|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER CHILKA, INS CHILKA, KHURDA, ODISHA - 752 037 NAME OF WORK : ADDITION/ ALTERATION OF BLDG P-139 FOR PROVISION OF DEFICIENT TOILETS AT LOGISTIC COMPLEX AND PROVISION OF ACCOMMODATION FOR OXYGEN GENERATION PLANT AT INHS NIVARINI AT INS CHILKA Contract No : GE/CHL/8177 OF 2025-2026 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for flyash brick work with straight or curved on plan exc 6M mean radius built in CM 1:4 etc all complete |
| 3 | M&L for Brickwork with flyash bricks, straight or curvedon plan to any radius in half brick thick walls,built in CM 1:4, complete all as specified and as directed |
| 4 | M&L for Plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregates) as in floor finishes, 25mm thickness etc complete all as specified and as directed |
| 5 | M&L for Joint free Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed 15 mm thick in CM 1:6 etc complete all as specified and as directed |
| 6 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/300X450x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match in vertical surfaces such as skirting / dado tiles fixed over and including backing coat of CM 1:4 10mmthick etc complete all as specified and directed. |
| 7 | M&L for Plain cement concrete, 75mm thickness, type C2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection including necessary formwork finishing even and smooth with using extra cement complete all as specified and as directed |
| 8 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed |
| 9 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. as per specification & drawin complete all as specified snd as directed |
| 10 | S&F Aluminium anodised,150mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed |
| 11 | S&F Aluminium alloy, anodised,sliding door bolt of 300mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed |
| 12 | S&F Extruded aluminium alloy handles,150mm long fabricated type, anodised complete all as specified and as directed |
| 13 | S&F Butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed |
| 14 | S&F rotational moulded polyethylene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed |
| 15 | S&F 25mm bore Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed |
| 16 | S&F 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed compete all as specified ans as directed |
| 17 | S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings of size 25mm bore complete all as specified & directed. |
| 18 | Ditto all as per above but 20 mm dia steel tube |
| 19 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed |
| 20 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed |
| 21 | S & F PVC (SWR) junction single,(Double T) 75mm bore with access door equal or unequal complete all as specified and as directed |
| 22 | S&F PVC (SWR) bends with access door any radius 75mm bore complete all as specified and as directed |
| 23 | S&F PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed |
| 24 | S&F pvc floor trap 75mm with grating including jointing with solvent cement complete all as speccified and as directed |
| 25 | M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite fixed over and including screed bed 15mm thick in CM 1:6 etc complete all as specified and directed |
| 26 | Rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work. |
| 27 | S &F in vitreous china counter type wash basins size 600x480mm including cutting for and pinning in ends of brackets or errecting stand white 32mm dia bottle traps, PVC connections 15mm size with PTMT nuts of length 600 mm, waste pipe screwd for pipe or connections including necessary packing, union and cap and fixed etc including brackets compete all as specified and as directed |
| 28 | S&F Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device, flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for high/low level cistern etc compete all as specified and as directed |
| 29 | S&F in chromium plated CP health faucet with 1 mtr CP tubing covered by CP coated rings etc all completed. |
| 30 | S&F PVC valveless, syphonic action type of 10 liter capacity, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets and PVC connections of 15mm size with PTMT nuts of length 600 mm etc., complete all as specified and as directed |
| 31 | S&F Bib taps 15mm bore, cast copper alloy with crutch handle,fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed |
| 32 | S&F stop/angle valves of 15 mm dia chromium plated fancy type screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge |
| 33 | S&F Toilet paper holder of with flat recessed type SS and fixed to walls with chromium plated (CP) brass screws complete all as specified and directed |
| 34 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 35 | S&F Tubular towel rail, aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed |
| 36 | S&F Soap dish, vitreous China white, approximatesize 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed |
| 37 | S&F Pillar taps 15mm bore, cast copper alloy, with capstan heads,chromium plated,fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed |
| 38 | S&F Vitreous China urinals, half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 39 | S&F Urinal spreader of CP for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed |
| 40 | M&L for PVC waste pipe for urinals 32mm dia |
| 41 | S & F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for windows/ Doors/Ventilators/Particians with one or more tracks including joining cleats/ channel for fixing glass/ mesh complete all as directed by Engr-in-Charge. |
| 42 | S&F Powder coated aluminium window and ventilator shutters, side hung type wthout sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed |
| 43 | S&F Aluminium anodised powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 60X45mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed. |
| 44 | S&F Frosted glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specifeid and directed |
| 45 | Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 46 | Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M complete all as specified and as directed. |
