|
| 1 | Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key, scrubbing down with water etc all as specified and as directed |
| 2 | Demolition of brick work or stone/ boulder masonry/ PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc. |
| 3 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 4 | M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in copings, kneelers, including weathering, slightly rounded or chamfered angles and throating, including necessary formwork as directed. |
| 5 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement |
| 6 | M&L for rendering 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed. |
| 7 | M&L for rendering 10 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed. |
| 8 | M & L applying two coats of OBD over a coat of primer on newly plastered wall surfaces iover 2 coat of wall care putty preparation of surfaces all as specified and as directed. |
| 9 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash. |
| 10 | M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls. |
| 11 | Supply only integral water proofing compound |
| 12 | M&L for preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white washincluding scaffolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 13 | M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls including scaffolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 14 | M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scaffolding at any height complete all as specified and directed by Enggineer-in-charge.. |
| 15 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) including scaffolding at any height complete all as specified and directed by Enggineer-in-charge.. |
| 16 | M&L for complete removal of existing treatment and prepartion of surfaces including filling the cracks if any on surfaces of walls and applying two coat of acrylic distemper over a coat of primer over a coat of putty including scaffolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 17 | M&L for prepartion of new plastred surafce and applying of two coat of exterior emulsion paint colour as approved as GE, using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces, edges of slab, roof/chajja projection ana column etc., after necessary preparation all as specified and as directed. |
| 18 | M&L for application of one coat of exterior emulsion paint colour as approved as GE, using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces, edges of slab, roof/chajja projection ana column etc., after necessary preparation all as specified and as directed. |
| 19 | M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scaffolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 20 | Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes |
| 21 | Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m all as specified and as directed. |
| 22 | S&F light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 . |
| 23 | S&F light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed. |
| 24 | S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) size of each tiles 400x400 mm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 |
| 25 | M&L for Glazed ceramic coloured tiles in vertical surface 350*250*7 /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed. |
| 26 | Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors aprons etc. |
| 27 | M&L for machine cut kota stone flooring 18-20 mm thick over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc as directed by Er-In-Charge. |
| 28 | M&L for machine cut kota stone slab 18-20 mm thick in riser of steps,skirting,dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed. |
| 29 | M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base or plinth protection all as directed. |
| 30 | M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface. |
| 31 | Providing and laying rubber moulded glossy finish 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete |
| 32 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 33 | Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed. |
| 34 | Taking down of shutters of any description not exceeding 1 sqm each all as specified and as directed. |
| 35 | Taking down of chowkat with shutter without taking off shutters from the frame, not exceeding 1.5sqm each all as specified and as directed. |
| 36 | Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed. |
| 37 | M&L for re-fixining same opening of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed. |
| 38 | S&F IInd class hard wood plain solid, straight ,chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed. |
| 39 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel Squartube with singal side prelam PVC sheet used instead of plain colour PVC sheed & edges will be painted to match with prelam sheet & fixed in position as per manufacturer's instruction all as specified, as shown on drawing on page No 160 of SSR Part-II 2010 |
| 40 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010 |
| 41 | M&L for 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite. |
| 42 | S&F Aluminium framed windows any pattern, fixed/side hung/silding ( three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, glazing all as specified Note-: (glazing shall be measured and paid separatly) |
| 43 | S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified inSSR part-I section 8 clause 8.20 (a) fitted to chowkats . |
| 44 | S&F 30mm thick flush door shutter soild core construction with block board core and plywood face panels commercial type on both sides . |
| 45 | Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed. |
| 46 | Ditto all as per item No 45 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed. |
| 47 | S&F sheet glass ordinary quality 4 mm thick with oil putty exceeding 0.5 sqm in each pane all as specified and as directed. |
| 48 | Ditto all as per ser item No 47 above but pin head type |
| 49 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed. |
| 50 | Ditto all as per ser item No 49 above but fixed in repair to steel/wooden shutters |
| 51 | S&F butt hinge, stainless steel 100mm long all as specified and as directed. |
| 52 | S&F butt hinges stainless steel 75mm long all as specified and as directed. |
| 53 | S & F in repairs Continuous (Piano) hinges, stainless bright finished or electro galvanized, width of flaps (When open) 30 mm |
| 54 | S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed. |
| 55 | S&F Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed. |
| 56 | S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed. |
| 57 | Ditto all as per ser item No 56 above but 150mm long |
| 58 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm long |
| 59 | Ditto all as per ser item No 58 above but 100mm long |
| 60 | S&F hasp and staple, safety type aluminium anodised with hinge pin including bolt to hing plate and fixed with screw 125 mm long all as specified and as directed. |
| 61 | M&L for mild steel frame work such as grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 or Fe 310-0 and taking down old one . |
| 62 | M&L for preparing new surfaces of wood of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 63 | Ditto all as per ser item No 62 above but on steel surfaces over red oxide primer |
| 64 | S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and taking down old one all as specified and as directed. |
| 65 | S & F of stainless steel curtain rods of dia 20mm and thickness of 1mm including brackets etcall as directed in repairs. |
| 66 | M&L for welding in repairs n exc 2.5cm in length n exc 6mm thick all as specified . |
| 67 | M&L welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed. |
| 68 | S&F Pressed steel frames for doors with one or more rebates of size 125 x 60mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as pecified, supplied and fixed |
| 69 | Dismantling boarding, any description, fixed in wall or ceiling, any position with nails |
| 70 | S&F 18/19 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions and fixed in repairs. |
