Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | ALMIRAH MEDIUM STEEL FD-1032CP Handle : Removing of old unserviceable handles from Almirah medium steel and S&F new CP steel handle of exisiting size to Almirah medium steel all as shown on drawing complete all as specified and directed. |
| 2 | Lock : Removing of old unserviceable lock from Almirah medium steel and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed |
| 3 | Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah med steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed |
| 4 | Legs : Removing of old unserviceable leg from Almirah med steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed by Enger-in-Charge |
| 5 | All as per Srl item No. 4.00 here-in -before but bottom sheet of Almirah medium steel. |
| 6 | All as per Srl item No. 4.00 here-in -before but shelf of Almirah medium steel. |
| 7 | Removing of old unserviceable butt hinges of Almirah medium steel and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed |
| 8 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed. |
| 9 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the almirah (internally & externally complete) |
| 10 | ALMIRAH LARGE STEEL FD-1031CP Handle : Removing of old unserviceable handles from Almirah large steel and S&F new CP steel handle of exisiting size to Almirah medium steel all as shown on drawing complete all as specified and directed. |
| 11 | Lock : Removing of old unserviceable lock from Almirah large steel and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed |
| 12 | Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah large steel including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed |
| 13 | Legs : Removing of old unserviceable leg from Almirah large steel and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed by Enger-in-Charge |
| 14 | All as per Srl item No. 13.00 here-in -before but bottom sheet of Almirah large steel. |
| 15 | All as per Srl item No. 13.00 here-in -before but shelf of Almirah large steel. |
| 16 | Removing of old unserviceable butt hinges of Almirah large steel and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed |
| 17 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed. |
| 18 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the almirah (internally & externally complete) |
| 19 | ALMIRAH MED STEEL 1/2H, 1/2 S (FD-1034)CP Handle : Removing of old unserviceable handles from Almirah medium steel 1/2H, 1/2S and S&F new CP steel handle of exisiting size to Almirah all as shown on drawing complete all as specified and directed. |
| 20 | Lock : Removing of old unserviceable lock from Almirah med steel 1/2H, 1/2S and S&F new lock of approved make, 06 lever with two keys to Almirah medium steel all as shown on drawing complete all as specified and directed |
| 21 | Locking Device : M&L for locking device and lock bar as required and as directed by Engr-in-Charge to Almirah medium steel 1/2H, 1/2S including making adjustment of door shutter & applying one coat of synthetic enamel paint over a coat of red-oxide primer after preparation of surfaces complete with spray machine all as shown on drawing complete all as specified and directed |
| 22 | Legs : Removing of old unserviceable leg from Almirah medium steel 1/2H, 1/2S and S&F new leg made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points complete all as specified and directed by Enger-in-Charge |
| 23 | All as per Srl item No. 22.00 here-in -before but bottom sheet of Almirah medium steel 1/2H, 1/2S. |
| 24 | All as per Srl item No. 22.00 here-in -before but shelf of Almirah medium steel 1/2H, 1/2S. |
| 25 | Removing of old unserviceable butt hinges of Almirah medium steel 1/2H, 1/2S and S&F new butt hinges 75mm long and adjusting door by revitting/ welding complete all as shown on drawing complete all as specified and directed |
| 26 | Replacement of old unserviceable conduit pipe with new CP steel conduit pipe of suitable size of 20mm dia having wall thickness 1.25mm to Almirah medium steel 1/2H, 1/2S complete all as specified and directed. |
| 27 | Replacement of old unserviceable socket with new stainless steel socket/ brackets of suitable size of 20mm dia conduit pipe to Almirah medium steel 1/2H, 1/2S complete all as specified and directed. |
| 28 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed. |
| 29 | S&F 02 Nos nylon bufferrs at the bottom of each legs with MS bolt complete all as specified and directed. |
| 30 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the almirah (internally & externally complete) |
| 31 | BED HARD STEEL FD/E6/MAP/08 (R)Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of suitable size, ISI marked, plywood of unpolished edging of approved quality all as shown on drawing complete all as specified and directed. |
| 32 | Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18mm thick Prelaminated Particle board with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing complete all as specified and directed. |
| 33 | All as per Srl item No. 32.00 here-in-before but foot board of Bed hard. |
| 34 | S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed. |
| 35 | Welding to broken joints of bed hard complete all as specified and directed. |
| 36 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the bed hard steel complete all as specified and directed. |
| 37 | CHARPOY WITH HARD TOP/ BED HARD OR : FD/MAP-II/01 & CWE/M/TD/05/07Removing of old unserviceable plytop from charpoy with hard top and S&F new 12mm thick plywood of suitable size, ISI marked, BWR phenol bonded plywood with unpolished edging of approved quality all as shown on drawing complete all as specified and directed. |
| 38 | Welding to broken joints of charpoy with hard top complete all as specified and directed. |
| 39 | S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown on drg complete all as specified and directed. |
| 40 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the charpoi IP folding. |
| 41 | BED HARD STEEL JCOs CWE/M/TP/06/07Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of suitable size, ISI marked, BWR plywood of unpolished edging of approved quality all as shown on drawing complete all as specified and directed. |
