|
| 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge. |
| 2 | Dismantling timber scantling as in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section in framed work, in any position complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or beads complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L for Plain fillets of second class soft wood (KAIL), sectional area not exceeding 3 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F suspended false ceiling system using acoustic exposed G.I. hot dipped galvanised power coated grid system metalic (E Grid) exposed suspended system, grid section size 600mm x 600 mm, comprising of GI powder coated Main Runner of diamensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 + PPPCGS/ 0.3mm & weight of runner 1.35 Kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick and wall angle 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.4 + PPPCGS /0.3 mm & weight of Tee of 0.195 kg for 600mm length) and wall angle of diamensions 22.2mm x 22.2mm x 3050 mm x 0.65mm thick (Thickness comprissing of GI/0.35 + PPPCGS/0.3mm & weight of angle 0.70Kg for 3050mm length) with grid system duly suspended with 4mm dia GI wire hangers fixed with steel-through fasterner from purlin of the roof complete all as specified and directed by Engr-in-Charge.Make:- Armstrong, Gyproc |
| 7 | M&L for 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600x600mm grid complete all as specified and directed by Engr-in-Charge.(Frame work for ceiling shall be measured and paid separately) |
| 8 | All as Srl Item No.07 here-in-before but fixing only except material (Retrived material obtained from item No 1 will be used) complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L factory made second class soft wood wooden battens kiln dried spruce or pine profiled lumber, not less than 12mm thick, length 3000mm & width 110-120 mm insert each other with male and female grooves fixed with nails to timber frame work as in wall/ceiling paneling, shelves etc including dismantling old wall/ceiling board any type and applying under coating and finishing coats of wood polishing complete all as specified and directed by Engr-in-Charge.(Make-Beliy Ruchey or equivalent) |
| 10 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L laminated wooden flooring 8mm thick size 193x 1214mm of High density hard wood fibre board (HDF) with highly anti abrasive protective overlay and melamine impregnated decorative film with interlocking system, laid over 2mm thick foam with suitable arrangement including dismantling of existing old one complete all as specified and directed by Engr-in-Charge. |
| 13 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 14 | Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 sqm but not 4 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 15 | Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed by Engr-in-Charge. |
| 16 | Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,incl taking out old section, all complete as per architectural drawings complete all as specified and directed by Engr-in-Charge. |
| 18 | S&F Sheet glass of 4.8mm thickness, ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane complete all as specified and directed by Engineer-in-Charge |
| 19 | S&F 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, complete all as specified and directed by Engineer-in-Charge |
| 20 | S&F in repair Door closer hydraulic of aluminium (die cast) body regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge |
| 21 | S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass complete all as specified and directed by Engr-in-Charge.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 23 | S&F factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] complete all as specified and directed by Engr-in-Charge.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 24 | S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class soft wood (KAIL) complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F 35 mm thick 2nd class soft wood (KAIL) plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F 30 mm thick 2nd class soft wood (KAIL) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F 100mm mild steel butt hinges medium weight , cold rolled complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F 75mm mild steel butt hinges medium weight , cold rolled complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F 200mm long Aluminium anodisedl barrel tower bolt of extruded section and fixed complete all as specified and as directed |
| 30 | S&F 150mm long Aluminium anodisedl barrel tower bolt of extruded section and fixed complete all as specified and as directed |
| 31 | S&F 125mm extruded aluminium alloy handles febricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F 100mm extruded aluminium alloy handles febricated type anodised complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F 300mm Aluminium alloy, anodised,sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 34 | Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F 4mm thick glass pan ordinary quality and glazing with oil putty in square not exc 0.5 sqm each pane complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F in repair cabinet mirror 5mm thick of selected quality glass, mounted on 6 mm thick ply and around wooden beading polished complete all as specified and directed by Engineer-in-Charge |
| 37 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for preparation of new wood and wood based material surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge |
| 39 | M&L for prepration of old painted surface of wood and wood based material and one coat of synthetic enamel paint of any description, not otherwise described over 10cm width or girth complete all as specified and as directed by Engineer-in-Charge |
| 40 | Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. |
