complete all as specified and as directed. |
| 23 | M&L for boring for Bored cast in situ piles 16 meters in soil and getting out and disposal of spoil to a distance 50 mtr using DMC method (Direct mud calculation) 350 mm dia complete all as specified and as directed. |
| 24 | M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed. |
| 25 | M&L for 100 mm th gravel filling under floor or in foundations including watering and consolidation complete all as specified and as directed. |
| 26 | M&L for Loose filling with (broken stone/boulders) of gauge 40 to 80 mm in diposited, spred, and levelled in layers, watered and rammed to a true surface complete all as specified and as directed. |
| 27 | M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level with borken bricks complete all as specified and as directed. |
| 28 | S&F 200 mm dia bore PVC casing pipe complete all as specified and as directed. |
| 29 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for anging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 30 | M&L for Mild steel, plain, black sheet 1 mm th in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 31 | M&L for Moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 32 | M&L for preparation of newly steel surface apply two coat of synthetic enamel paints over a coat of red oxide zink crome complete all as specified and as directed. Please Enable Macros to View BoQ information |
