|
| 1 | Centrifugal Pump 35 HP |
| 2 | Impeller |
| 3 | Pump shaft |
| 4 | Shaft sleeve |
| 5 | Impeller Wear Ring |
| 6 | Adjusting Bush |
| 7 | Shaft key |
| 8 | Coupling |
| 9 | Coupling Key |
| 10 | Balancing Bush |
| 11 | Gland Sleeve |
| 12 | Gland Pusher |
| 13 | Lantern Ring |
| 14 | Cooling Pipe |
| 15 | Gasket |
| 16 | Foundation |
| 17 | Foundation Nut Bolt |
| 18 | Coupling Rubber Bush |
| 19 | Coupling Nut Bolt |
| 20 | Shaft chucknut |
| 21 | Sleeve allen key nut |
| 22 | Impeller Lock Nut |
| 23 | Impeller Bush Key |
| 24 | DE bearing |
| 25 | NDE Bearing |
| 26 | Bearing Housing |
| 27 | Bearing Housing Machining Work |
| 28 | Pump Opening Fitting Alignment Transporting Work |
| 29 | Centrifugal Pump 40 HP |
| 30 | Impeller |
| 31 | Pump shaft |
| 32 | Shaft sleeve |
| 33 | Impeller Wear Ring |
| 34 | Adjusting Bush |
| 35 | Shaft key |
| 36 | Coupling |
| 37 | Coupling Key |
| 38 | Balancing Bush |
| 39 | Gland Sleeve |
| 40 | Gland Pusher |
| 41 | Lantern Ring |
| 42 | Cooling Pipe |
| 43 | Gasket |
| 44 | Foundation |
| 45 | Foundation Nut Bolt |
| 46 | Coupling Rubber Bush |
| 47 | Coupling Nut Bolt |
| 48 | Shaft chucknut |
| 49 | Sleeve allen key nut |
| 50 | Impeller Lock Nut |
| 51 | Impeller Bush Key |
| 52 | DE bearing |
| 53 | NDE Bearing |
| 54 | Bearing Housing |
| 55 | Bearing Housing Machining Work |
| 56 | Pump Opening Fitting Alignment Transporting Work |
| 57 | Centrifugal Pump 45 HP |
| 58 | Impeller |
| 59 | Pump shaft |
| 60 | Shaft sleeve |
| 61 | Impeller Wear Ring |
| 62 | Adjusting Bush |
| 63 | Shaft key |
| 64 | Coupling |
| 65 | Coupling Key |
| 66 | Balancing Bush |
| 67 | Gland Sleeve |
| 68 | Gland Pusher |
| 69 | Lantern Ring |
| 70 | Cooling Pipe |
| 71 | Gasket |
| 72 | Foundation |
| 73 | Foundation Nut Bolt |
| 74 | Coupling Rubber Bush |
| 75 | Coupling Nut Bolt |
| 76 | Shaft chucknut |
| 77 | Sleeve allen key nut |
| 78 | Impeller Lock Nut |
| 79 | Impeller Bush Key |
| 80 | DE bearing |
| 81 | NDE Bearing |
| 82 | Bearing Housing |
| 83 | Bearing Housing Machining Work |
| 84 | Pump Opening Fitting Alignment Transporting Work |
| 85 | Centrifugal Pump 60 HP |
| 86 | Impeller |
| 87 | Pump shaft |
| 88 | Shaft sleeve |
| 89 | Impeller Wear Ring |
| 90 | Adjusting Bush |
| 91 | Shaft key |
| 92 | Coupling |
| 93 | Coupling Key |
| 94 | Balancing Bush |
| 95 | Gland Sleeve |
| 96 | Gland Pusher |
| 97 | Lantern Ring |
| 98 | Cooling Pipe |
| 99 | Gasket |
| 100 | Foundation |
| 101 | Foundation Nut Bolt |
| 102 | Coupling Rubber Bush |
| 103 | Coupling Nut Bolt |
| 104 | Shaft chucknut |
| 105 | Sleeve allen key nut |
| 106 | Impeller Lock Nut |
| 107 | Impeller Bush Key |
| 108 | DE bearing |
| 109 | NDE Bearing |
| 110 | Bearing Housing |
| 111 | Bearing Housing Machining Work |
| 112 | Pump Opening Fitting Alignment Transporting Work |
| 113 | Centrifugal Pump 75 HP |
| 114 | Impeller |
| 115 | Pump shaft |
| 116 | Shaft sleeve |
| 117 | Impeller Wear Ring |
| 118 | Adjusting Bush |
| 119 | Shaft key |
| 120 | Coupling |
| 121 | Coupling Key |
| 122 | Balancing Bush |
| 123 | Gland Sleeve |
| 124 | Gland Pusher |
| 125 | Lantern Ring |
| 126 | Cooling Pipe |
| 127 | Gasket |
| 128 | Foundation |
| 129 | Foundation Nut Bolt |
| 130 | Coupling Rubber Bush |
| 131 | Coupling Nut Bolt |
| 132 | Shaft chucknut |
| 133 | Sleeve allen key nut |
| 134 | Impeller Lock Nut |
| 135 | Impeller Bush Key |
| 136 | DE bearing |
| 137 | NDE Bearing |
| 138 | Bearing Housing |
| 139 | Bearing Housing Machining Work |
| 140 | Pump Opening Fitting Alignment Transporting Work |
| 141 | VT Pump 120 HP (New) |
| 142 | Pump Shaft |
| 143 | Top Shaft |
| 144 | Pump Shaft Bearing Sleeve |
| 145 | Pump Bearing Bush |
| 146 | Intermediate Shaft |
| 147 | Intermediate Shaft Bearing Sleeve |
| 148 | Intermediate Bearing Bush |
| 149 | Intermediate Bearing Bracket |
| 150 | Impeller Bush |
| 151 | O ring |
| 152 | Sleeve Allenkey Nut |
