|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed. |
| 2 | Supply and fix aluminium powder coated glazed or gauged shutter for sliding window/door/partition(2 or 3 track) with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel, including all necessary fittings such as rollar, joining cleats, glazing clips, rubber packing aluminium screw as required etc complete all as specified and as directed. (Note:Wiremess/ glass shall be measured and paid separately) |
| 3 | Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 4 | Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed. |
| 5 | Supply and fix 4mm thick sheet glass ordinary quality, glazing with aluminium beads in square/rectangular exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed. |
| 6 | Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work complete all as specified and as directed. |
| 7 | Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed. |
| 8 | Roughnening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust ,etc complete all as specified and directed. |
| 9 | Material and labour for Light shade Vitrified tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. |
| 10 | Material and labour for Light shade Vitrified tiles 8 to10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 11 | Demolition of reinforced cement concrete as in roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors(reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 12 | Material and labour for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 14 | All as per item no 13 above but 6mm dia to 8mm dia complete all as specified and directed. |
| 15 | M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars,window - cills, cooking plateforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 16 | M&L for use and waste of formwork to edges of concrete roof slabs and chajjas n exc 20cm wide complete all as specified and directed. |
| 17 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 18 | Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and smooth w/o using extra cement complete all as specified and as directed. Note :- WPC shall be measured and paid separately. |
| 19 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 20 | Supply only integral water proofing liquid admixture for cement mortar complete all as specified and directed. |
| 21 | Material and labour for rendering 5mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for applying applying two coats of oil bound distemper over a coat of alkali resistant primer to newly plastered surface of wall including preparation of the surface complete all as specified and as directed. |
| 23 | Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 24 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 25 | M&L for applying 1.50mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to ceiling complete all as specified and as directed. |
| 26 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed. |
| 27 | Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 28 | Supply and fix in repairs pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed. |
| 29 | Supply and fix in repairs pre laminated particle board 18/19 mm thick, interior grade one side decorative choice lamination & other side balancing white lamination fixed in cup boards shelves with front side 6mm thick teak wood lipping/edging complete all as specified and as directed. |
| 30 | Supply and fix 100mm long hasp and staple, safety type, brass with mild steel hinges pin including bolt to hinge plate and fixed with brass screw complete all as specified and as directed. |
| 31 | Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc.complete all as specified and as directed. |
| 32 | Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 2mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as per manufacturers instruction complete all as specified and directed. |
| 33 | Supply and fix 4mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed. |
| 34 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions(fixed portion) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fastners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top , bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth , rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, CP brass/stainless steel screws,complete all as specified and directed. |
| 35 | Supply and fix 5.50mm thick sheet glass ordinary quality, glazing with aluminium beads in square/rectangular exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed. |
| 36 | S&F 6mm thick Aluminium composite panel (ACP) board as in panelling with aluminium partions ,complete all as specified and directed. |
| 37 | Supply, fabricated and fixing with premium plus High Density Moisture Resistant (HDMR) premium board ,one side decorative lamination and other side balancing white,100% termite proof, 20mm thick, heavy density, exterior grade, cutting, fabricating and suitably fixing for kitchen cabinets and shelves of any size darwers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as speified and directed as under:-(a) Stainless steel handle fancy type 100mm size.(b) Stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation.(c) Magnet of suitable size fixed for cabinet leafs, drawers.Make: Century Ply board/ Green Ply/Bhutan Board or equivalent .Note :- The rate includes BWP Ply board and all connecting items mentioned above and the design and pattern should be approved by GE. |
| 38 | Supply only stainless steel handle fancy type 100mm size complete all as specified and directed. |
| 39 | Supply only stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation complete all as specified and directed. |
| 40 | Supply only magnet catchers suitable size for cabinet leafs and drawers complete all as specified and directed. |
| 41 | Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed |
| 42 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 43 | Supply and fix rolled mild steel Fe-410 (Grade E-250A) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of gaps/cuts/holes in each post for providing/laying barbed wire and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed. (Note :- Supply and fix barbed wire shall be measured and paid separately) |
| 44 | Dismantling of old GI barbed wire fencing of any description from RCC fencing post complete all as specified & directed. (Note. Each line of wire to be measured separately) |
