|
| 1 | BUILDING WORK |
| 2 | M&L PCC 1:4:8 Type D2 (Using 40 mm graded stone aggragate) as in fdn, filling and mass concrete complete all as specified. |
| 3 | Anti termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified. |
| 4 | Anti termite treatment for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified. |
| 5 | M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified. |
| 6 | Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified. |
| 7 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns,slabs, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified. |
| 8 | All as per item No 07 above but for 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.6 to 8mm dia complete all as specified. |
| 9 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and plinth beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter with rough finish flat surface complete all as specified. |
| 10 | M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified. |
| 11 | M&L form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvves including supports overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified. |
| 12 | M&L Formwork to sides of pillars, posts, struts, piers,columns, and stanchions, etc finish with rough finish flat surface complete all as specified. |
| 13 | M&L form work to chullah hoods, chajjas, troughs and similar items including edges finish with rough finish flat surface complete all as specified. |
| 14 | M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces complete all as specified. |
| 15 | M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 16 | M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified. |
| 17 | M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in roof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. |
| 18 | All as per item No 17 above but as in Chajjas. |
| 19 | All as per item No 17 above but as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 20 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified. |
| 21 | M & L 25mm thick cement concrete type B-0,1:2:4 using 12.5mm graded stone aggregate and finishing cement concrete surface even and smooth without using extra cement complete all as specified. |
| 22 | M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair complete all as specified. |
| 23 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair complete all as specified. |
| 24 | M&L rendering 5mm thick plaster for ceiling on concrete surfaces in CM (1:3) including finish even and smooth with out using extra cement complete all as specified. |
| 25 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.cluding preparation of newly plaster surface over 2mm thick wall putty complete all as specified. |
| 26 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over 2mm thick wall putty complete all as specified. |
| 27 | M&L three coat of white wash on ceiling surface including preparation of newly plaster surface complete all as specified. |
| 28 | M&L 75 mm of thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection and finish even and smooth surfaces without using extra cement complete all as specified. |
| 29 | M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over one coat of redoxide primer area Exc 10 cm width or girth complete all as specified. |
| 30 | S & F Steel window with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded complete all as specified. |
| 31 | S & F Steel window with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded complete all as specified. |
| 32 | S & F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified. |
| 33 | M & L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe-290 (Gde E-165) complete all as specified. |
| 34 | S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified (Note : concrete (1:3:6) type C-0 back filling in frame is included in same item) complete all as specified. |
| 35 | M&L 30mm thick Flush shutters, solid core construction , with block board core and plywood face panels, commercial type on both sides including both face is covered with decorative face veneer with lipping/frame to matchThe shutter shall be fitted to chowkhats complete all as specified. |
| 36 | S&F 30mm thick second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I. The shutter shall be fitted to chowkhats complete all as specified. |
| 37 | S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified. |
| 38 | S & F Sheet glass ordinary quality and glazing with oil puttyin square n.exc 0.50 sqm in each pane in 3 mm thickness complete all as specified. |
| 39 | S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube complete all as specified. |
| 40 | S & F factory made solid panel PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the ms frame welded/ sealed & rail with suitable PVC sheet beading, and joined together with solvent cement complete all as specified. |
| 41 | S & F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified. |
| 42 | S & F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified. |
| 43 | S & F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified. |