| 153 | Gland Cover Plate |
| 154 | Gland Sleeve |
| 155 | Lantern Ring |
| 156 | Impeller |
| 157 | Impeller Wear Ring |
| 158 | Casing Wear Ring |
| 159 | Impeller Key |
| 160 | Impeller Lock Nut |
| 161 | Coupling |
| 162 | Coupling Key |
| 163 | Lock Nut |
| 164 | Locking Washer |
| 165 | Cooling Pipe |
| 166 | Foundation Nut Bolt |
| 167 | Column Pipe Flange Nut Bolt |
| 168 | Gasket |
| 169 | Split Collar |
| 170 | Solid Muff Coupling |
| 171 | Strainer |
| 172 | Pump Opening Fitting Alignment Transporting Work |
| 173 | VT Pump 150 HP |
| 174 | Pump Shaft |
| 175 | Rotor Shaft |
| 176 | Pump Shaft Bearing Sleeve |
| 177 | Pump Bearing Bush |
| 178 | Intermediate Shaft |
| 179 | Intermediate Shaft Bearing Sleeve |
| 180 | Intermediate Bearing Bush |
| 181 | Intermediate Bearing Bracket |
| 182 | Impeller Bush |
| 183 | O ring |
| 184 | Sleeve Allenkey Nut |
| 185 | Gland Cover Plate |
| 186 | Gland Sleeve |
| 187 | Lantern Ring |
| 188 | Impeller |
| 189 | Impeller Wear Ring |
| 190 | Casing Wear Ring |
| 191 | Impeller Key |
| 192 | Impeller Lock Nut |
| 193 | Coupling |
| 194 | Coupling Key |
| 195 | Coupling Rubber Bush |
| 196 | Coupling Nut Bolt |
| 197 | Lock Nut |
| 198 | Locking Washer |
| 199 | Cooling Pipe |
| 200 | Foundation Nut Bolt |
| 201 | Column Pipe Flange Nut Bolt |
| 202 | Gasket |
| 203 | Shaft Coupling |
| 204 | Strainer |
| 205 | Pump Opening Fitting Alignment Transporting Work |
| 206 | VT Pump 180 HP |
| 207 | Pump Shaft |
| 208 | Top Shaft |
| 209 | Pump Shaft Bearing Sleeve |
| 210 | Pump Bearing Bush |
| 211 | Intermediate Shaft |
| 212 | Intermediate Shaft Bearing Sleeve |
| 213 | Intermediate Bearing Bush |
| 214 | Intermediate Bearing Bracket |
| 215 | Impeller Bush |
| 216 | O ring |
| 217 | Sleeve Allenkey Nut |
| 218 | Gland Cover Plate |
| 219 | Gland Sleeve |
| 220 | Lantern Ring |
| 221 | Impeller |
| 222 | Impeller Wear Ring |
| 223 | Casing Wear Ring |
| 224 | Impeller Key |
| 225 | Impeller Lock Nut |
| 226 | Coupling |
| 227 | Coupling Key |
| 228 | Lock Nut |
| 229 | Locking Washer |
| 230 | Cooling Pipe |
| 231 | Foundation Nut Bolt |
| 232 | Column Pipe Flange Nut Bolt |
| 233 | Gasket |
| 234 | Split Collar |
| 235 | Solid Muff Coupling |
| 236 | Strainer |
| 237 | Pump Opening Fitting Alignment Transporting Work |
| 238 | VT Pump 220KW/295 HP |
| 239 | Pump Shaft |
| 240 | Top Shaft |
| 241 | Pump Shaft Bearing Sleeve |
| 242 | Pump Bearing Bush |
| 243 | Intermediate Shaft |
| 244 | Intermediate Shaft Bearing Sleeve |
| 245 | Intermediate Bearing Bush |
| 246 | Intermediate Bearing Bracket |
| 247 | Impeller Bush |
| 248 | O ring |
| 249 | Sleeve Allenkey Nut |
| 250 | Gland Cover Plate |
| 251 | Gland Sleeve |
| 252 | Lantern Ring |
| 253 | Impeller |
| 254 | Impeller Wear Ring |
| 255 | Casing Wear Ring |
| 256 | Impeller Key |
| 257 | Impeller Lock Nut |
| 258 | Coupling |
| 259 | Coupling Key |
| 260 | Lock Nut |
| 261 | Locking Washer |
| 262 | Cooling Pipe |
| 263 | Foundation Nut Bolt |
| 264 | Column Pipe Flange Nut Bolt |
| 265 | Gasket |
| 266 | Split Collar |
| 267 | Solid Muff Coupling |
| 268 | Strainer |
| 269 | Pump Opening Fitting Alignment Transporting Work |
| 270 | Slip ring motor Centrifugal 35 HP motor with material winding work |
| 271 | SWG 18 x 2 wire 18 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 6 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire, (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 272 | Motor winding labour charge HP 35 x 250 Rs. Per HP |
| 273 | Rotor winding work |
| 274 | Rotor machining work |
| 275 | Motor DE Bearing |
| 276 | Motor NDE Bearing |
| 277 | Motor Opening, fitting, alignment, Transporting charge |
| 278 | Slip ring motor Centrifugal 40 HP motor with material winding work |
| 279 | SWG 16 x 4 wire 30 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 6 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 280 | Motor winding labour charge HP 40 x 250 Rs. Per HP |
