|
| 1 | SH:I-Boundary Wall=724.00 Mtrs. |
| 2 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 3 | Providing and laying with stone / boulder of size 100mm in foundations and plinth i/c filling with fine sand in voids and ramming compacting cansolidating watering etc. a) foundations and plinth |
| 4 | Providing and laying foundations and plinth Cement concrete 1:4:8 (1 cement 4 Coarse sand 8 graded stone aggregate 40 mm Nominal size ) exclluding the cote of cost cntring and shuttering a) foundation and Plinth |
| 5 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost ofcentring and shuttering. |
| 6 | Providing and laying up to floor two level cement 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) including centring shuttering in :b) String courses, copings, bed plates, anchor blocks, plain window sills and the like. |
| 7 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 8 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 9 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 10 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete |
| 11 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 12 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 13 | e) Column, pillars, posts and struts etc. |
| 14 | Reinforcement of RCC work including bending, binding and placing in position complete. a) Mild steel |
| 15 | Halfbrickmasonry(withbestavailablelocalbricks) incementmortar1:4(1cement :4 coarse sand) in foundation and plinth. |
| 16 | 12 mm cement plaster 1 : 6 (1 cement : 6 fine sand). |
| 17 | 15mmcementplaster1:6(1cement :6finesand)ontheroughsideofsingleorhalf brick wall |
| 18 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 19 | ProvidingandfixingMSgrillsof requiredpatterninwoodenframesofwindowsetcwith MS flat, square or round bars with round headed bolts and nuts or by screws. a) Plain grill |
| 20 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. Please Enable Macros to View BoQ information |