| 44 | S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 45 | Preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 46 | M&L PCC 1:2:4 type B1using 20 mm graded stone aggregate as in coping including necessary formwork complete all as specified. |
| 47 | M & L for Screed bed or bedding layer 15mm thick in cement mortar 1:4 with WPC on roof surfaces complete all as specified.(Note : WPC shall be supplied and paid separately) |
| 48 | M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt complete all as specified |
| 49 | S&F stainless steel drapery rod 20 mm dia complete all as specified. |
| 50 | S&F Stainless steel fancy type brackets and finials for drapery rod decorative type complete all as specified. |
| 51 | Supply & Fixing for steel water tubing, galvanised, medium grade ISI markedwith all fittings and fixed complete to walls & ceiling or laid in floors or concealed in walls etc of size of tubing 15 mm bore complete all as specified. |
| 52 | All as per item No. 51 above, but 20 mm bore complete all as specified. |
| 53 | S&F CP fancy type angular stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe for 15mm bore pipe complete all as specified. |
| 54 | S & F PVC connections 15mm size with brass nuts of length 450mm for hot and cold water complete all as specified. |
| 55 | M&L coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick plaster in cement mortar (1:4) complete all as specified. |
| 56 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 57 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar (1:4) complete all as specified. |
| 58 | S & F Bib taps fancy type chromium plated long body cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body,15 mm complete all as specified. |
| 59 | S & F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified. |
| 60 | S & F vitreous china squatting pan, 'Orissa' pattern size 580x 440mm white, with integral foot rests ( excluding flushing cistern and flush pipe ) complete all as specified. |
| 61 | S&F wash hand basin vitreous china white (flat back) of size 550x400mm including pedestal CI bracket,32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc complete all as specified |
| 62 | S & F Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15 mm bore complete all as specified. |
| 63 | S & F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement fixed in cement concrete type B1 1:2:4 complete all as specified. |
| 64 | S&F Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' of size 150 x100 mm, setting and jointing with solvent cement complete all as specified. |
| 65 | S & F bevelled edge mirror of selected quality glass 600x450mm size mounted on 6mm thick AC building board chromium plated brass screw and cup washers and fixed etc complete all as specified. |
| 66 | S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets complete all as specified. |
| 67 | M & L for Concrete bed PCC 1:3;6 type C2 to110 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified. |
| 68 | S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls ( Joining to be done with solvent cement ) including PVC brackets complete all as specified. |
| 69 | S & F PVC (SWR) 110 mm vent cowl complete all as specified. |
| 70 | S & F for 75/110 mm dia PVC (SWR) bends any radius complete all as specified. |
| 71 | S & F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 72 | M&L for providing circular,raised platform of hight 20 cm below the tank and base dia 25 cm more than the external dia of tank for pvc cylendrical tank of capicity 500 liters using pcc 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc complete all as specified. |
| 73 | S & F 20mm bore Ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified. |
| 74 | Supply only water proofing compound complete all as specified. |
| 75 | ROAD/PATH/CULVERTS |
| 76 | M&L Hardcore of guage exc 63mm but n exc. 100 mm of broken stones or boulders , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified. |
| 77 | M & L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub floor/Sub base etc, complete all as specified. |
| 78 | M&L for 25 mm thick, sand for filling under floors, spreading and levelling in layers 25 mm thick including watering and consolidation complete all as specified. |
| 79 | M&L for 60 mm thick, machine pressed precast concrete interlocking paver block with grey cement and no pigment of any shape and size as approved by GE, confirming to IS 15658-2006, M-35 Grade over and including 25mm thick sand cushioning & filling and joints complete all as specified. |
| 80 | M&L for machine factory made PCC block (1:2:4) type B1 using 20 mm graded stone aggregate, as in kerb stone of size 300 x 300 x 150 mm set in cement mortar (1:4), complete all as specified. |
| 81 | AREA DRAINAGE |
| 82 | M&L for PCC type D2 (1:4:8) using 40 mm graded crushed stone aggregate as in foundation, filling/ bed/ mass concrete complete all as specified. |
| 83 | M&L for Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius, built in cement and sand mortar (1:4) complete all as specified. |
| 84 | M&L for PCC type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in benching, copings, bed plates, kerbs and the like including weathering slightly rounded or chamsfered angles, throating etc. including necessary formwork, complete all as specified. |
