|
| 1 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 2 | Demolition of brick/Stone work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed. |
| 3 | M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L for rolled section as in channel sections fixed independently without connecting plate etc of Fe410-W (grade E-250) quality A as in purposemade lintel complete all as spd |
| 5 | M&L for SS curtain rod 25mm dia with caps/lobs and wall mounting bracket cutting in to length required at site complete all as specified and directed by Eng-In-Charge |
| 6 | M&L for RCC Type B1 1:2:4 ( nominal Mix) using 20 mm stone agg as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajja, canopies, deck slabs and shelves and the like complete all as spd |
| 7 | M & L for form work to soffits of suspended slabs such as roof slabs, floor slabs and lintels, chajja landing and similar work n exc 200mm thick. |
| 8 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopingfo r columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spd and directed |
| 9 | Cutting holes into or through brick walls in one brick wall for inserting holdfast built in cement mortar and make good in CM 1:3 or cement concrete 1:2:4 type B1 complete all as spd |
| 10 | Cutting out decayed brick work and refacing with new brick (1 course of headers to 3 courses of strechers) and making goodin CM 1:4 complete all as spd |
| 11 | Forming jambs etc to opening including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work in cement mortar in CM 1:4 or complete |
| 12 | Making good under cills or over lintel including all pinning when necessary in CM !:4 complete all as sps |
| 13 | M&L 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate bedding of tiles/Kota stone all as specified and ditedted at site complete all as specified and directed. Note : Padding will be provide where require as directed by EIC |
| 14 | Renewing tiles in patches, area n.exc. 5Sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old glazed tiles complete all as spd |
| 15 | Supply only for joint free, Vitrified Ceramic tiles of light shade 10 mm thick square/rectangular) polished , area of each tile exc 0.36 but n.exc 0.42 sqm complete all as spd |
| 16 | M&L for joint free, Vitrified Ceramic tiles of light shade 10 mm thick (square/rectangular) polished , area of each tile exc 0.36 but n.exc 0.42 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 17 | All as per serial at item No 16.00 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4,complete all as specified and as directed. |
| 18 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including ccreed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified & directed. |
| 19 | M & L for virified Ceramic tiles Dark Shade Shade/Double charged/ultrachargedlight shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, on vertical surfaces such as skirtings, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster on stone masonry surfaces or surfaces ather than fair faces of brick work complete all as specified & directed. |
| 20 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed. |
| 21 | All as per item No.20 here-in-above but not exc 1.5 sqm each complete all as specified and as directed. |
| 22 | S&F for powder coating ( minium thickness of power coating 50micron) aluminium frame for doors & window etc with one or more rebates including jointing cleat for fixing etc complete all as spd |
| 23 | S&F for powder coated ( minimum thickness of powder coating not less than 50 micron) aluminium door /window shutter of weighing 0.55Kg/mtr including necessary joining cleats glazing clips rubber packing , powder coated aluminium snap beading with screws, 5mm thick coloured glass and necessary locking arrangement of 4 lever mortise lock and handle 2Nos, hinges et; as specified etc complete all as specified and directed. |
| 24 | S&F Box type steel Ventilator with 80x40x 1.25mm RHS frame with side hung shutters (double shutters for glass and gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed by the Engineer-in-Charge |
| 25 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheetreinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed. |
| 26 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified & directed. |
| 27 | S&F 75mm thick mild steel butt hinges medium wight, cold rolled complete all as specified & directed. |
| 28 | S&F 200 mm aluminium anodised barrel tower bolts of extruded section complete all as specified & directed. |
| 29 | S&F 150 mm aluminium handles of extruded section fabricated type complete all as specified & directed. |
| 30 | S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified & directed. |
| 31 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed. |
| 32 | S&F decorative SS handle of 25mm dia pipe and 300 mm long fixed in glass doors complete all as specified & directed. |
| 33 | S&F in repair of vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and as directed. |
| 34 | S&F in repair of PVC valve-less, syphonic action type, flushing cistern, low level, 10 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 35 | S&F in repair of vitreous table top china wash basin,snow white , size 550mmx400mmx160mm as approved by GE) with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed. |
| 36 | S&F in repair of 5mm thick looking mirror of size exceeding 0.50 sqm but not exceeding 1.00 sqm fixed on walls with 19mm decorative SS round mirror cap screws with cap cover, nails decorative, mirror nail decorative cover complete all as specified. |
| 37 | M&L for 15-18mm granite (of any type) work (table rubbed and polished) for window sill, door sill, window jamb etc and over 15mm thick screed bed in cement mortar (1:6) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all specified and directed. |
| 38 | M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks/cills etc & the likes complete laid over 15 mm thick in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc and rounding of the edges of stone slabs as in cooking platforms all as directed at site. |
| 39 | Demolition of RCC Not exc 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work |
| 40 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key, scrubbing dowm with water etc |
