|
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed. |
| 2 | S&F Galvanised MS sheeting of 0.63 mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall all as spd and complete all as specified and directed. |
| 3 | Refixing Galvanised MS sheeting of 0.63 mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall all as spd and complete all as specified and directed. |
| 4 | S&F Plain, galvanised, mild steel sheeting of 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as spd and complete all as specified and directed. |
| 5 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.(camouflage pattern) complete all as specified and directed. |
| 6 | M&L for preparation of Old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.(camouflage pattern) complete all as specified and directed. |
| 7 | Demolition of Brickwork or stone/ boulder masonry built in cement mortar complete all as specified and directed. |
| 8 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width set in cement mortar 1:4 type C1 1:3:6 (20mm graded aggregate), complete all as specified and directed. |
| 9 | Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 10 | M&L for Rendering 10mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 11 | M&L for Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 12 | M&L for preparing newly plastered or pointed surface of wall and applying two coats of distemper over a coat of primer complete all as specified and directed. |
| 13 | M&L two coats cement base paint over a coat of white wash including preparation of newly plastered wall surfaces complete all as specified and directed. |
| 14 | Demolition of unnreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 15 | Demolition of brickwork or block masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 16 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar,set in cement mortar1:4,type 1:3:6 complete all as specified and directed. |
| 17 | M&L for PCC 1:2:4 type B1 using 20mm graded crushed aggregate 100 mm thick complete all as specified and directed. |
| 18 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound with Grade 'A' complete all as specified and directed. |
| 19 | M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 100mm thick slab complete all as specified and directed. |
| 20 | Dismantling of RCC Post any section embadded in concrete, brick masonary complete all as specified and directed. |
| 21 | Excavation in post holes ( or similar holes) each not exceeding 0.50 cubic meter in Hard/ dense soil , getting out, retruning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a dsitance n.exc 50 mtr and making good surface complete all as specified and directed. |
| 22 | Material and labour PCC ( 1:3:6) type C-2 using 40mm graded stone aggreage in fdn filling amd mass concrete complete all as specified and directed. |
| 23 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 24 | Dismantling of steel barbed wire of any thickness and in any position, complete all as specified and directed. |
| 25 | Supply only Chain link MS galvnised fencing , any size or type, complete all as specified and directed. |
| 26 | Labour for Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire,complete all as specified and directed. |
| 27 | M&L for round bars 10mm dia ( Fe-410-W Gde.E-250) quality-A or Fe 290 (Gde E-165)and over cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire as in straightening bars for chain link fencing ( annelaed) not less than 0.9 mmd ia or securing with clips complete all as specified and directed. |
| 28 | S&F in repair Steel rolling shuttersof 1.25mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 29 | M&L for preparation and applying two coats of synthetic enamel paint on new surface of steel and iron surfaces any description over 10 cm width or girth including prepration of surface all as per specifed complete all as specified and directed. |
| 30 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 31 | S&F Ball bearing for rollings hutters complete all as specified and directed. |
| 32 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