| 85 | M&L for PCC type C-1 (1:3:6) using 20mm graded stone aggregate in surface channels & drains, complete all as specified. |
| 86 | M&L for Rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified. |
| 87 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified.Note : Inner girth only measured. |
| 88 | All as per item No 87 but add or deduct for each 25 mm girth or part thereof over or under 30 cm, complete all as specified. |
| 89 | SEWAGE DISPOSAL |
| 90 | S&F 150 mm dia Reinforced concrete pipe Class NP-2 with one collar per length joint with CM 1:1 with spun yarn and complete tested complete all as specified. |
| 91 | M&L for cement concrete 1:3:6 type C-2 (using 40 mm graged stone aggregate) as in concrete bed of drain pipes including packing under, and haunching against the sides of pipes after they are laid, jointed and tested for 150 mm bore drain pipe, complete all as specified. |
| 92 | M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in foundation, filling and mass concrete bed of manholes, complete all as specified. |
| 93 | M&L for Brickwork with sub-class ‘B’(old size) burnt clay bricks straight or curved on plan exc 6 metre mean radius built in CM 1:4, complete all as specified. |
| 94 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping, bed blocks, benching and like incl necessary formwork, complete all as specified. |
| 95 | M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channels, drains, complete all as specified. |
| 96 | Extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms,moulds, mitered/stopped etc complete all as specified. (Note: Inner girth shall only be measured) |
| 97 | Add to or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement including forms, moulds, mitered/stopped etc complete all as specified. |
| 98 | M&L Rendering 15 mm thick in on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC (powder) @ 2% by weight of cement complete all as specified. |
| 99 | Supply only integral water proofing compound ISI Marked complete all as specified. |
| 100 | M&L PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in precast cover slab (for manhole etc incl all use of forms, mould or machine moulds and setting the blocks, slabs etc in cement mortar 1:4, complete all as specified. |
| 101 | M&L for MS TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
| 102 | Supply and fixing of FRP septic tank for 100 users designed to carry sewage and sullage water excavation in any type of 150mm thick PCC 1:4:8 below foundation,vent shaft, connection pipe for inlet and outlet of any dia etc as per manufacturer instruction complete all as specified. Invert level of inlet shall be 600mm below GL Manufacturer: Green India Faridabad, Kusum Anand energy Faridabad, Saifi Enterprices Gaudam Budh nagar. |
| 103 | Provn of Sokage well, excavation in ordinary soil, foundation in PCC 1:3:6 wall of honey combed masonry with top ring of M-25 concrete, including intercepting chamber, screen chamber brick work in CM 1:6, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.6 meter dia and 4.50 meter effective depth, complete all as per TD No.: CEJZ/2004/TD/S-35. |
| 104 | COMPOUND WALL, FENCING AND GATE |
| 105 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation of posts and struts, foundation, filling and mass concrete etc. complete all as specified. |
| 106 | M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6 complete all as specified. |
| 107 | M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 50 mm thick (measured solid), including all mouldings but excluding frame complete all as specified. |
| 108 | Providing precast ce- ment concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling).corbels, brackets, etc. (of any section indicated), with plain fair faces,including cham fers, weatherings,throat- ing etc. and setting in mortar complete with joints to match complete all as specified. |
| 109 | M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified. |
| 110 | M&L for preparation of new surface and applying two coats of cement base paint of approved shade on walls over one coat of water based white pigmented alkali resistant priming paint complete all as specified. |
| 111 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 112 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified. |
| 113 | INTERNAL ELECTRIFICATION |
| 114 | Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with continuous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed rigid PVC conduit(ISI marked) ,duly cutting chases & concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) including metal flush box made of GI sheet and white cover complete all as specified for the following.Note: Flush box and cover plate should be of same make all as approved for switches/sockets. |
| 115 | One light/fan/bell point controlled by one No modular type switch 6 Amps single pole one way complete all as specified. |
| 116 | One 3 pin 6 Amps socket outlet on same board controlled by one, one way 6 Amps modular switch complete all as specified. |
