|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavation)/manual means in foundation frenches or drains not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead of 50 m All kind of soi |
| 2 | Supplying and filling in plinth under floor foundation etc with snd fine from local quarry with all lift includingspreading in horizontal layer watering gradng to required slop ramming consolidating and compacting each layer by usingplate compactor or by any suitable method complete. |
| 3 | Providing and laying dry flat brick flooring in required pattern completed. |
| 4 | Providing and laying in position cement concrete of specified grde excluding the cost of centering and shuttering All work upto plinth level 1:3:6( 1cement:3 fine sand:6 geded well burnt brick aggregate 20 mm niminal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work upto plinth level 1:1.5:3(1cement:1.5 fine sand:3 grded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement--1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforcement for RCC work including straightening cuting bending placing in position and binding complete upto plinth level thermo-Mechanically Treated bars grade Fe 500D or more |
| 9 | First class brick work foundation and pinth including cost of all materials as required complete In cement mortr 1:4(1cement:4 fine sand) |
| 10 | Centering shuttering including struttings, propping etc.and removal of form work for:Foundations, footings, bases for columns etc. for massconcrete with timber plank |
| 11 | Centering shuttering including struttings, propping etc.and removal of form work for:Lintels, beams, plinth beams, girders, bressumers andcantilevers with wooden plank |
| 12 | Centering shuttering including struttings, propping etc.and removal of form work for:Columns, Pillars, Piers, Abutments, Posts and Struts withshuttering ply |
| 13 | Centering shuttering including struttings, propping etc.and removal of form work for:Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 14 | Half brick masonary work with irst class brick work foundation and pinth including cost of all materials as required complete In cement mortr 1:4(1cement:4 fine sand) |
| 15 | 12 mm cement plaster ofmix in cement mortar 1:4(1cement:4 fine sand) in/cl Neat cement punning. |
| 16 | 12 mm cement plaster ofmix in cement mortar 1:4(1cement:4 fine sand) |
| 17 | Providing and laying 1st class quality ceramic floor tilesin different sizes (thickness to be specified by the of 1st quality conforming to IS : 15622 -2017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cementmortar 1:4 (1 cement : 4 fine sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the jointswith white cement and matching pigment etc. allcomplete as per direction of the Engineer in-charge.300 mm x 300 mm in all shades and designs |
| 18 | Steel work welded in built up section/framed workincluding cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer using steel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates andsimilar works, all complete. |
| 19 | Providing and fixing factory made door frame (singlerebate) made of solid PVC foam profile withhomogenous fine cellular structure having smoothouter integral skin having 60mm width & 30mmthickness and shall be fixed to wall as per instructionsof Engineer-In-Charge using 100x8 sheet metal CSKscrews. |
| 20 | Providing and fixing 28 mm thick door shutter madeof solid PVC foam profile with homogenous finecellular structure having smooth outer integral skinhaving 71mm width & 28mm thick as vertical &horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mmthick) or M S pipe (40mm x 20mm ) stiffener frameinsert & telescopic polymeric ‘L’ corners .The panelshall be filled with 3mm thick high - pressure compactlaminate as per manufacturer’s specifications anddirections of the Engineer-in-charge, cover mouldingshall be provided for covering fixing screws andelegant look.( for W.C. bathroom door shutter). |
| 21 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10litre low level white P.V.C. flushing cistern withmanually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floorswherever required : |
| 22 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever required :18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 23 | Providing and fixing white vitreous china flat back orwall corner type lipped front urinal basin of430x260x350mm and 340x410x265mm sizesrespectively. |
| 24 | Providing and fixing on wall face unplasticisedRigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge :110 mm OD |
| 25 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion etc.87.5 100 mm dia |
| 26 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support fortank. |
| 27 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction of Engineer in Charge.15 mm dia nominal bore |
| 28 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction of Engineer in Charge.25 mm dia nominal bore |
| 29 | Providing and fixing C.P brass bib cock of approved quality conforming to IS 8931 15 mm nominal size. |
| 30 | Providing and fixing C.P brass stop cock of approved quality conforming to IS 8931 15 mm nominal size. |
| 31 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever require :18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 32 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : 12.41.1 New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 33 | Distempering with dry distemper of approved brand andmanufacture (two or more coats) of required shade onnew work, over and including water thinnable primingcoat to give an even shade. [Payment shall be made aftersubmission of Test Certificate issued by theManufacturer] |
| 34 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade [Payment shall bemade after submission of Test Certificate issued by theManufacturer]:12.59.1 Two or more coats on new work Please Enable Macros to View BoQ information |