| 41 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5 Sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2 mm thick PVC casing caping with all accessories and 1.5 Sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate, flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch. |
| 42 | All as per Srl item No 41.00 here in before but for one 3 pin 5 Amps switch socket on same board. |
| 43 | All as per Srl item No 41.000 here in before but using cable size 2.5Sqmm for one 3 pin socket outlet 5 Amps independent board. |
| 44 | All as per Srl item No 41.00here in before but using cable size 2.5Sqmm for one 3 pin socket outlet 15 Amps independent board. |
| 45 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5 Sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including PVC conduit min 20mm dia medium grade with all accessories and 1.5 Sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate, flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch. |
| 46 | All as per Srl item No 45.00 here in before but for one 3 pin 5 Amps switch socket on same board. |
| 47 | All as per Srl item No 45.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board. |
| 48 | All as per Srl item No 45.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. |
| 49 | S&F in replacement switch piano flush type 5 Amps, single pole one way complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F in replacement socket outlet 2 in 1, 6 Amp flush type complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in replacement switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F in replacement switch socket combination 2 in 1, 5 and 15 Amps flush type complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in replacement bell push, flush type, 5 Amp complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F in replacement ceiling rose surface bakelite 65x50mm, two to three terminals complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F in replacement lamp holder, insulated body with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F in replacement electronic Ding Dong Bell, AC 240 volts single pole, complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F in replacement modular switch 1 way 6A, 1 module complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F in replacement modular socket 6A-2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F in replacement modular switch 1 way 16A, 1 module complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in replacement modular socket 6A/16 A -2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F in replacement modular bell Push 6A 1 Module complete all as specified and directed by Engr-in-Charge. Note for Item No-57 to 61: Cost of items required for fixing modular switch, sockets shall be included in over all cost quoted. |
| 62 | S&F in replacement of plug top 5 Amp 230 Volt AC complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in replacement of plug top 15 Amp 230 Volt AC complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 12 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required. complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F in replacement 240V, 10 KA C curve MCB SPN 40 to 63 Amp in the existing MCB DB with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in replacement 240 V 10 KA C curve MCB SP 5 to 32 Amp in the existing MCB DB with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for submain wiring comprising single core, 2 Runs of 4.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 25mm dia. PVC conduit/ PVC Casing Caping ISI Marked(heavy duty) and its fittings on surface/recessed complete including provision of 1X4.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS complete all as specified and directed by Engr-in-Charge.(Note:- Extra length of cables/ wire required for connection to MCBs shall not be paid separately and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 70 | M&L for submain wiring comprising single core, 2 Runs of 6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 25mm dia. PVC conduit/ PVC Casing Caping ISI Marked(heavy duty) and its fittings on surface/recessed complete including provision of 1X6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS complete all as specified and directed by Engr-in-Charge.(Note :- Extra length of cables/ wire required for connection to MCBs shall not be paid separately and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 71 | S&F in replacement 1100 volts grade heavy duty 6sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F in replacement 1100 volts grade heavy duty 16 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F in replacement LED 1x18 Watt, 220 V, Cool Daylight (6000-7000K) , AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.Make- Havells/Crompton/Polycab or equivalent in approved make. |
| 75 | S&F in replacement LED 1x18 Watt, 220 V, Warm White (3000K) , AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as speicifed and directed. Make- Havells/Crompton/Polycab or equivalent in approved make. |
| 76 | S&F in replacement round shape/Square shape(As per site requirement) 12 watt 220 volts AC recessed type (Cool day/warm light) with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.Make- Havells/Crompton/Polycab or equivalent in approved make. |
| 77 | S&F in replacement LED light fitting 1x9W/10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F in replacment LED 3 watt 3000K metal & synthetic bed side light complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F in replacement exhaust fan, steel body, AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F in replacement LED luminarie 600x600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge. |
| 82 | Note : Deduction for amount of Rs. 54870.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract. Please Enable Macros to View BoQ information |