| 42 | Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18mm thick Prelaminated Particle board with colour/ shade approved by GE/ Engr-in-Chrge. All as per size and design shown on drawing complete all as specified and directed. |
| 43 | S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed. |
| 44 | Welding to broken joints of bed hard complete all as specified and directed. |
| 45 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the bed hard steel JCO. complete all as specified and directed. |
| 46 | BED PLY TOP FD - 246 & 247Removing of old and unserviceable Plywood top from Bed ply top and S&F new top same size of 12mm thick ply wood, ISI marked, BWR grade of appropriate size with screws complete all as specified and directed. |
| 47 | Removing of old unserviceable long rail from bed and S&F new long rail with rounded edges of size 1980mm x 90mm x 35mm of head wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified and directed. |
| 48 | All as per Srl item No. 47.00 here-in-before but short rail of size 60mm x 60mm of suitable length. |
| 49 | All as per Srl item No. 47.00 here-in-before but stiffener of size 60mm x 60mm of suitable length. |
| 50 | Removing of old unserviceable ply wood from the existing head rest of Bed ply top and S&F new OSTF plywood 04mm thick, ISI marked, BWR grade to both side of head rest including 04mm thick teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polish to ply & beading complete all as specified and directed. |
| 51 | All as per Srl item No. 50.00 here-in-before but foot rest. |
| 52 | Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of 1st class hard wood including provision of 04mm thick one side teak faced plywood and teak wood beading 04mm thick as per shape and size shown in drawing and fixed with nails duly french polish with both side MNF arrangement and fixing the same all as shown in drawing. |
| 53 | All as per Srl item No. 52.00 here-in-before but foot rest. |
| 54 | M&L for preparation of old surfaces by grinding machine including filling of cavities and french polishing with two coat of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 55 | BOOK CASE STEEL (FD - 1028/TP)Replacement of damaged broken Glass pane 3mm and S&F with new 3mm thick glass pane. Make Saint Gobin/ Modi Guard as per drg complete all as specified and directed. |
| 56 | Replacement of damaged/ unsv handle and S&F with new S/S Handle as per existing size, shape complete all as specified and directed. |
| 57 | Replacement of old existing broken unsv locks and in any position with S&F new locks with double keys fixing with suitable nuts including repair of locking device all as shown in drawing complete all as specified and directed. |
| 58 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the book case steel (internally & externally complete) |
| 59 | CHAIR WRITING STEEL/CHAIR VISITOR STEEL/CHAIR CUSHION WITH HANDLE (Drg No TP/CWE SPL DRAWING/MAP series/eqvt drgs)Replacement of old unserviceable/ broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in replacement of old unservicable seat ply with new seat of 12mm thick plywood commercial quality (ISI marked). Seat shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 61 | S&F in replacement of old unservicable foam cushion of seat with new 75mm thick PU foam cushion including pasting to hot pressed plywood 12mm complete all as specified and directed. |
| 62 | S&F in replacement of old unservicable tapestry cloth of seat with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 63 | Replacement of unserviceable hessian cloth of seat with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 64 | S&F in replacement of old unservicable back ply with new seat of 12mm thick plywood commercial quality (ISI marked) back shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F in replacement of old unservicable foam cushion of seat with 40mm thick PU foam cushion including pasting to hot pressed plywood 6mm complete all as specified and directed. |
| 66 | S&F in replacement of old unservicable tapestry cloth of back with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 67 | Replacement of unserviceable cloth of back side of chair back with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 68 | Removing of old/ unserviceable tapestry cloth from seat and back of existing Chair Writing and S&F new tapestry cloth to seat and back of Chair Writing complete all as specified and as directed by Engineer-in-Charge.(Note:- The tapestry cloth of rate ranging between Rs. 150/- to Rs. 175/- per meter as per sample approved by GE). |
| 69 | Welding to broken joints of Chair writng complete all as specified and directed |
| 70 | S&F in replacement hard PVC shoes to Chair writng all as shown on drg complete all as specified and directed |
| 71 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the Chair Writing steel complete. |
| 72 | CHAIR COMPUTER / Chair revolving with arms (Drg No FD/E6/MAP/01, TP & similar drg)Replacement of old unserviceable/ broken arm rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of Chair briefing static base complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in replacement of old unservicable seat ply with new seat of 12mm thick plywood commercial quality (ISI marked). Seat shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 74 | S&F in replacement of old unservicable foam cushion of seat with new 75mm thick PU foam cushion including pasting to hot pressed plywood 12mm complete all as specified and directed. |
| 75 | S&F in replacement of old unservicable tapestry cloth of seat with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs.175/- per meter as per sample approved by GE). |
| 76 | Replacement of unserviceable hessian cloth of seat with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 77 | S&F in replacement of old unservicable back ply with new seat of 12mm thick plywood commercial quality (ISI marked) back shall be fixed on frame with screw and including all minor repairs with welding to steel frame etc complete all as specified and as directed by Engineer-in-Charge. |