| 117 | One socket outlet 5/3 pin 6 Amps controlled by one modular switch on independent board complete all as specified. |
| 118 | All as per item No 114 above but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLSH but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLSH cable as earthwire. |
| 119 | S & F switch Modular single pole, one way 6 Amps , 1 module, 230 volts, 50 hz complete all as specified. |
| 120 | Supply and fix Modular switch 1 way 16 Amps, 1 module, 230 volts, 50 Hz complete all as specified. |
| 121 | Supply and fix Modular Socket outlet, 6A - 2/3 pin combined, 2 module ISI marked, 230 volts, 50 hz complete all as specified. |
| 122 | Supply and fix Modular Socket outlet, 16A - 2/3 pin combined, 2 module ISI marked, 230 volts, 50 hz complete all as specified. |
| 123 | Supply & fixing fancy lamp holder, insulated body ISI marked with back plate for batten fitting complete all as specified. |
| 124 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified. |
| 125 | S&F MCB DB SPN 4 way, 240 volts in sheet steel enclosure.double door type complete all as specified. |
| 126 | S&F MCB DB TPN 4 way with 200 Amps 415 volts rated copper busbar in sheet steel enclosure.double door type complete all as specified. |
| 127 | S&F MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified. |
| 128 | S&F MCB, SPN, AC, 240 volts of 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified. |
| 129 | S&F MCB, TPN, AC, 415 volts of 40-63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified. |
| 130 | Supply and fixing LED mirror light fitting with high out put with low energy consumption of capacity 6 watt,waterproof moisture anti-fog anti-corrosion anti-rust,curved LED off-white including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. |
| 131 | Supply and fixing sensor based 20 watt LED tubelight fitting batten type 4 X feet long with rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified. |
| 132 | S& F surface mounted LED luminiare, 20 watt, 4 Feet with all accessories having aluminum extruded channel with diffuser for glare free light, high lumen output, driver PF >0.90 having over voltage protection upto 400 volts and lumen efficiency >120 lumen per watt, internally pre-wired through flexible wire connecting with ceiling rose complete all as specified. |
| 133 | S & F LED Bulb 10 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for \\"B-22 type to fix on batten holder complete all as specified. |
| 134 | S&F ceiling fan (white) of 1200 mm sweep, 5 star rating copper wound with super energy efficient BLDC motor including remote,connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor canopy set, down rod, shackle kit, including all standard accessories complete all as specified. |
| 135 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300msweep with, blades, and frame and louvers complete all as specified. |
| 136 | Supply and fix LED building security light 1 x 25 W housing made out of pressure die-cast aluminium alloy with toughned glass, IP 66 protection working on 240 volts, 50 Hz, consisting of reflecting lamps wired with appropriate driver PF> 0.95 having over voltage protection upto 440 volt, surge protection level > 10 KV, thermal short circuit protection THD< 10% made up of long life LED chip (SMD) in modular with Ra< 70, beam angle along the drive way, 120 degree, beam angle across the drive way, 80 degree luminaire efficiency> 120 luminous /watt power LED should be of more than 01 watt CCT should be between 5700° K- 6500° K including fixed on wall with 1.2 mtr 32 mm GI pipe bracket & 02 Nos MS clamp made out of F1 40 x 6 mm or as directed including connecting with 1.5 sqmm , 3 core, PVC insulated copper conductor cable 1100 Volt grade from ceiling box to light complete all as specified. (i) The firm has to given warranty of street light fittings including driver minimum for 03 years for any defect developed during the period. (ii) The contractor Shall submitt the third Party LM 79 report from any NABL approved laboratory (iii) The fiitting should have BIS , CRS No(iv) Connection to luminaire shall be done in suitable PVC connector within the bracket/luminaire end and are inclusive in above. |
| 137 | S&F sub main wiring two single core 4 Sqmm PVC insulated, unsheathed, stranded copper conductor cable(FRLSH) 1100Volts grade drawn in & including rigid PVC Conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sqmm PVC insualted unsheathed copper conductor cable (FRLSH) as earth wire and wire connected with main earth dolly including cutting chases and making good disturbed portion complete all as specified. Note : Two runs of phase, neutral wire and one run of earth wire and PVC conduit will be measured as one RM or one length. |
| 138 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4mm GI Wire check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified.Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 139 | S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts complete all as specified. |
| 140 | M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc asrequired of size 4mm dia galvanised iron or steel wire complete all as specified. |
| 141 | WATER HEATER/COOLING APPLIANCES |
