|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion Posts in Cement concrete and making good disturbed ground |
| 2 | Cement concrete 1:3:6 type C-2 usingf 40mm agg in foundation, fillings & mass concrete for Post/strut/stay assembly etc. |
| 3 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire bolting, welding etc all as specified and as directed by Engr-in-Charge. Note :- The rate including for taking down existing fencing wire mesh any type |
| 4 | S&F mild steel angle confirming to Fe-410-0 or Fe 310-0 in posts and struts in fencing including cutting tops to shape or making frames making smaller articles etc as directed, drilling holes, notching for wire etc (for securing chain link fencing) all necessary drilling, bolting, welding etc, including flat iron to angle iron post. |
| 5 | Supply only chain link MS galvanised fencing of any size and type as approved by Engr-in-Charge |
| 6 | S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and the screwed the other to be fitted with washers and one hexagonal or square but exc 5 cm but n.exc 10 cm long, dia of shank 5 to 12mm. |
| 7 | S & F mild steel round bars 10mm dia for securing chain link fencing |
| 8 | Preparation of steel Surface of any description, not otherwise descri-bed n exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide , zinc chorome primer |
| 9 | M&L for preparing new or previously untreated surfaces steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 10 | Demolition of brick work/PCC Block masonry or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc as directed by Engr-in-Charge. |
| 11 | M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of PCC block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge. |
| 13 | M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and as directed . |
| 14 | M & L for cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) as in copings as directed |
| 15 | Taking down and refixing/ restrainig or resecuring of concertina coil 600mm/900mm dia including making good staples/ fixing with GI wire of existing old complete all as specified and directed. |
| 16 | S&F concertina coil with punched tape of 600/900mm dia centre core wire shall be minimum 2.5mm dia of mild steel wire confirming to IS 280-2006 .Galvanised coating of steel concertina coil shall confirm to the requirement as laid down for medium coated wire inv IS 4826 \\"hot dipped galvanised coating of round steel wires\\" concertina coil shall be fixed in diamond shape with the help of dovetail to handle and spike shall be fixed at both end of the coil,minimum staight length of the wire 150RM of 100RM of works min weight 13.5 kg for 100 RM of works i.e 90gm/rmof wire incl dismantling all as specified and directed |
| 17 | S&F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and as directed. |
| 18 | M & L for preparing old plastered or unplastered surfaces on walls/ceiling including cornices and applying Two coat of cement base paint including filling cracks/undulated surfaces with wall care putty wherever required complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
