|
| 1 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge (DSR No.14.76) |
| 2 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge. (DSR No.14.82) |
| 3 | Dismantling doors, windows and clerestory windows (steel of wood) shutter including chowkhats, architrave, holdfasts etc., complete and stacking within 50 meters lead: of area 3 Sq. meter and below. DSR 15.12.1 |
| 4 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists (DSR No.15.17.1) |
| 5 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats (DSR No.15.17.2) |
| 6 | Dismantling existing wall tiles and floor tiles with cement motor including stacking of serviceable materials and disposal of unserviceable material upto a lead of 50 meters (NSI) |
| 7 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR No. 15.25) |
| 8 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR No. 15.26) |
| 9 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead.(DSR No. 15.27) |
| 10 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore (DSR No. 15.44.1) |
| 11 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR No. 15.52) |
| 12 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR No. 15.56) |
| 13 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR No. 15.60) |
| 14 | Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : Rectangular manhole 90x80 cm and 45 cm deep (DSR No. 19.24.1) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR No. 6.1.1) |
| 16 | 12 mm cement plaster finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 coarse sand) complete in all respect (DSR No. 13.7.2) |
| 17 | Cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost nosing of steps stc., complete 40 mm thick with 20mm nominal size stone aggregate as per DSR 11.3.1 |
| 18 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter DSR 19.21.1 |
| 19 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91 |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 21 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. Complete in all respect DSR 13.41.1 |
| 22 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface DSR 13.111 |
| 23 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : DSR 18.11 |
| 24 | 15 mm dia nominal bore DSR 18.11.1 |
| 25 | 20 mm dia nominal vbore DSR 18.11.2 |
| 26 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 27 | 15 mm nominal bore DSR 18.46.1 |
| 28 | 20 mm nominal bore DSR 18.46.2 |
| 29 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms DSR 18.62.1 |
| 30 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 15 mm nominal bore, weighing not less than 32 gms DSR 18.75.1 |
| 31 | Cutting holes up to 30x30 cm in walls including making good the same with F.P.S. bricks complete in all respect. DSR 18.76.1 |
| 32 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the samematerials with snap fittings of approved quality and colour, weighing not lessthan 105 gms DSR 17.71 |
| 33 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors DSR 17.60 |
| 34 | 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729 DSR 17.60.1 |
| 35 | Providing and fixing UPVC Pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia complete with UPVC. fittings and clamps, i/c making good the walls etc. concealed pipe, including, cutting chases and making good the wall : B NSI |
| 36 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia DSR 17.61.1 |
| 37 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size tile 300mm X 600mm of approved make, in all colours, as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. NSI |
| 38 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. DSR 11.56.1 |
| 39 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.DSR 8.5 |
| 40 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work DSR 8.3.2 |
| 41 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR 11.41.2 |
| 42 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. DSR 17.23 |
| 43 | Providing and fixing in position best India make looking mirror 5mm thick including the cost of PVC beeding all around, water proof PVC sheet/ 6 mm thick hard board fixed to wooden cleats with CP brass screws & washers. Make Modi/saint Gobain/Tata.NSI |
| 44 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.DSR 17.78 |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid DSR 17.2.1 |
| 46 | Providing and fixing 100 mm sand cast Iron grating for gully trap. DSR 17.29 |
| 47 | Providing and fixing white chinaware star color under counter wash hand basin size 56 cm x 43 cm Hindware (Model 10049),parry ware ,Cera etc. as per instruction of EIC including the cost o wiking make CP 32 mm waste chain type adjustable hole mixer, including the cost of cutting granite for WHB and making hole in granite for fixing mixer plugs ,screws ,white cement complete in all respects.NSI |
| 48 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.1 |
| 49 | Providing and fixing aluminum handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm DSR 9.100.1 |
| 50 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm DSR 9.97.2 |
| 51 | Providing and fixing aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm DSR 9.96.2 |
| 52 | Providing and fixing 8 mm dia C.P./S.S Jet with flexible tube upto 1 metre long with S.S, triangular plate to European type W.C DSR 17.16.A |
| 53 | Providing and fixing grab rail of stainless steel pipe 1- 1/4\\" and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of Engineer-in-charge NSI |
| 54 | Providing and fixing Urinal Partition 10mm thick Toughned Glass frosted both sides of size 3 x1.5 fixed in postion with clamps holding the glass. All exposed edges to be grinded with smooth finish to the entire scarification of Engineer-in-Charge including carriage of material to site of work. NSI |