| 41 | M&L for 15 mm rendering thick in CM (1:6) on fair faces of brick work/stone surfaces finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. |
| 42 | M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC) on fair faces of brick/stone surfaces, finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note: WPC in 5 mm thick 2nd layer plaster measured and paid separately. |
| 43 | M&L for 10 mm rendering thick in CM (1:3) on fair faces of concrete surfaces in ceiling finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirting etc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. |
| 44 | M&L for preparation of new plastered of wall surface and applying two coats of oil bound distemper, over a coat of chalk whitening primer over and incl a layer 3mm thick of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 45 | M&L for preparation of surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof) of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer's drums with seal intact. |
| 46 | M&L for preparation of new plastered of ceiling surface and applying three coats of white wash on new plastered surface of ceiling surface, complete all as specified and as directed. |
| 47 | M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with watering and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof) of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer's drums with seal intact. |
| 48 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening primer, over a layer of 3.0 mm thick wall care putty to get smooth and level finish, complete all as specified and directed. |
| 49 | S&F in repair of stop valves angular type ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia GI tubing pipe, high pressure, with crutch butter fly handle complete all as specified |
| 50 | S&F in repair of health faucet with 1200 mm long flexible mild steel tube CP 20 mm dia with wall hook complete all as specified and as directed. |
| 51 | S&F in repair of two way angle cock chromium plated fancy type 15 mm bore complete all as specified and as directed. |
| 52 | S&F in repair of fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore complete all as specified and as directed. |
| 53 | S&F in repair of 15 mm bore CP brass bib cock screwed for iron pipe of ferrule and fixed complete all as specified and as directed. |
| 54 | S&F in repair of 15 mm bore CP brass angular stop cock screwed for iron pipe of ferrule and fixed complete all as specified and as directed. |
| 55 | Taking up or down steel tubing and connection of 20 mm bore tube of any description & in any position complete all as specified and directed. |
| 56 | Taking up or down steel tubing and connection of 25 mm bore tube of any description & in any position complete all as specified and directed. |
| 57 | Supply and fixing 20 mm dia (nominal)3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed |
| 58 | Supply and fixing 25 mm dia (nominal)3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed |
| 59 | S&F Vitreous China urinals, size 370x390x 590 mm , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed |
| 60 | S&F in repair of brass chromium plated soap dish complete all as directed. |
| 61 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated ceiling surfaces and preparation of ceiling surface and applying Three coats of White wash on plastered surface of ceiling surface, complete all as specified and as directed. |
| 62 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening primer, complete all as specified and directed. |
| 63 | S&F in replacement of CP towel rail 600 mm long fancy type with wall bracket made of cast copper alloy, chromium plated, complete all as directed. |
| 64 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified. |
| 65 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed |
| 66 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed |
| 67 | S&F PVC (SWR) bends 110mm dia |
| 68 | S&F PVC (SWR) bends 75mm dia |
| 69 | S&F PVC (SWR) 75mm dia floor trap , plain with grating including jointing with solvent complete |
| 70 | Taking down carefully aluminum/copper point wiring (light/fan/ socket/ power) complete including fittings such as switch, socket, ceiling roses light fittings etc and and making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. |
| 71 | M&L for modular point wiring One light/Fan/bell point /Exhaust fan controlled by one switch one way complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators complete all as specified and as directed. |
| 72 | All as per serial item No 71.00 as above but for one socket out let 5 Amps 3 Pin on same board with other switch |
| 73 | All as per serial item No 71.00 as above but for one socket out let 5 Amps 3 pin on independent board |
| 74 | All as per serial item No 71.00 as above but with single core multistranded cable of size2.5 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 2.5 Sq mm all as specified and directed |
| 75 | Material and labour for Elect bell AC 230 Volts single phase musical type. |
| 76 | Material and labour for Modular bell push flush type 5 Amps . |
| 77 | Supply and fixing in replacement Modular switch 15/16 Amps one way 240 V. |
| 78 | Supply and fixing in replacement Modular socket out let 2 in 1 multi pin 5 Amps flush type universal. |
| 79 | Supply and fixing in replacement Modular switch 5 Amps one way. |
| 80 | Supply and fixing in replacement Modular socket outlet in repair 2 in 1, 3 pin, 5 and 15 Amps socket outlet 240 volts SP |
| 81 | Supply and fixing in replacement modular Fan step regulator, 120W - 2 module |
| 82 | Supply and fixing in replacement Ceiling rose on PVC FRLS board size 65 X 50 mm three terminal Complete. |
| 83 | S&F in repair of new LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 84 | S&F in repair of new LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 85 | S&F LED luminaire 600x600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for false ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed Please Enable Macros to View BoQ information |
| 86 | S&F LED luminaire 600x600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for false ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed Please Enable Macros to View BoQ information |
