|
| 1 | Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars, etc, built in cement mortar complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed. |
| 3 | M&L for Cement concrete type D-2 1:3:6 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 4 | M&L for brick work with flyash bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.. |
| 5 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, n exc 10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed. |
| 6 | M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 7 | Demolition RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.. |
| 8 | M&L for RCC (Design mix M-25) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 9 | M&L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc. complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 10 | M&L for RCC (Design mix M-25) in beams, cantilevers, bressumers, lintels over 1.50 m span. complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately under respective item. |
| 11 | M&L for RCC (design mix) M-25 ( 20mm graded aggregates) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 12 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 13 | Supply only chain link fencing, of mesh size 50 X 50 mm, any width and dia of wire 4.00 mm complete all as specified and directed. |
| 14 | M & L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for securing chain link fencing complete all as specified and directed. |
| 15 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter complete all as specified and directed. |
| 16 | Use and waste formwork to sides of pillars, posts, struts, piers, columns etc square or rectangular complete all as specified and directed. |
| 17 | Use and waste formwork to sides and soffits of floor beams, roof beams , beam haunchings girders, lintels, cantilevers etc to plain surface complete all as specified and directed. |
| 18 | M&L for Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 19 | Removing excavated materials n. exc. 50 m and depositing were directed at a level n exc 1.5 mtr above the staring point complete all as specified and directed. |
| 20 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed |
| 21 | S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 22 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders complete all as specified and directed. |
| 23 | S&F framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing and incl steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete conferming to gde Fe 410-w complete all as specified and directed. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 25 | Demolition of PCC of any description and any position not otherwise provided for complete all as specified and directed |
| 26 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingover CM 10mm thick in 1:4 complete all as specified and directed. |
| 27 | M & L for complete removal of existing treatment on wall in description complete all as specified and directed. |
| 28 | M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sandind of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust etc by skilled labour as per following steps:- (1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute.(2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified and directed. |
| 29 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. as per manufacturer instructions apllied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and directed. |
| 30 | S&F in repair Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed. |
| 31 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and strainingand fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 32 | M&L for 15 mm thick cement plaster in CM 1:4 on external surfaces of fair faces of brick work or concrete surfaces with finished surfaces even and smooth with out using extra cement complete all as specified and directed. |
| 33 | M&L for 15 mm thick rendering in CM 1:4 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even complete all as specified and directed. |
| 34 | M&L preparing plastered new surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 35 | Supply and fixing in rep Concertina Coil Mild steel punched tape concertina coil with Zinc coating 450 mm dia with clips spaced 24mm dispensed in compact rolls weighing 7.5 kg/coil covering an average span of 7.5m on expansion to be laid between the 'Y' angle pickets joining by welded at 45 degree slope LAIP complete all as specified and directed. |
| 36 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified and directed. |
| 37 | S&F 10 mm thick paver tiles out door vitrified tiles area 0.20 to .50 sqm each as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 20mm thick screed in CM(1:6) complete all as specified and directed. |
| 38 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using late vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 39 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 40 | M&L for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 41 | Schedule of credit of amount Rs. 67,150.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