| 47 | M&L for water proofing treatment to roof as per per manufacturer's instructions with the following specification:-.(a) 15 mm thick plastering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement including preperation of roof surfaces.(b) Applying evenly a coat of bitumineous primer @ 0.5 litre per Sqm(c) Applying evenly a coat of hot blow bitumen 85/25 grade @ 1.2 Kg per Sqm (d) Applying APP based polymeric membrane minimum 3 mm thick and minimum weighing 3kg/sqm laid on primed surface by LPG forced torch application with a side & end overlaps of minimum 100 mm and including sealing all joints by thermo fusion complete all as per manufacturer's instructions (e) Applying evenly a coat of hot blown bitumen 85/ 25 grade @ 1.2 Kg per Sqm over water proofing membrane (f) Applying a coat of bituminous based aluminium primer @ 100 gm/Sqm on top complete all as per manufacturer's instructions |
| 48 | Supply only water proofing compound. |
| 49 | Taking down cement plaster on brick or stone walls etc including racking out joints, backing for key scrubbing down with water etc |
| 50 | M&L for rendering 15mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and smooth complete all as specified and as directed. |
| 51 | M&L for rendering 10mm thick fair faces of brick or concrete sufaces in cement mortar 1:4, including finishing even and fair complete all as specified and as directed. |
| 52 | M&L for rendering 5mm thick on ceiling surfaces in CM 1:3 including finishing even & smooth complete all as specified and as directed. |
| 53 | M&L for preparation of new plastered external wall surfaces of any description over 10 cm width/girth and including applying two coat of weather coat anti dust emulsion paint, exterior grade of approved shade over a coat of alkali guard anti efflorescence primer as per manufacturer's instruction complete all as specified and as directed by Engineer -in - Charge. |
| 54 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat oil bound distemper over a coat of alkali resistant primer and a coat of putty complete all as specified and directed by Engr-in-Charge. |
| 55 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coat white wash complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L for complete removal of existing treatment plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for complete removal of existing treatment old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and greasy spots of wall and applying two coat of oil bound distemper of over 3mm thick putty of approved shade on wall complete all as specified and directed by Engr-in-Charge. |
| 58 | M&L for complete removal of existing decorated surface of wall and preparation of old plastered decorated surfaces of external wall by brooming down or steel wire bruching, scraping down smoke soot, moulds, moss and efflorescencent salts and trading oil and greasy spots of any description over 10 cm width/girth and including applying two coat of weather coat anti dust emulsion paint, exterior grade of approved shade as per manufacturer's instruction and also rewrite the bldg No as per existing font style and size with enamel paint of approved shade complete all as specified and as directed by Engineer -in - Charge. |
| 59 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; ramed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed by Engr-in -charge. |
| 60 | M&L for preparation of painting on steel surfaces of any description over 10 cm in width or girth, on new surface over a coat of red oxide zin primer and two coat of synthetic enameled paint over it all as specified and as directed. |
| 61 | Surface dressing n exc 15 cm deep in soft/loose soil etc all as completed. |
| 62 | Excavating over areas, n exc 1.5 m deep and getting out in any type of soil etc all completed. |
| 63 | Excavating in trenches, n exc 1.5m wide and n exc 1.5 m in depth ; for foundation, etc. and getting out in any type of soil etc all completed. |
| 64 | Ditto all as above item but depth exceeding 1.50 m and n exc 3 m in depth. |
| 65 | M&L for PCC 1:4:8 , type D-2, (using 40mm graded aggregate) as in filling and mass concrete etc all complete |
| 66 | Returing , filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 67 | Removing excavating material n exc.50m and depositing where directed at a level n exc. 15. m above the starting point. |
| 68 | M& L for Moorum / red bajri filling in floors or paving , laid in layers laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc all complete |
| 69 | M&L for RCC (M - 30) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under- reamed piles and mass Concrete complete all as specified and directed by Engr in charge. |
| 70 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in flat fair finished surfaces of concrete. |
| 71 | M&L for RCC M30 (Design Mix) for Columns, pillars, piers, post and struts complete all as specified and directed by Engr in charge. |
| 72 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns in square, rectangular for fair finished surface of concrete. |
| 73 | M&L for RCC M30 (Design Mix) for floor, roof, beams, lintels, over 1.5m span complete all as specified and directed by Engr in charge. |
| 74 | Use and waste of Formwork to sides and soffits of floor or roof beams, lintels, for flat surfaces including fair finished surfaces of concrete. |
| 75 | M&L for RCC M30 (Design Mix) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and like complete all as specified and directed by Engr in charge. |
| 76 | Use and waste of Formwork to soffits of suspended slabs such as roof , slabs, floor slabs, landing and similar work, not exceeding 200mm thick (Horizontal or sloping) for flat surfaces including fair finished surfaces of concrete. |
| 77 | M&L for RCC M30 (20mm graded aggregate) (Design Mix) for Chajjas complete all as specified and directed by Engr in charge. |
| 78 | Formwork to chullah hoods, Chajjas troughs and similar items including edges including fair finished |
| 79 | S & F TMT bars 10mm dia and cut over,cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 80 | Ditto all as above item but 6mm to 8mm dia. |
| 81 | Ditto all as above item but 5mm dia and over upto and including 10mm dia in strirups, spacers and binders. |
| 82 | M&L for green marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking plateforms like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr in charge. |
| 83 | S&F Rolling Shutters, 1.25 mm thick, gear operated type with bevel gear box and crank handle. |
