|
| 1 | Demolition of brick work/PCC Block masonry or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc as directed by Engr-in-Charge. |
| 2 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided , including removal of debries to Outside MD Land , complete all as specified and as directed. |
| 3 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.. |
| 4 | M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 5 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc including removal of debries to Outside MD Land , complete all as specified and as directed . |
| 6 | M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of PCC block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge. |
| 7 | Extra forming fair finished drain or channel 60 cm inner girth in cement concrete using extra cement including forms, moulds, mi-tried/ stopped ends etc. complete all as specified and as directed. |
| 8 | M & L for cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) as in copings as directed |
| 9 | Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for all as specified and as directed. |
| 10 | M&L for MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, Beams, cover slabs, in pre cast works, etc, by hooking ends and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. |
| 11 | M&L for providing pre cast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate for landing, cover slabs (for man holes etc ), shelves and similar work including dismantling of old cover slab of any description all as specified and directed. |
| 12 | M&L 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate for as in sub base complete all as specified and directed. |
| 13 | M&L for Providing and laying 60mm thick factory made Rubber moulded chamfered edge cement concrete coloured paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 14 | M&L 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate for flooring, Hardstanding, Pavings surface finished fair and even complete all as specified and directed. |
| 15 | M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in sub-floors/sub base all as specified and directed by Engr-in-Charge. |
| 16 | M&L for Rubber moulded Chequered cement concrete coloured tiles 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed in cement mortar 1:6, including demolition of old tiles all as specified and directed by Engr-in-Charge. |
| 17 | S&F Stainless steel letters SS (304 Grade) in repairs of any description over wall/ wall Granite slab / ACP Panel size 100mm to 150mm, including fixing with screws/adhesive and filling of hollow portion , etc., and removing of existing old letters, complete all as specified and directed. |
| 18 | S&F Stainless steel letters SS (304 Grade) in repairs of any description over wall/ wall Granite slab / ACP Panel size 150mm to 300mm, including fixing with screws/adhesive and filling of hollow portion, etc., and removing of existing old letters, complete all as specified and directed. |
| 19 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 20 | M & L for 20 mm thick, Machine cut polished kota stone slab flooring over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting rubbing and polishing to give mirror finished polished surface etc completed all as specified. |
| 21 | M & L for 20 mm thick polished Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified. |
| 22 | M&L for preparation and painting of lines, dashes, arrows and letters etc on old painted concrete / Bituman surfaces of n exceeding 10 cm width with road marking paint with one coat of Aqua Water based (any colour) (proportion as per manufacturer's instruction), marking edges of paint straight in line by road marking machinery all as specified and as directed by the Engineer-in-charge. |
| 23 | M&L for Preparation and painting of lines, dashes, arrows and letters etc on old painted concrete / Bitumen surfaces exceeding 10 cm width with road marking paint with one coat of oil-based any colour marking edges of paint straight in line by manually/road marking machinery, all as specified and as directed by the Engineer-in-charge. |
| 24 | M & L for preparing old plastered or unplastered surfaces on walls/ceiling including cornices and applying two coat of cement base paint including filling cracks/undulated surfaces with wall care putty wherever required complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
