|
| 1 | 11/0.4 KV Distribution transformer 25 KVA (Conventional) (Aluminium wound)(Rep-BGP) |
| 2 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 3 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 4 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 5 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 6 | XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts |
| 7 | LT AB Cable 3x50+1x16+1x35 sq.mm. with bare messanger wire |
| 8 | 11 KV Strain hardware (T&C type) fittings |
| 9 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 10 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 11 | Danger Boards Enamelled 11 KV |
| 12 | M S Channel 75X40x6 mm |
| 13 | M S Channel 100X50x6 mm |
| 14 | M S Angle 65X65X6 mm |
| 15 | Danger Boards Enamelled 33 KV |
| 16 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 17 | Bi-metallic clamps Distribution Transformers Bushing |
| 18 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 19 | 11 KV D.O. Fuse Unit Polymer type |
| 20 | LT ring type CT 100/5 A |
| 21 | Three phase CT operated Smart Meter with Box for consumer and DTR (-/5 A) |
| 22 | G.I. Wire 3.15 mm. (10 SWG) |
| 23 | M.S.Flat 50x6 mm |
| 24 | M S FLAT 65X8 mm |
| 25 | M.S.Angle 50x50x6 mm |
| 26 | Red oxide paint |
| 27 | Aluminium paint |
| 28 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 29 | Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole |
| 30 | M.S.Nuts with Bolts |
| 31 | MS strain plate 65x8mm 250mm long |
| 32 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 33 | Stay set complete without Stay wire 16 mm. (Painted) |
| 34 | Stay set 20 mm. complete without Stay wire (Painted) |
| 35 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 36 | Concreting of structures & foundation (1:3:6). |
| 37 | Complete jumpering of DTR |
| 38 | Stay Insulators 90X65mm |
| 39 | Back filling of poles with boulders. |
| 40 | LT A.B Cable tension clamps (Galvanized) |
| 41 | LT A B cable Suspension clamps (Galvanized) |
| 42 | Clamps for neutral for AB Cable |
| 43 | Aluminium Binding wire and tape |
| 44 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 45 | Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 46 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 47 | Meter cum protection box for 25 KVA DTR |
| 48 | Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- |
| 49 | Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector- |
| 50 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 51 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 52 | G.I.Pipe 40 mm Dia C grade type |
| 53 | G.I. STRIP 25X3 MM1 |
| 54 | Galvanized nut & bolt with washer |
| 55 | Bentonite compound powder |
| 56 | DTR S/s fencing (31 feet) of 5' barbet fencing on PCC support of 7No, 6' Height |
| 57 | Double Gate (2No-2.5'x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 58 | Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the items like V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. |
| 59 | Transportation Charges for All Equipments & Materials from area store to site & Site to Area store Bhopal |
| 60 | GST on Transportation @5% |
| 61 | GST on (Contractor side Material + Labour) @18% Please Enable Macros to View BoQ information |