| 84 | S&F Pressed steel frames sizes 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 85 | S&F 30 mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in charge. |
| 86 | M&L for preparation of new wooden surfaces over 10 cm with or girth and applying 02 coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 87 | M&L for 40mm thick PCC type B-1, 1:2:4 (20mm graded aggregate ) as in flooring finished even and smooth with using extra cement all as specified and directed. |
| 88 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in subbase complete all as specified and directed by Engr in charge.. |
| 89 | M&L for preparing of new surfaces of wall and applying three coats of white wash all as specified and directed. |
| 90 | M&L for finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete all as specified and directed by Engr in charge. |
| 91 | M&L for 50mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) including weathering, slightly rounded or chamfered angles etc complete as in plinth protection. |
| 92 | M&L for broken stones or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, wantered and rammed to a true surface. |
| 93 | M&L 38 mm thick glass dividing strips, 3mm thick ,inserted in position, conform to design complete all as specified and directed by Engr in charge. |
| 94 | M&L for treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square metre of vertical surface (Area of sub structure in contact with Backfill to be measured). |
| 95 | M&L for treating the top surface of filled earth at the rate of 5 ltrs of emulsion per square meter of surface . |
| 96 | M&L for treating the soil under plinth protection at the rate of 5 ltrs of emulsion per square metre of surface area |
| 97 | M&L for treating the soil along with external perimetre of building of building at the rate of 2.25 ltr of emulsion per metre of perimeter. wall. |
| 98 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane for window shutter. |
| 99 | Material and labour for point wiring with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. Note for item Nos.1 to 2: (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate.(ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be included in the qouted rate |
| 100 | Ditto all as per above item but for one 3/5 pin 6 Amps socket outlet on the same board with other switches complete all as specified & directed. |
| 101 | Ditto all as per above item but for one 3/5 pin 6 Amps socket outlet on the independent board. |
| 102 | Material and labour for point wiring (Concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed. |
| 103 | Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,5 and 15 Amps, flush type ISI marked complete all as specified and as directed. |
| 104 | Material and labour for switch socket combination 5 Pin, 6 Amps flush type ISI marked complete all as specified and as directed |
| 105 | Materials & labour for switch piano flush button 5/6 Amps single pole, 1 way 240 V ISI marked complete all as specified and as directed. |
| 106 | Materials and labour for ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed. |
| 107 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 108 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete ncluding taking down old unserceable light fitting complete all as specified and as directed. |
| 109 | Material and labour for sub main wiring (concealed type) with two single core PVC insulated cable with Copper conducter unsheathed cable of size 2.5 sqmm drawn through & including PVC conduit with 2.5 sqmm PVC insulated copper wire single core for continuous earthing including taking down old one complete all as directed. Note : (i)Two run of 2.5 sqmm & one run of 2.5 sqmm of cable shall be measured as single run.(ii) Cost of chase cutting for conduit wiring shall be to be included in unit rate. (iii) Wire should be used in proper colour code red/yellow/blue for phase, black for neutral & green for earth |
| 110 | Supply & fixing MCB DB (Double door) SPN, 4 way (concealed in wall) sheet steel with bus bar, din rail, neutral link and earth bar with fitting & fixtures all as specified and directed. |
| 111 | Supply and fix MCB single pole 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. |
| 112 | Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed |
| 113 | Supply and fixing LED Bldg light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete all as specified and directed. |
| 114 | Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part-I . |
| 115 | M&L for submain wiring with single core PVC insulated unsheathed stranded copper conductor of 4 sqmm (nominal area) drawing through PVC conduit concealed conduit two run (phase and neutral) and one 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth all as specified and as directed. |
| 116 | S & F for socket outlet 2 in 1 3 pin 5 amps flush type complete all as specified and directed. |
| 117 | Supply and fixing of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata) |
| 118 | S & F MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar 240 Volt, IP 43- Metal door. complete all as specified and as directed |
| 119 | S &F stepped type electronic fan regulator 230 volt suitable for 1200mm/1400 mm sweep celing fan including necessary electric connection complete all as specified and directed.(Make: Anchor or equivalent) |
| 120 | Supply and Fix Ceilling Fan white/Ivory in colour complete with blades, down rods and accessories, 230 V, 1200 mm Sweep,min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC)Make : Khaitan/Crompton Greaves/Usha |
| 121 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louver complete all as specified and as directed. Make: Havells Model: Ventil Air-DX WHT or equivalent in Usha/Orient. |
| 122 | Supply, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable with stranded alluminium conductors 10 sqmm x 4 core,1100 Volt grade, laid in trenches / surface / wall / roof / pole / through pipe,compleate all as specified and as directed Note :- (i) Pipe and bricks for cable protection and sand cushioning shall be measured and paid separately as per site . |
| 123 | Supply and fixing HDPE double wall pipe corugated pipe of size 77 mm X 63 mm Outer dia /internal dia for cable protection laid in trenches in lieu of sand/brick protection complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
