|
| 1 | Almirah Large Steel with Shelves (FD-1030) |
| 2 | Removing unserviceable shelve and replacing with new shelve made out of 1mm thick MS Sheet, fixed with welding including painting with two coats of synthetic enemal paint over a coat of red oxide primer, complete all as specified as on drg and directed by Engr-in Charge. |
| 3 | Removing Unsv locks and replacing with new locks 04 leaver of basis Make: Godrej/Harrison, complete all as specified as on drg and directed by Engr-in Charge. |
| 4 | Removing uncsereviceable locking system and replacing with new locking system, 3 way locking device complete as specifide as on drg and directed by Engr-in-charge. |
| 5 | Removing unservisable handle and replacing with new CP handle. Complete all as specified and directed by Engr-in-charge. |
| 6 | Removing unserviceble foot rest and replacing with new foot rest made out of 1mm thick MS Sheet including welding and painting with two coat of synthetic enemal paint over a coat of red oxide primer. Complete all as specified as on drg and directed by Engr-in-charge. |
| 7 | M&L for denting and painting to almirah large with two coats of synthetic enamelled paint OG colour/smoke grey over and including one coat of red oxidde primer. Make of apint: Asian/ Nerolac/ Luxol / Borolac/ Shalimar, complete all as specied as on drg and directed by Engr-in Charge. |
| 8 | Locker Steel (FD-1029) |
| 9 | Removing unserviceable shelve and replacing with new shelve made out of 1mm thick MS Sheet, fixed with welding including painding with two coats of synthetic enemal paint over a coat of red oxide primer, complete all as specified as on drg and directed by Engr-in Charge. |
| 10 | Removing unserviceable hasp and staple and fixing new hasp and staple CP 75mm size, complete all as specified as on drg and directed by Engr-in Charge. |
| 11 | Removing unserviceable handle and fixing new handle best quality complete all as specified as on drg and directed by Engr-in Charge. |
| 12 | Removing unserviceable foot rest and replacing with new foot rest made out of 1mm thick MS Sheet including welding and painting with two coats of synthetic enemal paint over a coat of red oxide primer, complete all as specified as on drg and directed by Engr-in- Charge. |
| 13 | Removing uncsereviceable locking system and replacing with new locking system, 3 way locking device complete as specifide as on drg and directed by Engr-in-charge. |
| 14 | M&L for denting and painting to almirah large with two coats of synthetic enamelled paint OG colour/smoke grey over and including one coat of red oxidde primer. Make of apint: Asian/ Nerolac/ Luxol / Borolac/ Shalimar, complete all as specied as on drg and directed by Engr-in Charge. |
| 15 | Table office Offr steel (FD-1003) |
| 16 | Removing of unserviceable top and fixing new top made out of 18mm thick both side prelaminated particle board teak face with around wooden beading. Top size 1200x 610x 760mm, complete all as specied as on drg and directed by Engr-in Charge. |
| 17 | Removing unserviceable drawer and replacing with new drawer made out of 1.0mm thick MS Sheet (3 Nos for each table), each drawer fixed with PVC handle including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specied as on drg and directed by Engr-in Charge. |
| 18 | Removing Unserviceable locks and replacing with new locks Make: Godrej/Harrison, complete all as specified as on drg and directed by Engr-in Charge. |
| 19 | Table office Clerk steel (FD-1004) |
| 20 | Removing of unserviceable top and fixing new top made out of 18mm thick both side prelaminated particle board (Exterior grade) teak face with around wooden beading. Top size 1200x610x760mm, complete all as specied as on drg and directed by Engr-in Charge. |
| 21 | Removing unserviceable drawer and replacing with new drawer made out of 1.0mm thick MS Sheet (3 Nos for each table), each drawer fixed with PVC handle including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specied as on drg and directed by Engr-in Charge. |
| 22 | Removing Unserviceable locks and replacing with new locks Make: Godrej/Harrison, complete all as specified as on drg and directed by Engr-in Charge. |
| 23 | Bed hard plywood top (FD-247) |
| 24 | Removing unservicable long rail and fixing of new long rail including polishing, complete all as specified as on drg and directed by Engr-in-Charge. |
| 25 | Removing unservicable short rail and fixing of new short rail including polishing, complete as specified as on drg and directed by Engr-in-Charge |
| 26 | Removing unservicable plywood and fixing of new plywood 12mm thick commercial type ISI marked of size 1980x900mm Make: Kit ply/National/Greenply, complete all as specified as on drg and directed by Engr-in-Charge |
| 27 | Repairing head rest side including legs and polishing complete all as specified as on drg and direcyed by engr-in-Charge |
| 28 | Repairing leg rest side including legs and polishing all as specified as on drg and directed by Engr-in Charge. |