| 45 | Supply & fixing Galvanized, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type or standard rails. straining bolts including, securing or tying at crossings with and provn of galvanized mild steel wire staples or steel pins etc complete all as specified and directed (Note : Each line of wire to be measured seperately) |
| 46 | Demolition of cement concrete in any description and in any position not otherwise specifically provided for ,complete all as specified and as directed. |
| 47 | Material and Labour for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) for fixing of angle etc including necessary form work complete all as specified and as directed . |
| 48 | Material and Labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in bed block, coping , kerbs, rounded or chamfered on edge including necessary form work complete all as specified and as directed . |
| 49 | Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified & directed. |
| 50 | Taking down carefully copper / aluminium point wiring any type complete, including fixture and fittings any type removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed. |
| 51 | Material and labour for point wiring (concealed type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular metallic inner base plate and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for One light point controlled by one switch complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, wiring,ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. |
| 52 | All as per Item No. 51 above but for one 3/5pin 6 Amp Socket outlet on the independent board complete all as specified as directed. |
| 53 | All as per Item No. 51 above but for one 3/5pin 6 Amp Socket outlet on the same board complete all as specified as directed. |
| 54 | All as per item no 51 above but for FRLSH PVC insulated 1100 volts grade unsheathed single core multistranded copper conductors 2.5 sqmm for fixing of 16 A switches, sockets, etc complete all as specified as directed. |
| 55 | Material and labour for sub-main wiring (Concealed type) with FRLSH two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as earth continuity wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site complete all as specified and as directed.(Note: Three run of 4.0sqmm copper conductor and One run PVC conduit shall measured as one unit) |
| 56 | Material and labour for sub-main wiring (Concealed type) with FRLSH four run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as earth continuity wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site complete all as specified and as directed.(Note: Five run of 4.0sqmm copper conductor and One run PVC conduit shall measured as one unit) |
| 57 | S&F tempra plug and socket DB 32 A 3P+N+E 8 module complete all as specified and directed. Make: Legrand Cat no 507862 or equivalent in Schneider/GM/Siemens |
| 58 | S&F DB mounting socket inclined outlet 415 volt 32A 3P+N+E complete all as specified and directed. Make: Legrand Cat no 555289 or equivalent in Schneider/GM/Siemens |
| 59 | S&F tempra pro straight plugs 415 volt 32A 3P+N+E complete all as specified and directed. Make: Legrand Cat no 555239 or equivalent in Schneider/GM/Siemens |
| 60 | Supply & fix Modular switch, one way, 6 Amp, 1 module complete all as specified and directed. |
| 61 | Supply & fix Modular switch, one way, 16 Amp, 1 module complete all as specified and directed. |
| 62 | Supply & fix Modular socket, 6A-2/3 pin combined 2 Module complete all as specified and directed. |
| 63 | Supply & fix Modular socket, 6A/16A-2/3 pin combined 2 Module complete all as specified and directed. |
| 64 | Supply & fix Modular electronic fan stepped regulator, 120 watt, 2 module complete all as specified and directed. |
| 65 | Supply and fix Modular white cover plate with metal frame- 3 Module complete all as specified and directed. |
| 66 | Supply and fix Modular white cover plate with metal frame- 4 Module complete all as specified and directed. |
| 67 | Supply and fix Modular white cover plate with metal frame- 8 Module complete all as specified and directed. |
| 68 | Supply and fix Modular white cover plate with metal frame- 12 Module complete all as specified and directed. (Make of item No 60 to 68 :- Myrius model of Legrand or equivalent in Siemens/Gold Medal/Schneider) |
| 69 | Supply and fix celling rose surface, 3 terminal ISI marked complete all as specified and directed. |
| 70 | S & F LED luminiare round type, 15 watt, 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holder and LED lamp sutiable for roof ceiling including connecting up with driver three core flexible copper conductor cable of sutiable size complete all as specified and directed. |
| 71 | S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed.(Cat No 408587-95, Make: Legrand or equivalent in L&T/Hager/Schneider) |
| 72 | Supply and fix MCB single pole & neutral 40 to 63 Amps, 240 volts, 10KA 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.(Cat No 408618, Make: Legrand or equivalent in L&T/Hager/Schneider) |
| 73 | Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 12 way, 240 volts complete all as specified and directed. (Cat No 507612, Make: Legrand or equivalent in L&T/Hager/Schneider) |
| 74 | Supply and fix MCB triple pole & neutral 16-32 amps, 415 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.(Cat No 408677-80, Make: Legrand or equivalent in L&T/Hager/Schneider) |
| 75 | Supply and fix vertical TPN DB with MCCB incomer of 4 way in double door suitable for four pole MCCB (63A/100A) as incomer including MCCB+12 modules incoming and outgoing making good the damaged surface/wall including reconnection with existing earth wire to DB complete all as specified and as directed.(Note:- MCCB shall be measured and paid seperately). (Make: Cat No. 507745 of Legrand or equivalent in L&T/Hager/Schneider) |
| 76 | Supply and fix MCCB triple pole & neutral 40-100 amps,16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door with proper size of aluminium lugs complete all as specified as directed. (Make: Cat No 420015, of Legrand or equivalent in L&T/Hager/Schneider) |
| 77 | S&F TPN DB-7/8 segment IP 42 IK09 suitable for 160A MCCB as incomer 4W complete all as specified as directed. ( Make: Legrand Cat no 507895,or equivalent in L&T/Hager/Schneider) |
| 78 | Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 35 Sqmm 3.5 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection complete all as specified and directed. |
| 79 | Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc as per electrical plate No 3 of SSR Pt I complete all as specified as directed. Please Enable Macros to View BoQ information |
