|
| 1 | Seated Chest press:- Providing , designing and fixing of steel chest press in a pair of size 1726X692X1707 mm fabricated with main post of 114.00 mm dia and 3.00mm thick. Other pipes of 2.75mm. Pushing arm dia 42mm , 2.75 thickness, connecting pipe dia 42mm thickness 2.75mm, seat connecting pipe dia 60mm thickness 2.75mm. Handle bar dia 33mm thickness 2.75mm. The rest pipe is thickness 2.75mm , PVC Handle dia 33mm, having bottom plate 260mm dia with thickness of 12.00mm with ABS Cap/cover. All pipes madeup of hot rolled tubular steel and pregalvanized, having Oil degreasing treatment and sand blasting De-rusting treatment must be used before power coating treatment with baking temperature of more than 200 degree celsius. Using high quality paint Nippon or equivalent of 90-120 micron thickness. All Jionts of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zink primer paint to be applied at all welding points prior to finishing. Foothold shall be madeup of steel 4.00 mm thick / Nylon 4.00mm thick, with rounded edges to prevent any impact of injury and welded/ attached to main structure for vandalism proof design and long life. Bearing No 6205 and 6004 used shall be maintenance free, duly oil sealed and self-lubricated made by reputed company. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by steel /LLDPE caps for user safety. The Wquipment must have confirm the quality standerds such as DIN 79000 and EN 16630 the eqipment must have TUV certificate in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set , fixing the eqipment on to it and cover nuts and bolts with base plate cover. The cement concrete and excavation work is also include in this Item |
| 2 | Twister:-Providing , designing and fixing Twister of size 1365X1708X1292mm fabricated with main post of 140.00 mm dia and 3.00mm thick. Other pipes of 2.75mm.Yellow sleev dia 159mm thckness 8.0mm , handle beam of dia 33mm and thickness 2.75mm, User plate pipe is dia 48mm thickness 2.75mm, having bottom plate 260mm dia with thickness of 12.00mm with ABS Cap/cover. All pipes madeup of hot rolled tubular steel and pregalvanized, having Oil degreasing treatment and sand blasting De-rusting treatment must be used before power coating treatment with baking temperature of more than 200 degree celsius. Using high quality paint Nippon or equivalent of 90-120 micron thickness. All Jionts of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zink primer paint to be applied at all welding points prior to finishing. Foothold shall be madeup of steel 4.00 mm thick , with rounded edges to prevent any impact of injury and welded/ attached to main structure for vandalism proof design and long life. Bearing No 6205 used shall be maintenance free, duly oil sealed and self-lubricated made by reputed company. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by steel /LLDPE caps for user safety. The Wquipment must have confirm the quality standerds such as DIN 79000 and EN 16630 the eqipment must have TUV certificate in the manufacturing process. The equipment shall be fixed on ground with concrete of minimum strength M-25 with J-bolts and when concrete is set , fixing the eqipment on to it and cover nuts and bolts with base plate cover. The cement concrete and excavation work is also include in this Item |
| 3 | Air Walker :- Providing , designing and fixing of air walker of size 992X505X1380 mm fabricated with main post of 140mm dia and 3.00mm thick. Swing leg of dia 48mm thickness of 2.75mm , handle beam of dia 42mm and thickness 2.75mm. Other pipes of 2.75mm thick having bottom plate 260mm dia with thickness of 12.00mm with ABS Cap/cover. All pipes madeup of hot rolled tubular steel and pregalvanized, having Oil degreasing treatment and sand blasting De-rusting treatment must be used before power coating treatment with baking temperature of more than 200 degree celsius. Using high quality paint Nippon or equivalent of 90-120 micron thickness. All Jionts of pipe should be cut by CNC laser cutting and robotic welded, with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zink primer paint to be applied at all welding points prior to finishing. Foothold shall be madeup of steel 3.00 mm thick / Nylon 4.00mm thick, with rounded edges to prevent any impact of injury an |
| 4 | SEE-SAW:- Providing and fixing sea saw equipment for children embaded in cement concrete .minimum length should be 3.0 Meter. Main structure pipe should be of minimum 4mm thick , seat should be made by FRP fitted on 4 mm plate. Post and all structure should be strong enough to prevent any harmfull enjury. |
| 5 | Double Swing/palki jhoola :- Providing and fixing double palki jhoola , main pipes should be minimum of 4mm thick embaded in cement concrete. Palki should be strong enough to prevent any enjury. Height of the frame from ground should be minimum 3.0 meter. |
| 6 | SLIDE :- Providing and fixing slide equipment for children embaded in cement concrete . Post and all structure should be strong enough to prevent any harmfull enjury. FRP based equipments |
| 7 | Providing fixing and grouting steel chair |
| 8 | Construction of 1 recharge pit & 1compost pit as per engg in charge. |
| 9 | Boring, Providing and installing with casing and hdpe pipe submersible pump set in boaring i/c hdpe pipe/cable and starter etc complete |
| 10 | Supplying, stacking and spreading of good earth for plantation at site including royalty and carriage (earth measured in stacks will be reduced by 20% for payment. |
| 11 | Providing and laying Selected type of Grass turf with earth 50mm to60mm thickness on existing ground prepared with proper level andramming with required tools wooden and than rolling the surface withlight roller, making the surface smoothen and light watering thesame, as per direction of Engineer-in-Charge. |
| 12 | Providing and fixing G.I. chain link fabric fencing of required width andmesh size including strengthening with 2mm dia wire or nuts, boltsand washers as required complete with posts of specified materialand of standard design placed and embedded in cement concreteblocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stoneaggregate 40mm nominal size) every 15th post, last but one end postand corner post shall be strutted on both sides and end post on oneside only and struts embedded in cement concrete blocks70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting, earthwork and CC to be paidseparately)Made of G.I. wire. |
| 13 | Cement concrete grade M-10 (Nominal Mix) with 40 mm maximumsize of stone aggregate |
| 14 | Providing and laying 60mm thick factory made cement concreteinterlocking paver block of M-30 grade reflective type rubber moduldedglossy colour paving block made by block making machine with strongvibratory compaction and of approved size and shape laid in requiredcolour and pattern over and including 50mm thick compacted bed of stonedust/sand |
| 15 | Laying old paver blocks |
| 16 | Cement concrete grade M-20 (Nominal Mix) with 20 mm maximumsize of stone aggregate |
| 17 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 sand) |
| 18 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 19 | Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coatof primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 20 | Floor painting with floor enamel paint of approved brandand manufacture of required colour to give an even shade: Two ormore coats on new work |
| 21 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade: |
| 22 | Supply of steel tubular pole swaged type as per IS:2713-1980 Complete with baseplate and top Canopy410 SP-14 - 8.00 meter |
| 23 | Supplying of flood light with high power LED of 1 to3 W each assembled onsingle MCPCB, system lumens output with efficacy>110 lm/W. luminiarehaving color temp 6500K & 50000 burning hrs life with minimum @ L 70,The colour rendering index of LED light should be more than 70. Luminiarecomprises of driver, PF 0.95 & surge protection 4 KV. Housing made ofpressure die castaluminium with heat resistant flat glass, IP66protection.Submission LM 80-08 Form LED Source Manufacturer & LM79-08/ IS16106 from NABL approved lab. Manufacturer manadatory i/cconnection lead, testing etc to complete the job. 2 Yrs Guarantee certificatefrom manufacturer. Please Enable Macros to View BoQ information |
