|
| 1 | Supply of Consumable Items |
| 2 | LDR Sensor Module(Compatible with Arduino Board) |
| 3 | IR Sensor Module(Compatible with Arduino Board) |
| 4 | Color LED(Compatible with Arduino Board) |
| 5 | Ultrasonic Sensor Module(Compatible with Arduino Board) |
| 6 | Gas/Smoke Sensor Module(Compatible with Arduino Board) |
| 7 | Vibration Sensor Module(Compatible with Arduino Board) |
| 8 | Buzzer(Working Voltage: 3.5-5.5v, Working Current: <25mA, PCB Dimension: 1.85 x 1.5 cm (L x W) |
| 9 | Humidity & Temperature Sensor (DHT11)(Compatible with Arduino Board) |
| 10 | Motion Detector Sensor PIR(Compatible with Arduino Board) |
| 11 | Relay Sensor Module(Number of relays: 4, compatible with Arduino Board) |
| 12 | Soil Moisture Sensor Module(Compatible with Arduino Board) |
| 13 | Fire Sensor Module(Compatible with Arduino Board) |
| 14 | Piezo Speaker(Operating Voltage: 3.3V-5.0V, Operating Frequency: 2.048kHz, Sound Output: 85dB, Dimensions: 20mm x 15mm x 7mm) |
| 15 | Seven Segment Board(Display Type: Common Cathode (CC)/Common Anode (CA), Forward Voltage: 1.6v to 3.3v, Operating Current: 10mA) |
| 16 | LCD(Display Capacity: Typically 16 Characters by 2 Lines (16x2), Compatible with Arduino Board) |
| 17 | Potentiometer(Supply Voltage: 3v-5v, Total Resistance: 10kΩ (200 ohms)) |
| 18 | ESP32 with USB Cable(Dual-core Xtensa LX6 processor (up to 240 MHz),SRAM:520 KB of SRAMROM: 448 KBWi-Fi: Supports 802.11 b/g/n std in the 2.4 GHz band.Bluetooth: Bluetooth v4.2 BR/EDR and Bluetooth Low Energy (BLE)USB cable) |
| 19 | Raspberry Pi 4(Processor: Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHzMemory: 1GB/2GB/4GB LPDDR4-3200 SDRAMWireless: 2.4 GHz and 5.0 GHz IEEE 802.11acBluetooth: Bluetooth 5.0, BLEEthernet: Gigabit EthernetUSB Ports: 2 × USB 3.0 ports, 2 × USB 2.0 portsDisplay Output: 2 × micro-HDMI® ports (supports up to 4Kp60)Camera Port: 2-lane MIPI CSI portStorage: Micro-SD card slotPower: 5V DC via USB-C connector (3A minimum) or GPIO headerGPIO: Standard 40-pin GPIO header) |
| 20 | DC Adapter(2-flat-pin plug220V input voltage / 5V DC 1A output voltage) |
| 21 | Mini water Pump (compatible with Arduino Board) |
| 22 | I2C adaptor (compatible with Arduino Board) |
| 23 | Bluetooth(compatible with Arduino Board) |
| 24 | Arduino Nano(IC: Microchip ATmega328P (8-bit AVR core)Clock Speed: 16 MHz (on Nano board)Flash memory: 32 KBSRAM: 2 KB) |
| 25 | Arduino Uno with USB cable(Board Type: Arduino Uno (or compatible)Microcontroller: ATmega328PUSB Port: USB-B (standard for official boards)Cable Type: USB 2.0 Type-A to Type-B) |
| 26 | Arduino Jumper Wire(Configurations: Male-to-Male (M-M)) |
| 27 | Arduino Jumper Wire(Configurations: Male-to-Female (M-F)) |
| 28 | Arduino Jumper Wire(Configurations: Female-to-Female (F-F)) |
| 29 | Gigabit Ethernet Switch(Managed Switch,16 Gigabit Ethernet RJ45 Ports,4 SFP Slots,2 Gigabit Ethernet Combo, ETHERNET PORT CONFIGURATION: 24-port 10/100/1000, 4 x 1G uplinks (SFP),CONTROL: Easy-to-use on-box WebUI, CLI, SNMP, PnP, Auto Smartports, auto-discovery, zero-touch deployment,ADVANCED SECURITY: 802.1x including DVA, Web-based Authentication, MAB, Private VLAN, IPv6 First Hop Security, IP Source Guard, SCT (CoPP), Storm Control,Protocol Support :Static routing,RIPv2,BGP,OSPFv3,PBR,RIPv1,OSPFv2,RIPng.--25K) Please Enable Macros to View BoQ information |
