|
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge and disposal of surplus excavated soils as directed, including all lead and lift and other incidental charges complete |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortarincluyding all lead and lift and other incidental charges complete |
| 3 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.2.9.1 Ordinary rock including all lead and lift and other incidental charges complete |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.10 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)including all lead and lift and other incidental charges complete |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.5 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including all lead and lift and other incidental charges complete . |
| 6 | P/l 2nd class brick work using common burnt clay building bricks in cement mortar 1:6(1cement:6 sand) all floors and all height. including all lead and lift and other incidental charges complete |
| 7 | P/l 15 mm cement plaster in single coat on fair side of bricks / concrete /stone walls for interior / exterior plastering upto all heights including arises, internal rounded angle, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4( 1 cement : 4 sand) including . |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.3 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including all lead and lift and other incidental charges complete |
| 9 | Providing and laying Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.3 Suspended floors, roofs, landings, balconies and access platformincluding all lead and lift and other incidental charges complete |
| 10 | Providing laying Steel reinforcement for R.C.C. work including straightening, cutting, bending , placing in position and binding all complete upto plinth level. 5.22.1 Mild steel and Medium Tensile steel bars including all lead and lift and other incidental charges complete |
| 11 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. including all lead and lift and other incidental charges complete |
| 12 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.80 mm thick with zinc coating not less than 275 gm/m² including all lead and lift and other incidental charges complete |
| 13 | Providing and laying Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including all lead and lift and other incidental charges complete including all lead and lift and other incidental charges complete |
| 14 | Providing and laying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in all lead and lift and other incidental charges complete Please Enable Macros to View BoQ information |
