|
| 1 | DSR Item No. 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 2 | Group C |
| 3 | DSR item No.1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 4 | DSR item No.1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 5 | DSR item No.9.2.4 Brush Less Direct Current (BLDC) Fan without RemoteSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, (As per Complete Item No.7 of the DNIT) |
| 6 | 1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) |
| 7 | DSR item No.1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 8 | 5/6 amps switch |
| 9 | 3 Pin 5/6 A. socket outlet |
| 10 | 15/16 amps switch |
| 11 | 6 Pin 15/16 A. socket outlet |
| 12 | DSR Item No. 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 13 | 25 mm |
| 14 | DSR Item No 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 15 | 3 x 1.5 sq. mm |
| 16 | 3 x 2.5 sq. mm |
| 17 | DSR Item No. 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 18 | DSR item No.1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 19 | 6 Module (200 mmX75 mm) |
| 20 | 8 Module (125 mmX125 mm) |
| 21 | 12 Module (200 mmX150 mm) |
| 22 | DSR item No.1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 23 | DSR Item No. 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required. |
| 24 | Group C |
| 25 | DSR item no. 8.6.10 LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 12 of the DNIT). |
| 26 | 36 watt |
| 27 | DSR item no. 8.7.10LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 13 of the DNIT). |
| 28 | 36 watt |
| 29 | DSR item no.8.16.6 LEDFlood powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt) Supplying, installation, Testing &Commissioning of Flood Light, powdercoatedpressuredie cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 14 of the DNIT) |
| 30 | 250 Watt |
| 31 | Supply & Erection of 3 mm thick white glazed bakelite sheet on existing M.S. box. The job includes the cost of sheet and making holes & cutting and fixing with screws as required to complete the job. The Bakelite sheet should be of make Super Hylam / Formica / GreenLam make only. |
| 32 | Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (As per Complete Item No. 16 of the DNIT). |
| 33 | Size 15” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make EXHD 380-6-1/ Bajaj make Supreme PLUS/ Usha make Turbo HDEF only. |
| 34 | Supply and erection of 14 GMS sheet frame of suitable size for erection of exhaust fan. The hole should be suitable required size for exhaust fan shall be cut from the Centre of the sheet duly fixed on existing M.S. glazing/ ventilator. (As per Complete Item No. 17 of the DNIT) |
| 35 | Suitable for 12” / 15” / 18” Exhaust Fan. |
| 36 | DSR item No.8.1.2LED Down lighter (SMD Type) (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 18 of the DNIT). |
| 37 | 8 - 10 watt |
| 38 | DSR item No.8.2.2LED Down lighter (SMD Type) (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 19 of the DNIT). |
| 39 | 8 - 10 watt |
| 40 | Supply & erection of fresh air fan high speed motor with copper wound 10” sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of Havells make Ventiliar DX White / Orient make Ventilator / Crompton make Brisk Air/ Bajaj make 70049 250mm sweep only. (As per Complete Item No. 20 of the DNIT). |
| 41 | Supply & erection of Cabin Fan 16” sweep (metal body) oscillating type complete with aluminium blades & regulator. The fan should have regulator switch for speed regulation. The fan should be of Havells make V3/ Crompton make Strom2/ Orient make Tornado-II only. (As per Complete Item No. 21 of the DNIT). |
| 42 | Supply and Erection of fan hook for erection of ceiling fan. The hook shall be made out of ½” dia M.S. bar in ‘U’ shape formation. It shall be fixed after chasing the RCC Slab and making necessary repair, plastering to site in original position. The job includes the labour & petty material reqd. to complete the job. |
| 43 | S/I/T/C of linear suspended luminaire 4 ft. long made up of extruded aluminium with PMMA diffuser for standalone and seamless end to end connectivity. (As per Complete Item No. 23 of the DNIT) Please Enable Macros to View BoQ information |
