|
| 1 | Schedule 'A' |
| 2 | Dismantling of wrought iron of mild steel work of any description not otherwise provided complete all speciified and directed. |
| 3 | Dismantling fencing wire mesh chain link fencing etc, any type complete all speciified and directed |
| 4 | Dismantling of existing RCC/ Steel /Wooden posts or struts (wood, steel or R.C.C.) any section,concrete ,brick work ,massonery etc . including taking out embedded portion and making good disturbed ground complete all speciified and directed |
| 5 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | S&F in repais galvanised ,2 srand steel barbed wire 2.24mm dia barbed with 2mm dia barsbs at 75mm spacibg and staining rail staining bolts incl, securing or tying at crossing with and provision of galvanised mild steeled wire staples or steel pins etc as directed (each line wire to be measured) complete all speciified and directed |
| 7 | M&L for cement concrete Type C1 1:3:6 (Using 20mm graded aggregate) in post holes complete all speciified and directed. |
| 8 | S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all speciified and directed |
| 9 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,any description and in any position, all as directed. |
| 10 | M&L for Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr -in- Charge. |
| 11 | Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut not exceeding 12cm long and dia complete all speciified and directed |
| 12 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 13 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 14 | M&L cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 15 | M&L for PCC 1:3:6 type C1 (20mm graded Agg) as in coping incl necessary formwork etc complete all speciified and directed |
| 16 | Demolition of brick or stone/boulder masonry built in cement mortar complete all speciified and directed |
| 17 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 18 | All as per item No16 but except bricks complete all speciified and directed |
| 19 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed. |
| 20 | M & L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface fair and evenwithout extra using cement complete all speciified and directed |
| 21 | M &L forPreparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all speciified and directed. |
| 22 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W(Gde E- 250)quality A complete all speciified and directed |
| 23 | S&F 1mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required complete all speciified and directed |
| 24 | M&L for preparing of new steel surfaces and applying two coat of sythetic enemel paint over one coat of red oxide any description ,over 10cm in width or girth not otherwise described complete all speciified and directed. |
| 25 | M&L for preparing of new steel surfaces and two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all speciified and directed |
| 26 | Labour only Restraining and resecuring including making good of Plain mild steel wire, galvanised chain link fencing including straining and refixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed. |
| 27 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 28 | S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls complete all speciified and directed |
| 29 | Dismantling floor, hearth , chequred tiles, interlocking tiles tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 30 | M&L PCC 1:3:6 type C2 (40mm graded aggregate) 75mm as in sub basse complete all as specified and directed. |
| 31 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15 mm thick sreed bed in CM 1:4 complete all as specified and directed. |
| 32 | Demolition of RCC of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).incl removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed |
| 33 | M&L RCC (Nominal Mix) Type B1, 1:2:4(20mm graded aggregate) using in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 34 | M&L for reinforced cement concrete (nominal mix) in M-15 B1 (20mm graded aggregates) for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.Note :- Reinforcement and form work required shall be measured and paid seperately. |
| 35 | M&L formwork to sides and soffits of floor or roof beams and lintels, cantilevers, overhangs etc for flat and fair finished surfaces complete all as specified and directed. |
| 36 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 37 | M & L for reinforcement Round bars 10mm dia and over cut to length, bent to shape reqd including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 38 | M & L for reinforcement TMT bars 10mm dia and over cut to length, bent to shape reqd including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 39 | All as per item No 37 above but 5mm dia and over upto includig 10mm dia in stirrups spacers complete all as specified and directed. Please Enable Macros to View BoQ information |