| 78 | S&F in replacement of old unservicable foam cushion of seat with 40mm thick PU foam cushion including pasting to hot pressed plywood 6mm complete all as specified and directed. |
| 79 | S&F in replacement of old unservicable tapestry cloth of back with new tapestry cloth of approved quality & color with PVC lipping all around complete all as specified and as directed. (Note:- The tapestry cloth of rate ranging between Rs.175/- per meter as per sample approved by GE). |
| 80 | Replacement of unserviceable cloth of back side of chair back with new cloth complete all as specified and directed by the Engineer-in-Charge. |
| 81 | Replacement of unserviceable hydraulic system of Chair for the adjustment of height complete all as specified and directed by the Engineer-in-Charge. |
| 82 | Replacement of old, unserviceable/ broken wheel base of Chair complete all as specified and directed by the Engineer-in-Charge. |
| 83 | Removing old/ unservicavle twin castor wheel from chair and S&F new twin wheel castors as per shape and size complete all as specified and directed. |
| 84 | Removing unserviceable synchro tilting mechanism & replacing with new synchro tilting mechanism, complete all as specified and directed by the Engineer-in-Charge. |
| 85 | CHAIR SCHOOL WITH HAND BOARD : FD/E6/MAP/05Removing old/ unservicable one piece PVC seat & back from chair school with hand board and S & F new one piece PVC seat and back of best quality as per shape and size shown in drawing complete all as specified and directed. |
| 86 | Removing old/ unservicable hand board top from chair school with hand board and S & F new top of 17/18mm thick MDF board of colour/ shade as approved by Engr-in-Charge with PVC edging and screw to 25mm hollow steel pipe inserted in 20mm as per shape and size shown in drawing complete all as specified and directed. |
| 87 | Welding to broken joints of Chair school with hand board complete all as specified and directed. |
| 88 | S&F in replacement PVC shoes to Chair school with hand board complete all as shown on drg complete all as specified and directed. |
| 89 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the chair complete all as specified and directed. |
| 90 | Chair Dining FD-203/228/279/1105M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed. |
| 91 | All as per Srl item No 90.00 above but front leg complete all as specified and directed. |
| 92 | All as per Srl item No 90.00 above but side rail complete all as specified and directed. |
| 93 | All as per Srl item No 90.00 above front/ back rail complete all as specified and directed. |
| 94 | All as per Srl item No 90.00 above but stiffner complete all as specified and directed. |
| 95 | All as per Srl item No 90.00 above but back strip support complete all as specified and directed. |
| 96 | S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 97 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 98 | Chair Dining ORs (MAP) FD/MAP-II/04M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed. |
| 99 | All as per Srl item No 98.00 above but front leg complete all as specified and directed. |
| 100 | All as per Srl item No 98.00 above but side rail complete all as specified and directed. |
| 101 | All as per Srl item No 98.00 above front/ back rail complete all as specified and directed. |
| 102 | All as per Srl item No 98.00 above but stiffner complete all as specified and directed. |
| 103 | All as per Srl item No 98.00 above but back strip complete all as specified and directed. |
| 104 | S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 105 | Removing of old unsv/ troneout PVC seats from chairs and S&F new PVC seat complete all as specified and directed by the Engineer-in-Charge. |
| 106 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 107 | Chair Writing - FD-20 (M)/202/250/280M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed. |
| 108 | All as per Srl item No 107.00 above but front leg complete all as specified and directed. |
| 109 | All as per Srl item No 107.00 above but side rail complete all as specified and directed. |
| 110 | All as per Srl item No 107.00 above front/ back rail complete all as specified and directed. |
| 111 | All as per Srl item No 107.00 above but back strip complete all as specified and directed. |
| 112 | All as per Srl item No 107.00 above but arm rest complete all as specified and directed. |
| 113 | All as per Srl item No 107.00 above but stiffner complete all as specified and directed. |
| 114 | S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 115 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 116 | Chair Easy - FD-229M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed. |
| 117 | All as per Srl item No 116.00 above but front leg complete all as specified and directed. |
| 118 | All as per Srl item No 116.00 above but side rail complete all as specified and directed. |
| 119 | All as per Srl item No 116.00 above front/ back rail complete all as specified and directed. |
| 120 | All as per Srl item No 116.00 above but side rail of back frame complete all as specified and directed. |
| 121 | All as per Srl item No 116.00 above but top or bottom rail of back frame complete all as specified and directed. |
| 122 | All as per Srl item No 116.00 above but replacement of arm rest complete all as specified and directed. |
| 123 | S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 124 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 125 | Removing of broken/ damaged plastic cane from Chair dining (Drg No FD-203/228/279/1105) with new white plastic cane 02mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as specified and directed. |
| 126 | Removing of broken/ damaged plastic cane from Chair Easy (Drg No FD-229) with new white plastic cane 02 mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as specified and directed. |
| 127 | Removing of broken/ damaged plastic cane from Chair Writing (Drg No FD-20 (M)/202/250/280) with new white plastic cane 02mm width best quality & beading half round with 03mm width white plastic cane joints/ knots of cane strif shall be under the seat frame complete all as specified and directed. |
| 128 | CHAIR VERANDAH FD-359 & 256Cutting and removing of old cane from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed by Engr-in-Charge. |