| 29 | Repair/ replacing of stiffener, well seasoned teak wood complete all as specified as on drg and directed by Engr-in-Charge. |
| 30 | M&L for polishing the bed after rubbing the surface with empry paper and applying French polishy of best quality of Make: Asian/Nerolac, complete all as specified as on drg and directed ny Engr-in-Charge |
| 31 | Chair Easy (FD-1108) |
| 32 | Removing unservicable front leg and fixing new front leg made out of well seasoned teak wood with 50mm round plastic shoe including polishing complete all as specified as on drg and directed by Engr-in-Charge |
| 33 | Removing unservicable rear leg and fixing new rear legs made out of well seasoned teak wood with 50mm round plastic shoe including polishing complete all as specified as on drg and directed by Engr-in-Charge |
| 34 | Repairing seat frame, complete all as specified as on drg and directed by Engr-in-Charge. |
| 35 | Reparing head rest side including legs and polishing, all as shown drg complete all as specified as on drg and directed by Engr-in -Charge. |
| 36 | Recaning of seat and back with 2mm plastic cane of best quality in godrej pattern complete all as specified as on drg and directed by Engr-in-charge. |
| 37 | M&L for polishing the chair easy after rubbing the wooden surface with emery paper and applying French polish if best quality ISI marked, complete all as specified as on drg and directed by Engr-in-charge.(Make: Asian/Nerolac) |
| 38 | Chair Writing (FD-1107) |
| 39 | Removing Unserviceable front leg and fixing new front leg made out of well seasoned teak wood along with 50mm round plastic show including polishing. complete all as specified as on drg and directed by Engr-in-charge. |
| 40 | Removing Unserviceable rear leg and fixing new rear leg made out of well seasoned teak wood along with 50mm round plastic show including polishing. complete all as specified as on drg and directed by Engr-in-charge. |
| 41 | Repair/replacing of stiffener, well seasoned teak wood, complete all as specified as on drg and directed by Engr-in-Charge. |
| 42 | Repair/replacing of back rest stiffener, complete all as specified as on drg and directed by Engr-in-Charge. |
| 43 | S&F in repair of new arm made out of well seasoned teak wood complete all as specified as on drg and directed by Engr-in-Charge. |
| 44 | S&F in repair of side rail, complete all as specified as on drg and directed by Engr-in-Charge. |
| 45 | Recaning of sheet with 2mm plastic cane of best quality in godrej pattern with 4mm thick side beading. complete all as specified as on drg and directed by Engr-in-Charge. |
| 46 | M&L for publishing the chair writing after rubbing the surface with emery paper and applying French polish of best quality complete all as specified and directed by Engr-in charge. |
| 47 | Chair Dining (FD-1105) |
| 48 | Removing Unserviceable front leg and fixing new front leg made out of well seasoned teak wood as shown on drg along with 50mm round plastic show including polishing. complete all as specified and directed by Engr-in-charge. |
| 49 | Removing Unserviceable rear leg and fixing new rear leg made out of well seasoned teak wood along with 50mm round plastic show including polishing. complete all as specified as on drg and directed by Engr-in-charge. |
| 50 | Repair/replacing of front stiffener, well seasoned teak wood, complete all as specified as on drg and directed by Engr-in-Charge. |
| 51 | Repair/replacing of back stiffener, complete all as specified as on drg and directed by Engr-in-Charge. |
| 52 | S&F in repair of side rail complete all as specified as on drg and directed by Engr-in-Charge. |
| 53 | Recaning of seat chair dining with 2mm plastic cane of best quality in godrej pattern with 4mm thick side beading complete all as specified as on drg and directed by Engr-in Charge. |
| 54 | M&L for polishing the chair dining after rubbing the surface with emery paper and applying French polish of best quality, complete all as specified as on drg and directed by Engr-in-Charge. |
| 55 | Teapoy Wooden (FD-278) |
| 56 | Removing unserviceable leg and fixing new legs made out of well seasoned teak wood along with 50mm round plastic shoe including polishing, complete all as specified as on drg and directed by Engr-in-Charge |
| 57 | Removing unserviceable top and fixing new top made out of 18mm thick both side pre-laminated particle board exterior grade teak face with around wooden beading. Complete all as specified as on drg and directed by Engr-in Charge. |
| 58 | Repair/replacing of stiffener, well seasoned teak wood, complete all as specified as on drg and directed by Engr-in-Charge. |
| 59 | Repair/replacing of new frame, complete all as specified as on drg and directed by Engr-in-Charge. |
| 60 | M&L for polishing the teapoy after rubbing the surface with emery paper and applying French polish of best quality, complete all as specified as on drg and directed by Engr-in-Charge. |
| 61 | Almirah Med Steel with Shelves (FD-1032) |
