|
| 1 | Taking down shutter from the frame exe 1.00 Sqm and n exc 2.0 Sqm each complete all as specified and directed. |
| 2 | S&F Factory made Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed. |
| 3 | S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified and directed. |
| 4 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed |
| 5 | M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed. |
| 6 | Taking down chowkat with shutter/without taking off shutter from the frame n exe 1.50 Sqm each complete all as specified |
| 7 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified. |
| 8 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick with particle board core, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Plain PVC sheet on the front face and 2mm plain PVC sheet on back face as per specification and drawing complete all as specified . |
| 9 | S&F 100mm size type B-21 Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized complete all as specified. |
| 10 | S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified . |
| 11 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified . |
| 12 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified |
| 13 | S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 14 | S&F factory made Z section steel ventilator with top hung shutter incl hinges, steel peg stay, with glazing bars including a shop coat Red Oxide priming including taking out old one , complete all as specified and directed. |
| 15 | S&F factory made Z section steel window / Ventilator with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete without glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 16 | M&L framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work all as specified and as directed. |
| 17 | S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed |
| 18 | M&Lfor applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed |
| 19 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 20 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 21 | S&F 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each complete all as specified and directed. |
| 22 | S&F figured glass, pin head type 4 mm thick in squares n.exc 0.50 Sqm in each pane etc complete all as specified and directed. |
| 23 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 24 | M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed |
| 25 | Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etccomplete all as specified and as directed. |
| 26 | M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified. |
| 27 | M&L 10 mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces without using extra cement complete all as specified |
| 28 | M & L for preparation of new plastered surfaces and applying two coats of colour wash over new plastered surfaces complete all as specified and as directed |
| 29 | M&L for Finishing new plastered surface with two coat of Acrylic Smooth exterior paint of required shade including preparation of new surface complete all as specified. |
| 30 | M & L two coat of oil bound distemper on new unplastered wall Surface over a coat of chalk whitening including preparation of new surfaces complete all as specified |
| 31 | Demolition of cement concrete inground floorand paving n exc 15cm thickness (below or above ground floor) complete all as specified and directed. |
| 32 | M&L for 40 mm thick PCC type B-0,1:2:4 (using 12.50mm graded aggregate) as finished even and smooth without using extra cement surface complete all as specified and as directed |
| 33 | M&L for Hardcore of Broken bricks gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed |
| 34 | M&L for 38mm width and 3.0mm thick glass dividing strips complete all as specified and as directed. |
| 35 | M&L for 75 mm thick PCC type C- 1,1:3:6 (using 20mm graded aggregate) as in plinth protection or path finishes the smooth surface complete all as specified |
| 36 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 37 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor and joints are filled with grey pigment cement and pigments laid over 15mm thik screed bed in CM 1:6 complete all as specified |
| 38 | M&L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc.of Cross section exc 25 Sqcm and n exc 50 Sqcm complete all as specified and as directed. |
| 39 | S& F in repair 110mm bore , for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laidin trenches or in floors complete all as specified and as directed |
| 40 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 41 | M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single component acrylic polymer modified, finished even and fair without using extra cement complete all as specified and as directed. |
| 42 | M&L for clearing of plastered roof surface & applying one coat of cold bitumenous primer @ 1.20kg per sqm conforming to IS 3384-1986, and applying a layers of APP based polymeric membrane, 3mm thick (minimum) weight 3.00 Kg/sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) shall be applied over Bitumenious primer (Application of polymerie memberane shall be by torch application, over laps shall be minimum 100mm on the transverse direction & 75 mm on the longtudinal direction) coved fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junction ofroof& other vertical surfaces applying one coat of aluminium paint over the APP nmodified membrane @ 0.11 kg/sqm all as speciied. |
| 43 | M&L for one coat of synthetic enamelled paint on steel surfaces over 10 cm width or girth including preparation of old surfaces. |
| 44 | Demolition of precast reinforcement cement concrete in ground floor and paving n.exc 15 cm thickness (below or above ground level). |
| 45 | M&L for Providing Precast cement concrete in cover slab for drain and similar articles with plain faces in set with CM 1:1.5:3 type B1 using 20mm graded aggregate complete as specified. |
| 46 | M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confroming to Fe500 |
| 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 48 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles complete all as specified |
| 49 | M&L for glazed ceramic coloured tiles 300x200x7 mm thick on skiriting/ dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles complete all as specified |
| 50 | M&L for preparation of old painted surface applying one coats of oil bound distemper white or tinted on old wall surface complete all as specified |
| 51 | M & L for a coat of white wash on wall surface including preparation of old surfaces complete all as specified |
| 52 | M & L for a coat of white wash on ceiling or chajjas including preparation of old surfaces complete all as specified |
| 53 | M&L for Finishing walls with a coat of Acrylic Smooth exterior paint of required shade including preparation of old surface complete all as specified. |
| 54 | Supply & Fix in repairs vitreous china squatting pan \\" Orissa Pattern\\" size 580 x 440 mm white with integral foot rest including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) complete all as specified |
| 55 | S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes complete all as specified |
| 56 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) |
| 57 | S&F in repairs vitreous china wash basin, white, flat back, size 450x300m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified . |
| 58 | S&F low density polythene (LDPE) pins of pressure rating 6 Kg/Sq cm bore of tube 32 mm for waste pipe of WHB sinks etc.complete all as specified |
| 59 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed . |
| 60 | S&F in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified |
| 61 | S&Fin repair for 600X450mm long bevelled edge mirror of selected quality glass mounted on 6mm thick AC building borad or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers all as specified . |
| 62 | S&F in repair 15 mm stop valves (angular type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed . |
| 63 | S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 64 | S& F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified . |
| 65 | Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed |
| 66 | Taking up or down, steel tubing 15mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed |
| 67 | Supply and fix 25mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe incl taking down old one all as specified . |
| 68 | Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe incl taking down old one all as specified . |
| 69 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500ltrs etc complete all as specified . |
| 70 | S&F rotational moulded polythylene water storage tank (Cylendrical ,vertical with closed top) hoisted and fixed in position capacity 500 Ltrs all as specified in SSR Part-I complete all as specified and as directed |
| 71 | S&F ball valves of 20 mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed complete all as specified and as directed(Minimum weight 20 gms-210 gms) |
| 72 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details. Please Enable Macros to View BoQ information |