| 129 | Welding to broken joints of Chair varandah complete all as specified and directed. |
| 130 | S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed. |
| 131 | CHAIR VERANDAH MAP FD/MAP-II/06, FD/MAP-II/15Cutting and removing of old/ unsv PVC Sheet from Chair verandah, preparation of surfaces by application of paint remover and grinding machine and applying two coats of synthetic enamel white paint after application of one coat of red oxide steel primer and re-canning with cane plastic 04mm wide of approved quality in Godrej Pattern complete all as shown on drawing complete all as specified and directed by Engr-in-Charge. |
| 132 | Welding to broken joints of Chair varandah complete all as specified and directed. |
| 133 | S&F in replacement PVC shoes to Chair Verandah all as shown on drg complete all as specified and directed. |
| 134 | Chair Dining Offrs (MAP) FD/E6/MAP/06M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed. |
| 135 | All as per Srl item No 134.00 above but front leg complete all as specified and directed. |
| 136 | All as per Srl item No 134.00 above but side rail complete all as specified and directed. |
| 137 | All as per Srl item No 134.00 above front/ back rail complete all as specified and directed. |
| 138 | All as per Srl item No 134.00 above but stiffner complete all as specified and directed. |
| 139 | All as per Srl item No 134.00 above but back strip complete all as specified and directed. |
| 140 | M&L for removal of unsv seat of chair, S & F of new foam cushion 4\\" thick (ISI Marked IS-1741) 40 density for seat and covered with superior quality rexine / cloth, fixed with removable 12mm commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 141 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 142 | Chair Dining Cushion Long Bake (FD-357)M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed. |
| 143 | All as per Srl item No 142.00 above but front leg complete all as specified and directed. |
| 144 | All as per Srl item No 142.00 above but side rail complete all as specified and directed. |
| 145 | All as per Srl item No 142.00 above front/ back rail complete all as specified and directed. |
| 146 | All as per Srl item No 142.00 above but stiffner complete all as specified and directed. |
| 147 | M&L for removal of unsv backrest of dinnig chair (FD-357), S & F of new foam cushion (ISI Marked IS-1741) for backrest covered with superior quality rexine/ cloth, fixed with removable 06mm BWR grade commercial plywood as per drawing. Including repair/ replacement of decorative wooden beading and design pattern on all three sides of the backrest complete all as specified and directed. |
| 148 | M&L for removal of unsv seat of chair, S & F of new foam cushion 4\\" thick (ISI Marked IS-1741) 40 density for seat and covered with superior quality rexine / cloth, fixed with removable 12mm commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 149 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 150 | Chair Easy Cushion (FD-358)M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, complete all as specified and directed. |
| 151 | All as per Srl item No 150.00 above but front leg complete all as specified and directed. |
| 152 | All as per Srl item No 150.00 above but side rail of seat frame complete all as specified and directed. |
| 153 | All as per Srl item No 150.00 above front/ back rail of seat frame complete all as specified and directed. |
| 154 | All as per Srl item No 150.00 above but side rail of back frame complete all as specified and directed. |
| 155 | All as per Srl item No 150.00 above but top or bottom rail of back frame complete all as specified and directed. |
| 156 | All as per Srl item No 150.00 above but replacement of arm rest complete all as specified and directed. |
| 157 | M&L for removal of unsv seat of chair, S & F of new foam cushion 75mm thick (ISI Marked IS-1741) 40 density for seat fixed with removable 12mm BWR grade commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 158 | Removal of rexine cloth from existing seat of chair and providing new cover of approved shade duly stitched and fixing all as per drawing complete all as specified and directed by Engr-in-charge (Sample of rexine cloth shall be approved by the GE). |
| 159 | M&L for removal of unsv back of chair, S & F of new foam cushion 50mm thick (ISI Marked IS-1741) 40 density for seat fixed with removable 12mm BWR grade commercial ply wood as specified in drg and as directed and approved by Engr in charge. |
| 160 | Removal of rexine cloth from existing back of chair and providing new cover of approved shade duly stitched and fixing all as per drawing complete all as specified and directed by Engr-in-charge (Sample of rexine cloth shall be approved by the GE). |
| 161 | S&F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 162 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer complete all as specified and directed. |
| 163 | Dual desk with Seat (Desk size-1060mm x 450mm x 650mm & Seat size- 1060mm x 300mm x 335mm) [Drawing No.- TP]Removing of old unserviceable top from desk and S & F new top of size 18\\" x 42\\" of desk made out of 18mm thick BWR plywood duly pasted with 1mm laminated sheed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 164 | Removing of old unserviceable front board from desk and S & F new front board of size 12\\" x 42\\" of desk made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 165 | Removing of old unserviceable seat and S & F new seat of size 15\\" x 42\\" made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 166 | Removing of old unserviceable back and S & F new back of size 8\\" x 42\\" made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 167 | Welding to broken joints of dual desk with Seat complete all as specified and directed |
| 168 | S&F in replacement PVC shoes to dual desk with Seatcomplete all as shown on drg complete all as specified and directed |
| 169 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the desk. (For Steel Surfaces). |