| 55 | Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350mm without white PVC automatic flushing cistern but with fitting, standard size C.P. brass flush pipe, speaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556 C.I. trap with outlet grating and other coupling in C.P brass including painting of fitting complete in all respect. DSR 17.5 |
| 56 | Single half stall urinal with 5 litrer PVC automatic flushing cistern DSR 17.5.1 |
| 57 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.DSR 9.141 |
| 58 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of EIC. Decorative finish (wood grained finish) DSR 9.142.2 |
| 59 | Providing and fixing of exhaust fan size 300mm sweep of Crompton, Havells or Usha make, etc. including cost of wiring and switches complete in all rspects.NSI |
| 60 | Providing & replacement of ceiling fan fitting including wring,testing commissioning as per site complete in all respect NSI |
| 61 | Providing and fixing concealed type fitting in walls inc. the cost of CFL 32W Lamp, Box, fitting complete in all respects of make Philips,Wipro, etc. NSI |
| 62 | Providing & Replacement of tube light 36 watt make crompton/Hawells/philips etc fitting including cost of chock,tube rod, proper wire complete in all respect NSI |
| 63 | Providing and fixing of 50 watt LED outdoor flood light white focus water proof to 240 volt 4000 lurners complete in all respects to the entire satisfacation of EIC. Make Havells. NSI |
| 64 | Repair of electrical wiring of toilet blocks including cost of replacement of defective switch & sockets, wiring etc. complete in all respects. NSI |
| 65 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 66 | Providing and fixing of PVC waste pipe for wash basin and urinal pots including cost of PVC waste fitting etc. complete in all respects.NSI |
| 67 | Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore. DSR 18.53.1 |
| 68 | Providing and fixing CP brass bib cock of approved quality conforming to IS:8931. 51 mm nominal bore. DSR 18.49.1 |
| 69 | Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), within 50 meters lead.DSR 14.13 |
| 70 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase. 12.21.1 |
| 71 | Providing and fixing sanitary napkin vending machine at ladies side with 50 refills far as per norms of MOUD for best toilets. Complete in all respect including the cost of equipments, Incinerator, battery for sanitary napkin machine AVM, taxes, Delivery charges ,installation charges, Training charges and warranty.NSI |
| 72 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece 10.5.2 |
| 73 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B: Fixing with adjustable lugs with split end tail to each jamb 10.14.1 |
| 74 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :DSR 9.62 |
| 75 | 250x16 mm DSR 9.62.2 |
| 76 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 77 | 250x10 mm DSR 9.63.1 |
| 78 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 79 | 125 mm DSR 9.66.1 |
| 80 | Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete |
| 81 | 100x75x3.50 mm DSR 9.56.2 |
| 82 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick DSR 11.26.1 |
| 83 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitered and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 10.31 |
| 84 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2 |
| 85 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 |
| 86 | Repair of wooden doors and window with fixtures including cutting, jointing and other allied work complete in all respect as per the entire satisfaction of EIC. NSI |
| 87 | Polishing on wooden public convenience plates with ready mixed wax polish of approved brand complete in all respect with the entire satisfaction of EIC. NSI |
| 88 | Unique identity of toilets in fiber/ PVC sheet min 3 mm thick sheet of superior quality of size 2'x2' NSI |
| 89 | Identity of Ladies toilets in fiber/ PVC sheet min. 3 mm thick sheet of superior quality of size 1'x1'. NSI |
| 90 | Identity of Gents toilets in fiber/ PVC sheet min. 3 mm thick sheet of superior quality of size 1'x1'. NSI |
| 91 | Identity of Children toilets in fiber/ PVC sheet min. 3 mm thick sheet of superior quality of size 1'x1'. NSI |
| 92 | Identity of Children toilets in fiber/ PVC sheet min. 3 mm thick sheet of superior quality of size 1'x1'. NSI |
| 93 | Identity of transgender toilets in fiber/ PVC sheet min. 3 mm thick sheet of superior quality of size 1'x1'. NSI |
| 94 | Providing and fixing of M.S. direction board/ sign board of rectangular size 457mmx305mm, 14 guage thcikness plate welded with stand post made of angle 25x25, height 4' including cost of cutting, friegt charges, apply of primming coat of approved primer, print and labour various toilet blocks witten letter (Public Toilet) in white colour complete in all respects. NSI |
| 95 | Providing and fixing of Hand Drier in Public Toilet Blocks complete in all respect to entire satisfaction of EIC NSI |
| 96 | Plastic Mug(1.5 litre) NSI |
| 97 | Providing and Fixing of Garbage Large Dust bin (plastic) 48 liters NSI |
| 98 | Providing and fixing of IRC Jali 1”x1” angle 25x5 mm with locking arrangement and primer coat complete as per satisfaction of EIC. NSI |
| 99 | Providing and fixing of Crompton Greeves 1 HP water pump with help of fasteners to be fixed at site as per satisfaction of EIC NSI |
| 100 | Credit against Old CI/MS Scrap (NSI) Please Enable Macros to View BoQ information |