| 71 | S&F 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved , fixed with approved adhesive as per manufacturer's instruction |
| 72 | S&F GI snap grid frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specified as per manufacturere's instructions and all as directed. |
| 73 | S&F 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed |
| 74 | S & F in repair vitreous china wash basin, white back, size 500 X 400 mm x 190 mm, errecting on existing CI brackets including taking down old one alll as specified and as directed. Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor. Make of parryware Code :Flair C0476 or others equivalent in jaquar and Hindware |
| 75 | S&F in in repair vitreous china squatting pan of orrisa pattern, size 580X 440x300 mm white, with integral foot rest 'P' or 'S' trap, including taking down old one complete all as specified and as directed.Make of Cera or others equivalent in jaquar and Hindware |
| 76 | S&F 10 in repair litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed |
| 77 | S&F Towel Ring of stainless steel and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms). Make of Cera Code :F5015105CH or others equivalent in jaquar and Hindware |
| 78 | S&F in repairs two way Angle cock 15mm bore fancy type chromium (concealed type) all as specified and as directed. Make of Cera or others equivalent in jaquar and Hindware |
| 79 | S&F 40mm low density polyethene pipe (LDPE) of pressure rating 6 Kg F/CmSqcm fixed complete in wall ,floor etc including taking down old one all as specified and as directed. |
| 80 | M&L for special treatment ot sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat Each of Nittoproof 120 on plastered surface rendering again 10mm thick in CM 1:4 mixed with conplast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 3.00 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge.Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE. |
| 81 | Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing or removal to store |
| 82 | Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing or removal to store |
| 83 | S&F for 15mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor |
| 84 | S&F for 20mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor |
| 85 | Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified |
| 86 | Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified |
| 87 | Disconnecting existing tanks, exc 500 n.exc 1000 Ltrs capacity setting aside for repairs, cleaning etc. and hoisting if required reconnectiong and re-fixing in position. |
| 88 | Dismantling existing PVC water tanks of capacity 500 litres & n.exc 1000 litres all as directed and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit. |
| 89 | S&F 1000 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position incl brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule all as specified and directed . |
| 90 | S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. Make of Cera Code :F1015361 or others equivalent in jaquar and Hindware |
| 91 | S&F in repairs stop valves / angle cock cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm (fancy type chromium plated).Make of Cera Code :F2002201 or others equivalent in jaquar and Hindware |
| 92 | S&F in repair 15 mm bore Fancy type sink taps (Swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.Make of Cera Code : F1003104 or others equivalent in parryware and Hindware |
| 93 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed Make of Cera Code : F1015101 or others equivalent in parryware and Hindware |
| 94 | S&F in repairs 15mm dia Chromium plated fancy type long body Bib tap cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make of Cera Code : F1015151 or others equivalent in parryware and Hindware |
| 95 | S&F bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). |
| 96 | S&F pillar taps 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) |
| 97 | S&F nipple 20mm dia suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) |
| 98 | S&F waste coupling of PTMT 40mm (half or full threaded) sutable for kitchen sink. (Minimum weight 32mm- 45gms/40mm-60 gms) |
| 99 | S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 100 | S&F in repair Chromium plated shower roses 125 mm dia size with or without swevel joints and size including fixing to steel pipe or union and 15mm bore 200mm long shower arm. Make of Cera Code : F7020305CH or others equivalent in parryware and Hindware |
| 101 | S&F shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms |
| 102 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified Make of Cera Code :F8030103 or others equivalent in jaquar and Hindware |
| 103 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 104 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 105 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 106 | S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door. |
| 107 | S&F PVC (SWR) pipes single socketed, 75mm dia in any length with rubber ring joints, laid in trenches or in floors |
| 108 | S&F PVC (SWR) bends any radius 75mm bore |
| 109 | S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement |
| 110 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 111 | S&F Fixing in repairs Vitreous China Half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in ce |
| 112 | S&F mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 113 | M&L for cutting of existing cracks on wall up to 10 mm deep and n exc 10 mm face and clean the groove properly and fill crack with filler materials with gunating machine up to last edge of crack in two coat and apply tow coat of wall care putty and 2 coat of oil bound distemper. |
| 114 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 500 n.exc. 1000 Ltrs capacity. |
| 115 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulationg pipe, etc. of exc. 1000 n.exc. 2000 Ltrs capacity. |
| 116 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 117 | S & F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 - W (Gde E-250)quality-A, |
| 118 | Dismantling of plain or corrugated steel sheeting and asbestos cement (corrugated semi corrugated) any gauge, thickness, including ridge all as directed. |
| 119 | S&F Pre-painted galvalume aluminium zinc coating GI based manglore pattern corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screwsaas specified etc all as directed. |
| 120 | Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as directed. |
| 121 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size mini 815mm x 455mm bowl size 355mm x 355mm x 185mm |
| 122 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m |
| 123 | Taking down and opening the existing Steel rolling shutters, not exc 12 sqm each in area as clear opeing and hood cover ,cleaning the sides guide,suspended shaft anti guide chanel, as specified including top cover, anchoring rod, hasp and staple and one coat of primer; refixing in existing position after greasing and repair in all respect as required complete: push pull or manual type |
| 124 | ditto all as per ser item no 123 above but gear operated shutter area exc 12 sqm but not exc 25 sqm each including adjustment of gear assembly |
| 125 | Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500 m from the building and depositing where complete all as specified and directed |
| 126 | Demolition of plain cement concrete (unreinforced) in ground floor including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjah top/junctions etc complete all as specified |
| 127 | M&L for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed. |
| 128 | M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- (i) Applying one coat of oil based bituminous primer @ 0.25 kg/Sq. M (ii) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures (iii) Apply two coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm over membrane over non accesble roof surfaces complete all as per manufactures instructions and as directed Please Enable Macros to View BoQ information |