| 170 | Dual desk with Seat (Desk size-1060mm x 450mm x 650mm & Seat size- 1060mm x 300mm x 415mm) [Drawing No.- TP]Removing of old unserviceable top from desk and S & F new top of size 18\\" x 42\\" of desk made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 171 | Removing of old unserviceable front board from desk and S & F new front board of size 12\\" x 42\\" of desk made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 172 | Removing of old unserviceable seat and S & F new seat of size 15\\" x 42\\" made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 173 | Removing of old unserviceable back and S & F new back of size 8\\" x 42\\" made out of 18mm thick BWR plywood duly post formed, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed. |
| 174 | Welding to broken joints of dual desk with Seat complete all as specified and directed |
| 175 | S&F in replacement PVC shoes to dual desk with Seat complete all as shown on drg complete all as specified and directed |
| 176 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the desk. (For Steel Surfaces). |
| 177 | Desk Steel [Drawing No.- FD-1021]Removing of old unserviceable top from desk and S & F new top of size suitable to desk as shown on drawing made out of 18 mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of top complete all as per drawing, as specified and or directed. |
| 178 | Removing of old unserviceable bottom from desk and S & F new bottom of size suitable to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of bottom complete all as per drawing, as specified and or directed. |
| 179 | Removing of old unserviceable back from desk and S & F new back of size suitable to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. Complete all as per drawing, as specified and or directed. |
| 180 | Removing of old unserviceable side from desk and S & F new side of size suitable to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of bottom complete all as per drawing, as specified and or directed. |
| 181 | Welding to broken joints of desk complete all as specified and directed. |
| 182 | S & F new front board to cover leg room of size 1270mm x 300mm to desk as shown on drawing made out of 18mm thick Prelaminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at open ends of bottom complete all as per drawing, as specified and or directed. |
| 183 | S&F in replacement PVC shoes to desk complete all as shown on drg complete all as specified and directed |
| 184 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the desk. (For Steel Surfaces). |
| 185 | PEG TABLE FD-277Removing of old unserviceable top from peg table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed. |
| 186 | Replacement of old unserviceable leg from existing peg table and S&F the same size new leg made out of 1st class hard wood teak to Peg table duly french polished all as shown on drawing complete all as specified and directed by Engineer-in-Charge. |
| 187 | All as per Srl item No 186.00 here-in-before but long top rail. |
| 188 | All as per Srl item No 186.00 here-in-before but short/ bottom rail. |
| 189 | All as per Srl item No 186.00 here-in-before but stiffener of Peg table. |
| 190 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 191 | LOCKER BED SIDE STEEL :- (FD-257 & Eqvt drawing)Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drg complete all as specified and directed |
| 192 | Replacement of old unserviceable bow handle with new 100mm long CP steel bow handle all as shown on drg complete all as specified and directed |
| 193 | Replacement of unserviceable conduit pipe with new CP steel conduit pipe of siutable size of 20mm dia having wall thickness 1.25mm to locker steel complete all as specified and directed |
| 194 | Replacement of unserviceable socket with new aluminium socket/ brackets suitable for MS 20mm dia conduit pipes complete all as specified and directed |
| 195 | Removing of old unserviceable foot rest from locker bed side steel and supply and fixing new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray machine over a coat of primer after preparation of surfaces complete all as specified and directed. |
| 196 | All as per Srl item No 195.00 above here-in -before but bottom sheet of locker bed side steel. |
| 197 | Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65mm long with gas welding/ revitting complete all as shown on drawing complete all as specified and directed |
| 198 | M&L for refixing of loose shelves with mild steel revitting/ spot welding complete all as specified and directed |
| 199 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint. Make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the Locker (internally & externally complete) |
| 200 | RACK SHOE STEEL FD/E6/MAP/02 (R)Welding to broken joints of Rack Shoe steel complete all as specified and directed |
| 201 | S&F in replacement hard rubber/ PVC shoes at the bottom of Rack shoe steel all as shown on drg complete all as specified and directed |
| 202 | Removing of old/ unserviceable Jali (Shelf) from existing Rack Shoes steel and S&F new Jali (Shelf) duly black painted to Rack shoe steel complete all as shown on drawing complete all as specified and directed |
| 203 | M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the shoe rack steel. |
| 204 | SOFA CHAIR SINGLE SEATER (TP)Removing of old unserviceable seat springs and MS Rod of U Shape including old jute/ coir foam from the seat of sofa chair and S & F new Box frame (Top seat, bottom seat, Both Sides in taper shape, front side shall made of 18mm in U shape as suitable to sofa chair be provided) suitable to sofa single seater as shown on drawing and existing, made out of 18mm thick BWR grade plywood, colour/ shade as approved by GE. Complete all as per drawing, as specified and or directed. |
| 205 | Removing of old unserviceable back springs/ MS Rod of U Shape including old jute/ coir foam from the back of sofa chair and S & F new box in taper shape suitable to sofa single seater as shown on drawing and existing, made out of 18mm thick BWR grade plywood, colour/ shade as approved by GE. Complete all as per drawing, as specified and or directed. |