| 281 | Rotor machining work |
| 282 | Motor DE Bearing |
| 283 | Motor NDE Bearing |
| 284 | Motor Opening, fitting, alignment, Transporting charge |
| 285 | Slip ring motor Centrifugal 45 HP motor with material winding work |
| 286 | SWG 16 x 4 wire 30 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 287 | Motor winding labour charge HP 45 x 250 Rs. Per HP |
| 288 | Rotor winding work |
| 289 | Rotor machining work |
| 290 | Motor DE Bearing |
| 291 | Motor NDE Bearing |
| 292 | Motor Opening, fitting, alignment, Transporting charge |
| 293 | 45 KW/ Centrifugal 60 HP motor with material winding work |
| 294 | SWG 16 x 4 wire 30 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 6 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire, lugs 50mm connection plate (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 295 | Motor winding labour charge HP 60 x 250 Rs. Per HP |
| 296 | Rotor machining work |
| 297 | Motor DE Bearing |
| 298 | Motor NDE Bearing |
| 299 | Motor Opening, fitting, alignment, Transporting charge |
| 300 | 58 KW/ Centrifugal 75 HP motor with material winding work |
| 301 | SWG 18 x 2 wire 30 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 6 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire, lugs 70mm connection plate (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 302 | Motor winding labour charge HP 75 x 250 Rs. Per HP |
| 303 | Rotor machining work |
| 304 | Motor DE Bearing |
| 305 | Motor NDE Bearing |
| 306 | Motor Opening, fitting, alignment, Transporting charge |
| 307 | 90 KW/ Anicut turbine 120 HP (NEW) motor with material winding work |
| 308 | SWG 18 x 6 wire 58 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 6 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire, lugs 120mm connection plate (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 309 | Motor winding labour charge HP 120 x 250 Rs. Per HP |
| 310 | Rotor machining work |
| 311 | Motor DE Bearing |
| 312 | Motor NDE Bearing |
| 313 | Bearing Housing Machining Work |
| 314 | Motor Opening, fitting, alignment, Transporting charge |
| 315 | 120 KW/ Turbine 150 HP motor with material winding work |
| 316 | SWG 18 x 7 wire 58 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 6 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 317 | Motor winding labour charge HP 150 x 250 Rs. Per HP |
| 318 | Rotor machining work |
| 319 | Rotor winding work |
| 320 | Motor DE Bearing |
| 321 | Motor NDE Bearing |
| 322 | Bearing Housing Machining Work |
| 323 | Motor Opening, fitting, alignment, Transporting charge |
| 324 | Anicut Turbine 180 HP motor with material winding work |
| 325 | SWG 18.5 x 8 wire 65 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 6 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 326 | Rotor machining work |
| 327 | Motor winding labour charge HP 180 x 250 Rs. Per HP |
| 328 | Motor DE Bearing |
| 329 | Motor NDE Bearing |
| 330 | Bearing Housing Machining Work |
| 331 | Motor Opening, fitting, alignment, Transporting charge |
| 332 | 220 KW/ Turbine 295 HP motor with material winding work |
| 333 | SWG 18 x 18 wire 135 kg copper wire, No makes paper 10 no., No makes paper 7 no., Slip 8 no., 6 no., 10 no., 12 no., Doctor brand varnish, back tall, solding wire sting, paste solding, cotton tape, glass tape, PVC tape, connection copper wire 120mm (quoted price shall be deemed to be inclusive of the full cost of the new copper winding as well as the deduction/value of the old copper winding which shall be retained by the contractor) |
| 334 | Rotor machining work |
| 335 | Motor winding labour charge HP 295 x 250 Rs. Per HP |
| 336 | Motor DE Bearing |
| 337 | Motor NDE Bearing |
| 338 | Bearing Housing Machining Work |
| 339 | Motor Opening, fitting, alignment, Transporting charge Please Enable Macros to View BoQ information |
