|
| 1 | PROVIDING AND FIXING ARM WHEEL DOUBLE BIG TURNING |
| 2 | PROVIDING AND FIXING ARM WHEEL SINGLE BIG TURNING |
| 3 | PROVIDING AND FIXING CROSS WALKER DUAL SKYER G.I. PIPE MATE |
| 4 | PROVIDING AND FIXING CROSS CHEST SINGLE PRESS |
| 5 | PROVIDING AND FIXING SCALING LADDER |
| 6 | BIG M JHULA THREE SEATER WITH CANOPY |
| 7 | PROVIDING AND FIXING ARM AND LEG STREGTHNER |
| 8 | SUPPLY AND FIXING INTEGRAL DECORATIVE POST TOP LANT |
| 9 | Providing and fixing G.I. chain link fabric fencing of required width andmesh size including strengthening with 2mm dia wire or nuts, boltsand washers as required complete with posts of specified materialand of standard design placed and embedded in cement concreteblocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stoneaggregate 40mm nominal size) every 15th post, last but one end postand corner post shall be strutted on both sides and end post on oneside only and struts embedded in cement concrete blocks70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting, earthwork and CC to be paidseparately)Made of G.I. wire. |
| 10 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) includingramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earthto be levelled and neatly dressed.2.6.1 All kinds of soil |
| 11 | Supplying and filling in plinth under floors including,watering, ramming consolidating and dressing complete.Crusher Stone Dust |
| 12 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering All work up to plinthlevel.Cement concrete grade M-10 (Nominal Mix) with 40 mm maximumsize of stone aggregate |
| 13 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding upto floor level including costof binding wire, wastage and over laps upto 12mm horizontal/ inclinedposition of reinforcement bars in slab and beams, plinth, chajjas,lintels, upto 4.5m vertical length of reinforcement in wall columns (overlaps shall be provided as per requirement of IS : 13920; IS 456 & SP :Thermo-Mechanically Treated bars. (Fe 500 D or more)34) etc. complete |
| 14 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate. |
| 15 | Centering and shuttering including strutting, propping stretching etc.complete for and removal of form work by sheet plate or ply woodshuttering for :Foundations, footings, bases of columns, etc. For mass concrete. |
| 16 | Filling by available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m. |
| 17 | Steel work in built up M.S. tubular section (round, square orrectangular Hollow tube etc.) trusses/frame work etc./ railing work etc.including cutting, hoisting fixing in position and applying a priming coatof approved steel primer, welded and bolted including special shapedwashers etc. complete.Hot finished welded type tubes. |
| 18 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:Two or more coats on new work |
| 19 | Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coatof primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture Please Enable Macros to View BoQ information |