| 206 | Removal of tapestry cloth from existing seat of sofa chair single seater and providing new cover (tapesty cloth of make D Decor, cloth fusion, yellow weaves, bombay dying) of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing all as per drawing and as directed. Complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 207 | S & F of new foam of 40 D of size 100mm duly fixed and suitable to seat of sofa chair. Complete all as specified and directed by Engr-in-charge. |
| 208 | Removal of tapestry cloth from existing back of sofa chair single seater and providing new cover with 02 x No. crystal buttons(tapesty cloth of make D Decor, cloth fusion, yellow weaves, bombay dying) of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing all as per drawing and as directed. Complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 209 | Removal of tapestry cloth from existing handle of sofa chair single seater and providing new cover (tapesty cloth of make D Decor, cloth fusion, yellow weaves, bombay dying) of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing all as per drawing and as directed. Complete all as specified and directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE). |
| 210 | S & F of new foam of 40 D of size 75mm duly fixed and suitable to back of sofa chair. complete all as specified and directed by Engr-in-charge. |
| 211 | M&L for repair/replacement with 12 mm BWR plywood for Handle Box Type 'H' fixed to single-seater wooden sofa chair, including new foam pasting and replacement of rectangular handle/spare parts, Complete all as specified and directed by Engr-in-charge. |
| 212 | S&F new SS legs in replacement old wooden legs to Sofa chair single seater complete all as shown on drg complete all as specified and directed |
| 213 | TABLE BEDSIDE (FD/E6/MAP/15(R) and relevent drgs)M&L for replacement of existing unserviceable Top of Table bedside with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round table top, complete all as directed by Engineer in charge. |
| 214 | M&L for replacement of back side of Table bedside made out of 06mm thick BWR plywood commercial best quality, complete all as directed by Engineer in charge. |
| 215 | M&L for replacement of upper drawer of Table bedside made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 216 | M&L for replacement of bottom drawer of Table bedside wtih new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 217 | M&L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE shoe, complete all as directed by Engineer in charge. |
| 218 | M&L replacement of existing unserviceable sides of Table bedside with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever required, complete all as directed by Engineer in charge. |
| 219 | S&F in repairs telescopic chennel of 10'' size shall be provided for smooth functioning of drawers of table bedside as per drg and as directed by Engr-in-Charge. |
| 220 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the table bedside steel. (For Steel Surfaces). |
| 221 | TABLE DRESSING GENTS WITH MIRROR MAP Removing the existing unserviceable sides and supply & fix new left side made of 18mm MDF board bonded with phenol formaldehyde resin, exterior grade-II both side teak colour as shown on drgs and directed by Engr-in-charge. |
| 222 | Removing the existing unserviceable hinges and supply & fix new Piano type hinges of stainless steel all as shwn on drgs and as directed by Engr-in-charge. |
| 223 | Removing the unserviceable mirror and supply & fix new mirror of 5mm thick all as specified and shown on drgs. |
| 224 | Removing the existing unserviceable glass shelf and supply & fix new glass shelf of 5.0mm thick all as shwn on drgs and as directed. |
| 225 | Removing the existing unserviceable/ broken complete magnetic catcher set and supply & fix new complete magnetic catcher set all as shown & specified on drgs and as directed by Engr-in-charge. |
| 226 | Removing the existing unserviceable back side of mirror and S & F new back side made of 6mm commercial plywood all as shwn on drgs and as directed. |
| 227 | Removing the existing unserviceable back side of cabinet and S & F new back side made of 12mm commercial plywood all as shwn on drgs and as directed.Note:- Unit rate quoted for all the above items shall be deemed to include for connected minor repairs wherever necessary and polishing of table dressing gents with mirror. |
| 228 | M&L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 229 | TABLE DRESSING LADIES (FD/MAP-II/07)M&L for replacement of broken/ damaged mirror including frame of Table dressing ladies with new one mirror of 05mm thick of size as shown on drg of approved quality fixed to wooden frame, complete all as directed by Engineer in charge. |
| 230 | M & L for replacement of back side of mirror of Table dressing ladies made out of 06mm thick BWR plywood commercial for frame of best quality, complete all as directed by Engineer in charge. |
| 231 | M & L for replacement of hard wood support member of size 45 x 35 x 1520mm for mounting mirror of Table dressing ladies made out of teak wood of best quality, complete all as directed by Engineer in charge. |
| 232 | M & L for replacement of existing unserviceable Top of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round table top, complete all as directed by Engineer in charge. |
| 233 | M & L for replacement of drawer of Table dressing ladies made out of out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & 06mm thick BWR plywood commercial as in bottom of drawer, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 234 | M & L for replacement of existing unserviceable shutter of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading all round, providing one CP Handle of best quality complete all as directed by Engr-in-Chage. |
| 235 | M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of TABLE DRESSING LADIES with GI screw, complete all as directed by Engineer in charge. |
| 236 | M & L for replacement of existing unserviceable sides of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as directed by Engineer in charge. |
| 237 | M & L for replacement of existing unserviceable back of the box of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever required, complete all as directed by Engineer in charge. |
