|
| 1 | Dismantling of all defective spares and cutting of all damaged wire from MCC panel and cleaning panel cabinet properly by company provided technician. |
| 2 | Supply and delivry of the following materials at site as per sample (Make: as per approved vendor list):- |
| 3 | 50HP SDS - 2NOS COMPRISING OF: |
| 4 | Power contactor, 80A 3p 230v ac coil (for main & delta) (Make-ABB) |
| 5 | \\"No\\" contact for above 80 acontactor |
| 6 | \\"Nc\\" contact for above 80a contactor |
| 7 | Power contactor, 3p 230v ac coil (for star) (Make-ABB) |
| 8 | Power contactor, 3p 230v ac coil (for capacitor) |
| 9 | Star-delta timer 3-30sec. |
| 10 | On-delay timer 0.3sec.-30hrs. |
| 11 | Indicating lamps led type (r-2,g-2,a-2) |
| 12 | Push button with 1no element (green) |
| 13 | Push button with 1nc element (red) |
| 14 | Digital motor protection relay (bocr-3d m2) |
| 15 | Under voltage/over voltage/spp monitoring relay |
| 16 | Capacitor normal duty,415v ac |
| 17 | Power terminal 3 way |
| 18 | 5HP DOL (SUBMERSIBLE MOTOR) -5NOS. COMPRISING OF: |
| 19 | 3p power contactor 240v ac coil with no contact(Make-ABB) |
| 20 | \\"No\\" contact block for above contactor |
| 21 | \\"Nc\\" contact block for above contactor |
| 22 | Microprocessor based motor protection relay |
| 23 | Sp mcb for control |
| 24 | Indicating lamps led type (r-3,g-3,a-3) |
| 25 | Push button with 1no element (green) |
| 26 | Push button with 1nc element (red) |
| 27 | Under voltage/over voltage/spp monitoring relay |
| 28 | Power terminal 3 way 150A |
| 29 | 1.0 sq. Mm. Wire (frls) |
| 30 | 1.5 sq. Mm. Wire (frls) |
| 31 | 2.5 sq. Mm. Wire (frls) |
| 32 | 16 sq. Mm. Wire (frls) |
| 33 | 25 sq. Mm. Wire (frls) |
| 34 | 35 sq. Mm. Wire (frls) |
| 35 | Necessary hardware like Pin,fork,ring socket,ferrule spiral,cable tie,pvc tape mcb channel cable tie 100 mm.cable ducts nut,bolts,washers etc. |
| 36 | Fittting fixing of old serviceable materials and above supplied spares of item no 1,2&3 at individual motor feeder and Power line connection with prper socket and tightening all nut & bolts cleaning CT, bus bars with CRC and testing checking all feeders with load properly as per direction. |
| 37 | Add: 18% GST |
| 38 | Add: 1% Cess Please Enable Macros to View BoQ information |
