|
| 1 | Dismantling/taking out existing old unserviceable 300/200/150 mm pipe line from PCC base /iron support/on ground from existing line complete all as specified and directed. |
| 2 | Supply, fabrication, testing and commissioning of MS pipe line (ERW) of 300 mm dia 7.9 mm thick as per IS 3589:2001 including MS specials such as bends tees etc excluding flange joints complete all as specified and directed. |
| 3 | All as per item No. 2.00 above, but of size 200 mm dia. |
| 4 | Material and labour for supply/fixing/testing of MS pipe line 150mm dia Medium grade including MS specials but excluding flanged joint with flanges measured under relevent item and taking out old u/s pipe line complete all as specified and directed. |
| 5 | Taking down old U/S GI pipe of including short length (up to 6m) from gallaries/walls and supply and fix GI pipe Medium grade 100 mm bore galvanized with all fittings such as tees, bend, elbows, sockets reducer, nipples and union all as specified and directed. |
| 6 | Excavation in trenches not exc 1.5 M in wide and depth for carrying out repairs to jointing pipe and getting out in soft loose soil including dewatering of sub soil water all as specified and directed. |
| 7 | All as per item No. 5.00 above, but exc, 1.5 M in wide/depth but not exc 3.0 M in soft / loose soil |
| 8 | All as per item No. 5.00 above, but in Soft/Disintegrated rock( For road /hard standing cutting). |
| 9 | Returning, filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 cm all as specified and directed. |
| 10 | Removing excavted soil not exceeding 50M and depositing where directed at level not exceeding 1.5 M above the starting point all as specified and directed. |
| 11 | Material & labour for PCC (1:2:4), type B1 (using 20 mm graded stone aggregate) as in pillar to support the pipe lines including necessary form work and finishing the exposed surfaces of concrete fair and even all as specified and directed |
| 12 | Material and labour for replacement of flange joints gusket suitable for CI/MS/DI flanged water mains after dismantling at least 12mtr pipe at both side of joint and jointing with new rubber gasket nuts, bolts and washers including taking out old perished rubber gasket, nuts bolts and washers for 300 mm bore pipe complete all as specified and directed. |
| 13 | All as per item No. 12.00 above, but of size 200 mm bore |
| 14 | All as per item No. 12.00 above, but of size 150mm bore |
| 15 | Supply only DI/CI/MS fittings for water pipe line such bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs including taking out broken CI /MS specials upto 300mm bore all as specified and directed. |
| 16 | M& L for painting to old / new steel surfaces of MS/GI pipe lines with one coat of synthetic enamel paint including preparation of surfaces complete all as specified and directed. |
| 17 | Material & labour for rectification of leakage lead joint of CI pipe including taking out old unserviceable lead joint of the pipe size 300 mm bore, complete new joint with spun yard and lead including using retrived lead complete all as specified and directed. |
| 18 | All as per item No. above, but of size 200 mm bore |
| 19 | Material and labourr for mild steel framed work with ends of bars souldered, welded or reveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valvepit and similar work confirming to Fe.290.Gde-E-165 incl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided for all as specified and directed. Please Enable Macros to View BoQ information |
| 20 | Material and labourr for mild steel framed work with ends of bars souldered, welded or reveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valvepit and similar work confirming to Fe.290.Gde-E-165 incl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided for all as specified and directed. Please Enable Macros to View BoQ information |