| 238 | M & L replacement of existing unserviceable bottom of Table dressing ladies with new one made out of 18mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 04mm thick teak wood beading whereever requred, complete all as directed by Engineer in charge. |
| 239 | M & L for replacement of existing unserviceable magnetic catcher with new one of best quality complete all as directed by Engr-in-Chage. |
| 240 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 241 | TABLE DRESSING GENTS WITH MIRROR FD-230Removing of old unserviceable looking mirror from table dressing gents with mirror and supplying and fixing new looking mirror of size 750 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing complete all as specified and directed. |
| 242 | Removing old broken/ unserviceable sunmica from the top of table dressing gents and S&F new 1.5mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed. |
| 243 | Removing old broken/ unserviceable sunmica from the drawer of table dressing gents and S&F new 1.5mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed. |
| 244 | Removing old broken/ unserviceable knob from table dressing gents and S&F new 40mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed. |
| 245 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 246 | TABLE OFFICE OFFICER STEEL:- FD-1003Removing of old unserviceable top from Table Office Officer Steel and supply and fixing of new top made out of 18 mm pre laminated particle board with colour/ shade as approved by Engr-in-Charge/ GE |
| 247 | Removing of old unserviceable lock from Table Office Officers steel and S&F new lock with two keys all as shown on drawing and as directed. |
| 248 | Removing of old unserviceable drawer from Table Office Officers steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and as directed complete all as specified and directed |
| 249 | S & F in replacement 120mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table Office Officers complete all as specified and directed. |
| 250 | S&F in replacement PVC shoes to Table Office Officers steel complete all as shown on drg complete all as specified and directed |
| 251 | Welding to broken joints of Table office officer's steel with drawer complete all as specified and directed |
| 252 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the table steel. (For Steel Surfaces). |
| 253 | TABLE OFFICE CLERK STEEL :- (FD-1004)Removing of old unserviceable top from Table Office Officer Steel and supply and fixing of new top made out of 18mm thick pre laminated particle board with colour/ shade as approved by Engr-in-Charge / GE |
| 254 | Removing of old unserviceable lock from Table Office clerk steel and supply and fixing new lock with two keys all as shown on drawing complete all as specified and directed |
| 255 | Removing of old unserviceable drawer from Table Office clerk steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing complete all as specified and directed |
| 256 | S&F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table Office Clerk steel complete all as specified and directed |
| 257 | S&F in replacement PVC shoes to Office clerk steel complete all as shown on drg complete all as specified and directed |
| 258 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the table steel. (For Steel Surfaces). |
| 259 | TABLE CENTRE TWO TIER :- [CWE/M/F/29/95 & Equivelent Drgs]Removing of old unserviceable top from Table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed |
| 260 | Removing of old unserviceable bottom from Table and supply and fixing new bottom made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make-Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed |
| 261 | Welding to broken joints of Table centre steel complete all as specified and directed |
| 262 | S&F in replacement PVC shoes to Table centre steel complete all as shown on drg complete all as specified and directed |
| 263 | S & F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table centre steel complete all as specified and directed |
| 264 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the table centre steel. (For Steel Surfaces). |
| 265 | TABLE 3' x 2' STEEL WITH DRAWER :- FD-1008Removing of old unserviceable top from Table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make:- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed |
| 266 | Welding to broken joints of Table 3' x 2' steel with drawer complete all as specified and directed |
| 267 | S&F in replacement PVC shoes to Table 3' x 2' steel with drawer complete all as shown on drg complete all as specified and directed |
| 268 | S & F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table 3' x 2' steel with drawer complete all as specified and directed |
| 269 | Removing of old unserviceable lock from Table 3' x 2' steel with drawer and supply and fixing new lock with two keys all as shown on drawing complete all as specified and directed |
| 270 | Removing of old unserviceable drawer from Table 3' x 2' steel with drawer and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and applying one coat of synthetic enamel olive green paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and directed |
| 271 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the table steel. (For Steel Surfaces). |
| 272 | TABLE 3' x 2' STEEL WITHOUT DRAWER:- FD-1007Removing of old unserviceable top from Table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make:- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed |
| 273 | Welding to broken joints of Table 3' x 2' steel without drawer complete all as specified and directed |
| 274 | S&F in replacement PVC shoes to Table 3' x 2' steel without drawer complete all as shown on drg complete all as specified and directed |
| 275 | S & F in replacement 100mm long piece of 25 Sqmm MS tube having wall thickness of 1.6mm including welding to Table 3' x 2' steel without drawer complete all as specified and directed |
| 276 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the table steel. (For Steel Surfaces). |