| 142 | Supply and fix water cooler electric driven (single phase), having approx storage capacity of 120 litre and nominal cooling capacity of 60 Litres per hour complete all as specified. |
| 143 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3.0KVA complete all as specified. |
| 144 | Supply, fixing and fabrication and testing desert cooler in GI body sheet with and including cooler fan motor size/sweep 450mm (fan blade only) 230 Volts, Single phase 50 Hz, 1400 RPM, heavy duty single sheet, totally enclosed. The overall dimesnions of the desert cooler shall not be less than 690mmx690mm x 1020mm with and including following accessories each complete all as specified. |
| 145 | (a) Air grill of suitable size made out of 0.5mm PGI sheet including GSS arrangement with a knob for easy and smooth movement.(b) Front & Side panel made out of 1mm thick PGI sheet of suitable size and shape.(c) Water tank height shold not less than 11 inch made out of 2mm thk PGI sheet.(d) Submersible pump electric driven single phase 230 volts, 50 Hz of suitable discharge and head but motor capacity not less than 18 watt. Make : Khaitan/Crompton or equivalent make.(e) Service cord of 3 Core copper wire 1.5 Sqmm with plug top 5 Amp length not less than 3 metres.(f) Electronic fan dimmer 1000 watts AC 230 Volt for controlling the fan speed.(g) Complete electric wiring of desert coolers as required to operate fan and pump along with 5 Amp switches.(h) Make of cooler fan motor: Khaitan/ Havells/Crompton Greaves/Marathon/Almonard(j) Make of PGI sheet. Tata/Jindal/SAIL |
| 146 | M&L for fixing and grouting of MS Stand (adjustment type) suitable for desert cooler of above said size made out of angle iron section of size 40 x 40 x 5 mm with suitable size of fasteners on ground floor in windows of rooms, complete with two coats of synthetic enammled black paint over a coat of red oxide primer complete all as specified. |
| 147 | Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm dia ( for desert cooler) complete all as specified. |
| 148 | Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm dia.(for desert cooler) complete all as specified. |
| 149 | Supply and fix Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed conforming to IS 9338, complete of size 20 mm dia pipe complete all as specified. |
| 150 | Supply and fix stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for 15mm bore pipe complete all as specified. |
| 151 | Supply and fix PVC connection 15 mm size with PTMT nuts of length 750 mm complete all as specified. |
| 152 | EXTERNAL ELECT SUPPLY |
| 153 | Supply and lay XLPE insulated, screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade (earthed) cross sectional area 25 Sqmm, 4 core incl suitable size of lugs for connection in LT Panel complete all as specified.Note : The earth work, GI pipe & Clamp for suitable size to hold the cable on wall shall be measured and paid separately under appropriate item of Sch A |
| 154 | M&L for cable protection bricks common burnt clay sub class B designation 75 for protectioon of UG Cable laid in trenches complete all as specified. |
| 155 | M&L for 50 mm bore GI tube light grade laid under road/culvert/drain fixed to pole wall with help of flat iron clamps etcfor cable protection and making good surface of road with PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as specified. |
| 156 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 25x4mm GI strip as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 40 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified.Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 157 | EXTERNAL WATER SUPPLY |
| 158 | S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 25 mm bore complete all as specified. |
| 159 | M&L of gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 25 mm bore complete all as specified. |
| 160 | M&L of MS clamp /saddle piece made out of MS flat iron suitable to make ferrule and clamping for branch connections complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe including drilling as per site requirement complete with MS nuts, bolts, washers and rubber packing for complete of size 40 to 80 mm dia pipe complete all as specified. |
| 161 | EARTH WORK AND EXCAVATION |
| 162 | Surface dressing n exc 15 cm deep and getting out in soft/loose soil complete all as specified. |
| 163 | Excavation in trenches n.exc 1.5m wide & n.exc 1.50m in depth for foundation , etc or for shafts, wells, cess pits, man holes,pierholes etc n. exc 10 sqm on plan & getting out in soft/loose soil complete all as specified. |
| 164 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm under floors and in trenches complete all as specified. |
| 165 | Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified. |
| 166 | Surface excavation n.exc 30cm deep and average 15 cm deep and getting out in soft/loose soil, complete all as specified. |
| 167 | M&L for sand cushioning for under ground cable with layer of fine river dry sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified.Note:- Punned (consolidated ) thicness of sand will be measured and paid. Please Enable Macros to View BoQ information |
