|
| 1 | M&L for half brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 etc. complete all as specified and directed by Engineer in charge. |
| 2 | M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick concrete on internal surface finished even and smooth without using extra cement |
| 3 | M&L 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M & L for Glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick cement mortar 1:4 rendering as specified and as directed. |
| 5 | S&F Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement mortar 1:4 bedding, all as specified and as directed. |
| 6 | S&F in Pillar taps,15mm dia fancy type, chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe and fixed all as specified and directed. |
| 7 | S&F in repairs 15mm dia stop valves/ gate valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 8 | M&L for applying two coats of cement based paint to newly plastered surface of wall over a coat of primer including preparation complete all as specified and as directed. |
| 9 | Supplying and laying of 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 10 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed. |
| 11 | S &F of Brass Elbow 16/20 mm bore complete all as specified |
| 12 | S &F of Brass Elbow (3/4 X ½) 20 mm bore complete all as specified |
| 13 | S &F of Brass Tee 16/20 mm bore complete all as specified |
| 14 | M & L for cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) span, cills, steps; seismic and other similar bands, plinth courses, copings, kneelers, apex stones, bed plates, complete all as specified & directed. |
| 15 | S & F mild steel TMT bars 10mm dia & over as in reinforcement including cutting, cranking bending & binding with mild steel annealed wire not less than 0.9mm dia or securing with clip. complete all as specified & directed. |
| 16 | All as per item No.15.00 here in above but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders complete all as specified & directed. |
| 17 | Providing & laying of precast cement concrete set in cement mortar 1:4 Type B0 1:2:4 (12.5 mm graded aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame complete all as specified & directed. |
| 18 | Formwork to sides and soffits of beams, bands and the like for fair finished surfaces of concrete. |
| 19 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & directed. |
| 20 | S & F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 21 | M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied complete all as specified and directed by Engineer -in-Charge. |
| 22 | M&L for applying two coat of cement based paint to newly plastered surface of wall over a coat of primer including preparation complete all as specified and as directed. |
| 23 | S&F in repairs Angular cock (15 mm dia of bore), cast copper alloy, one way / two way fancy type Chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed as Engr-in-charge. |
| 24 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed as Engr-in-charge. |
| 25 | M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc. complete all as specified and directed by Engineer in charge. |
| 26 | Excavation in trenches not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for foundation of pole and laying of CI/ GI/ DI/ PPR pipe and getting out in Hard/dense of soil, complete all as specified and directed by Engr-in-charge. |
| 27 | Removing surplus soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point, complete all as specified and directed by Engr-in-charge. |
| 28 | Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engr-in-charge. |
| 29 | Material and labour for Drilling and tapping DI/cast iron water mains (in position) for branch connections of the internal dia 20mm bore complete all as directed. |
| 30 | Supplying and laying of 25mm (outer dia) bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings in trenches complete all as specified. |
| 31 | Supply and fix of new 25 mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe, complete all as specified and directed by Engr-in-charge. |
| 32 | Material and labour for construction of brick masonry valve chamber of size 600mm x 600mm x 750mm (Internal dimension) with PCC 1:3:6 foundation 150mm thick, brick work 23cm thick built in CM 1:6, PCC 1:3:6 coping 50 mm thick, plastering 15mm thick in CM 1:4 to all internal and exposed surfaces including excavation earth work in any type of soil, MS sheet cover 3mm thick fixed with angel iron frame 30x30x4 mm including hinges of size 125mm with locking arrangement embedded in PCC and painting ot MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc, complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