| 277 | TABLE 900 x 600mm with/ without drawer FD-223/224/283/284Removing of old unserviceable top from Table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make:- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, complete all as specified and directed. |
| 278 | All as per Srl item No 277.00 above but leg made out of 1st class hard wood |
| 279 | All as per Srl item No 277.00 above but replacement of long rail |
| 280 | All as per Srl item No 277.00 above but replacement of short rail |
| 281 | All as per Srl item No 277.00 above but replacement of drawer with fittings |
| 282 | All as per Srl item No 277.00 above but replacement of bottom centre stiffner |
| 283 | All as per Srl item No 277.00 above but replacement of bottom side stiffner |
| 284 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 285 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 286 | TABLE DINING 6/ 8 PERSONS FD-239/273/376/1115/FD/E6/MAP/03Removing of old unserviceable top from table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make:- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed for table dining 8 persons |
| 287 | All as per Srl item No 286.00 above but for Table dining 6 pers |
| 288 | All as per Srl item No 286.00 above but S&F new leg made of 1st class hard wood |
| 289 | All as per Srl item No 286.00 above but long rail for Table Dinging 8 Person |
| 290 | All as per Srl item No 286.00 above but long rail for Table Dinging 6 Person |
| 291 | All as per Srl item No 286.00 above but short rail |
| 292 | All as per Srl item No 286.00 above but support stiffner |
| 293 | S&F new bracket of size 100 x 100 x 30mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as specified and directed by Engr-in-charge |
| 294 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 295 | TABLE DINING 4 PERSONS [FD/MAP Series]Removing of old unserviceable top from table and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make:- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed for table dining 4 persons |
| 296 | All as per Srl item No 295.00 above but S&F new leg made of 1st class hard wood |
| 297 | All as per Srl item No 295.00 above but long rail for Table Dinging 4 Person |
| 298 | All as per Srl item No 295.00 above but short rail |
| 299 | All as per Srl item No 295.00 above but support stiffner |
| 300 | S& F new bracket of size 100 x 100 x 30mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete all as specified and directed by Engr-in-charge |
| 301 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 302 | TABLE WRITING:- FD-33, FD-275Removing of old unserviceable top from Table Writing and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make:- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 303 | Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg complete all as specified and directed |
| 304 | Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned complete all as specified and directed |
| 305 | Replacement of side/ Door Shutters to be made out of 18mm thick exterior grade pre-laminated particle board covered with all round 4mm thick teak wood beading and duly fixed with knobs and piano type hinges 4mm thick with 4 lever 40mm brass lock complete all as specified and directed |
| 306 | Replacement of back of table writing which shall be made out of 06mm thick commercial ply wood ISI marked complete all as specified and directed |
| 307 | Replacement of Drawers of table writing to be made out of 18mm thick exterior grade pre-laminated particle board ISI marked and 4mm thick beading teak wood to be fixed and provided one knob complete all as specified and directed |
| 308 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. |
| 309 | Table Computer - FD/E6/MAP/03Removing of old unserviceable top from Table Computer and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make:- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 310 | Removing of old unserviceable bottom from Table Computer and fixing the new bottom of same size made out of 18mm thick exterior grade pre-laminated particle board with all round PVC edging all as shown on drawing and as directed. |
| 311 | All as per Srl item No 310.00 here-in-before but vertical board on side of Table computer. |
| 312 | All as per Srl item No 310.00 here-in-before but keyboard tray of Table computer. |
| 313 | All as per Srl item No 310.00 here-in-before but drawer of Table computer. |
| 314 | All as per Srl item No 310.00 here-in-before but pull out mouse tray of Table computer. |
| 315 | Removing of old unserviceable telescopic channel of key board and supply and fixing new stainless steel telscopic channel to Table computer complete all as specified and directed by Engineer-in-Charge. |
| 316 | S&F new Nylon buffers to Table Computer all as shown on drawing complete all as specified and directed |
| 317 | S&F new knobs to Table Computer all as shown on drawing complete all as specified and directed |
| 318 | Welding to broken joints of table complete all as specified and directed |
| 319 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. (For Wooden surfaces) and M&L for removing existing paint by application of paint remover/ grinding machine, applying one coat of red oxide steel primer and two coats of synthetic enamel paint make/ colour/ shade as approved by Engr-in-Charge/ GE by spray painting after denting and filling with putty and preparation of surface thoroughly to the table computer steel. (For Steel Surfaces). |
| 320 | TEAPOY FD - 34/232/278/382Removing of old unserviceable top from Teapoy and supply and fixing new top made out of 18mm thick exterior grade pre-laminated particle board, colour/ shade as approved by GE. 2mm thick PVC edge-binding of Make:- Rehau/ Kinex shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed |
| 321 | All as per Srl item No 320.00 above but leg made of 1st class hard wood |
| 322 | All as per Srl item No 320.00 above but long rail |
| 323 | All as per Srl item No 320.00 above but short rail |
| 324 | All as per Srl item No 320.00 above but stiffner |
| 325 | S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg complete all as specified and directed by Engr-in-charge. |
| 326 | M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and french polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