| 62 | Removing unserviceable shelve and replacing with new shelve made out of 1mm thick MS Sheet, fixed with welding including painting with two coats of synthetic enemal paint over a coat of red oxide primer, complete all as specified as on drg and directed by Engr-in-Charge. |
| 63 | Removing unserviceable lock and replacing with new locks 04 leaver of brass Make: Godrej/Harrison, Complete all as specified as on drg and directed by Engr-in-charge. |
| 64 | Removing unserviceable locking system and replacing with new locking sysytem, 3 way locking device complete all as specified as on drg and directed by Engr-in-charge. |
| 65 | Removing unserviceable handle and replacing with new handle CP, complete all as specified as on drg and directed by Engr-in-charge. |
| 66 | Removing unserviceable foot rest and replacing with new foot rest made out of 1mm thick MS Sheet including welding and painting with two coats of synthetic enemal paint over a coat of red oxide primer, complete all as specified as on drg and directed by Engr-in- Charge. |
| 67 | M&L for denting and painting to almirah medium with synthetic enamelled pait OG colour/smoke grey over and including one coat of red oxide primer. Make of Paint: Asian/Nerolac/Luxol/Borolac/Shalimar, complete all as specified as on drg and directed by Engr-in- Charge. |
| 68 | Table writing Wooden (FD-275) Removing of unserviceable wooden top and fixing new top made out of 18mm thick both side prelaminated partical board (Exterior grade) teak face of suitable size with around wooden beading. Complete all as specified as on drg and directed by Engr-in-Charge. |
| 69 | Charpoy GI Pipe with Nylon newar (FD-220) |
| 70 | Removing unserviceable GI elbow form existing GI charpoy and replacing with new elbow, medium grade ISI marked for 32mm bore GI Pipe, complete all as specified as on drg and directed by Engr-in-Charge. |
| 71 | Removing unserviceable long rail and supply and fixing new rail made out of 32mm bore GI Pipe medium grade ISI marked, complete all as specified as on drg and directed by Engr-in-Charge. |
| 72 | Removing unserviceable short rail and fixing of new short rails made out of 32mm bore GI Pipe ,complete all as specified as on drg and directed by Engr-in-Charge. |
| 73 | Removing unserviceable leg and fixing of new legs made out of 32mm bore GI Pipe medium grade, complete all as specified as on drg and directed by Engr-in-Charge. |
| 74 | Removing unservicable newar from GI charpoy and fixing of plywood commercial 12mm thick of best quality(Make National/Century/Green Ply) with 10 nos 65mm nut & bolt fixed to the frame incl welding two nos stiffener made out of flat iron 40mmx6mm thick bincluding drilling holes etc. complete all as specified as on drg and directed by Engr-in-Charge. |
| 75 | Removing unservicable checknuts of 32mm dia and supply & fixing new checknut medium grade ISI marked, complete all as specified as on drg and directed by Engr-in Charge. |
| 76 | Charpoy double bunk GI/Steel (FD-220/1122) Removing unservicable plywood from Charpoy double bunk steel and fixing of new plywood commercial 12mm thick of best quality (Make : National/Century/ Green ply) with 10 nos 65mm Nut & bolt to the frame and including welding two Nos stiffener made of Flat iron 40mmx6mm including drlling holes etc. (2 Nos plywood for each charpoy) complete all as specified as on drg and directed by Engr-in-Charge. |
| 77 | Chair tubler steel with Arms (FD-75) Removing unservicable seat & back & Fixing new seat & back including M&L denting and painting to steel frame of chair tubler steel with arms, complete specified as on drg & directed by Engr-In- Charge. |
| 78 | Table Dining 8/6 Pers (FD-1115) |
| 79 | Removing unserviceable leg and fixing new legs made out of well seasoned teak wood along with 50mm round plastic shoes incl polishing complete all as specified as on drg and directed by Engr-in-Charge. |
| 80 | Removing of unserviceable top and fixing new top made out of 18mm particale board Top with around wooden beading, complete all as specied as on drg and directed by Engr-in Charge. |
| 81 | Repair/replacing of stiffners, complete all as specified as on drg and directed by Engr-in-charge. |
| 82 | Sofa Chair Single Seater (FD-281) Removing unserviceable seat and back (both) from sofa chair single seater and fixingh new seat and back (both) to sofa single chair cushion shall be sleepwell/Kurnal which shall be approved by Engr-in-Charge. Size of seat & back shall be 550x530x100mm having 32mm density duly covered with superior quality of tapestry price range of tapestry cloth is not than Rs. 350 per mtr, complete all as specified as on drg and directed by Engr-in-charge. |
| 83 | Sofa set five Seater (FD-281/1113) Removing unserviceable seat and back (both) from sofa set five seater and fixing new seat and back (both) to sofa set five seater cushion shall be sleepwell/ Kurnal which shall be approved by Engr-in-Charge. Superior quality of tapestry price range of tapestry cloth is not than Rs. 350 per mtr, complete all as specified as on drg and directed by Engr-in-charge. |
| 84 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
